powerpc/security/entry_flush.c

0001 // SPDX-License-Identifier: GPL-2.0+
0002
0003 /*
0004  * Copyright 2018 IBM Corporation.
0005  */
0006
0007 #define __SANE_USERSPACE_TYPES__
0008
0009 #include <sys/types.h>
0010 #include <stdint.h>
0011 #include <malloc.h>
0012 #include <unistd.h>
0013 #include <signal.h>
0014 #include <stdlib.h>
0015 #include <string.h>
0016 #include <stdio.h>
0017 #include "utils.h"
0018 #include "flush_utils.h"
0019
0020 int entry_flush_test(void)
0021 {
0022     char *p;
0023     int repetitions = 10;
0024     int fd, passes = 0, iter, rc = 0;
0025     struct perf_event_read v;
0026     __u64 l1d_misses_total = 0;
0027     unsigned long iterations = 100000, zero_size = 24 * 1024;
0028     unsigned long l1d_misses_expected;
0029     int rfi_flush_orig;
0030     int entry_flush, entry_flush_orig;
0031
0032     SKIP_IF(geteuid() != 0);
0033
0034     // The PMU event we use only works on Power7 or later
0035     SKIP_IF(!have_hwcap(PPC_FEATURE_ARCH_2_06));
0036
0037     if (read_debugfs_file("powerpc/rfi_flush", &rfi_flush_orig) < 0) {
0038         perror("Unable to read powerpc/rfi_flush debugfs file");
0039         SKIP_IF(1);
0040     }
0041
0042     if (read_debugfs_file("powerpc/entry_flush", &entry_flush_orig) < 0) {
0043         perror("Unable to read powerpc/entry_flush debugfs file");
0044         SKIP_IF(1);
0045     }
0046
0047     if (rfi_flush_orig != 0) {
0048         if (write_debugfs_file("powerpc/rfi_flush", 0) < 0) {
0049             perror("error writing to powerpc/rfi_flush debugfs file");
0050             FAIL_IF(1);
0051         }
0052     }
0053
0054     entry_flush = entry_flush_orig;
0055
0056     fd = perf_event_open_counter(PERF_TYPE_HW_CACHE, PERF_L1D_READ_MISS_CONFIG, -1);
0057     FAIL_IF(fd < 0);
0058
0059     p = (char *)memalign(zero_size, CACHELINE_SIZE);
0060
0061     FAIL_IF(perf_event_enable(fd));
0062
0063     // disable L1 prefetching
0064     set_dscr(1);
0065
0066     iter = repetitions;
0067
0068     /*
0069      * We expect to see l1d miss for each cacheline access when entry_flush
0070      * is set. Allow a small variation on this.
0071      */
0072     l1d_misses_expected = iterations * (zero_size / CACHELINE_SIZE - 2);
0073
0074 again:
0075     FAIL_IF(perf_event_reset(fd));
0076
0077     syscall_loop(p, iterations, zero_size);
0078
0079     FAIL_IF(read(fd, &v, sizeof(v)) != sizeof(v));
0080
0081     if (entry_flush && v.l1d_misses >= l1d_misses_expected)
0082         passes++;
0083     else if (!entry_flush && v.l1d_misses < (l1d_misses_expected / 2))
0084         passes++;
0085
0086     l1d_misses_total += v.l1d_misses;
0087
0088     while (--iter)
0089         goto again;
0090
0091     if (passes < repetitions) {
0092         printf("FAIL (L1D misses with entry_flush=%d: %llu %c %lu) [%d/%d failures]\n",
0093                entry_flush, l1d_misses_total, entry_flush ? '<' : '>',
0094                entry_flush ? repetitions * l1d_misses_expected :
0095                repetitions * l1d_misses_expected / 2,
0096                repetitions - passes, repetitions);
0097         rc = 1;
0098     } else {
0099         printf("PASS (L1D misses with entry_flush=%d: %llu %c %lu) [%d/%d pass]\n",
0100                entry_flush, l1d_misses_total, entry_flush ? '>' : '<',
0101                entry_flush ? repetitions * l1d_misses_expected :
0102                repetitions * l1d_misses_expected / 2,
0103                passes, repetitions);
0104     }
0105
0106     if (entry_flush == entry_flush_orig) {
0107         entry_flush = !entry_flush_orig;
0108         if (write_debugfs_file("powerpc/entry_flush", entry_flush) < 0) {
0109             perror("error writing to powerpc/entry_flush debugfs file");
0110             return 1;
0111         }
0112         iter = repetitions;
0113         l1d_misses_total = 0;
0114         passes = 0;
0115         goto again;
0116     }
0117
0118     perf_event_disable(fd);
0119     close(fd);
0120
0121     set_dscr(0);
0122
0123     if (write_debugfs_file("powerpc/rfi_flush", rfi_flush_orig) < 0) {
0124         perror("unable to restore original value of powerpc/rfi_flush debugfs file");
0125         return 1;
0126     }
0127
0128     if (write_debugfs_file("powerpc/entry_flush", entry_flush_orig) < 0) {
0129         perror("unable to restore original value of powerpc/entry_flush debugfs file");
0130         return 1;
0131     }
0132
0133     return rc;
0134 }
0135
0136 int main(int argc, char *argv[])
0137 {
0138     return test_harness(entry_flush_test, "entry_flush_test");
0139 }