0001 /*
0002 * P1025 RDB Device Tree Source (32-bit address map)
0003 *
0004 * Copyright 2011 Freescale Semiconductor Inc.
0005 *
0006 * Redistribution and use in source and binary forms, with or without
0007 * modification, are permitted provided that the following conditions are met:
0008 * * Redistributions of source code must retain the above copyright
0009 * notice, this list of conditions and the following disclaimer.
0010 * * Redistributions in binary form must reproduce the above copyright
0011 * notice, this list of conditions and the following disclaimer in the
0012 * documentation and/or other materials provided with the distribution.
0013 * * Neither the name of Freescale Semiconductor nor the
0014 * names of its contributors may be used to endorse or promote products
0015 * derived from this software without specific prior written permission.
0016 *
0017 *
0018 * ALTERNATIVELY, this software may be distributed under the terms of the
0019 * GNU General Public License ("GPL") as published by the Free Software
0020 * Foundation, either version 2 of that License or (at your option) any
0021 * later version.
0022 *
0023 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
0024 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
0025 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
0026 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
0027 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
0028 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
0029 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
0030 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
0031 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
0032 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
0033 */
0034
0035 /include/ "p1021si-pre.dtsi"
0036 / {
0037 model = "fsl,P1025RDB";
0038 compatible = "fsl,P1025RDB";
0039
0040 memory {
0041 device_type = "memory";
0042 };
0043
0044 lbc: localbus@ffe05000 {
0045 reg = <0 0xffe05000 0 0x1000>;
0046
0047 /* NOR, NAND Flashes */
0048 ranges = <0x0 0x0 0x0 0xef000000 0x01000000
0049 0x1 0x0 0x0 0xff800000 0x00040000>;
0050 };
0051
0052 soc: soc@ffe00000 {
0053 ranges = <0x0 0x0 0xffe00000 0x100000>;
0054 };
0055
0056 pci0: pcie@ffe09000 {
0057 ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000
0058 0x1000000 0x0 0x00000000 0 0xffc10000 0x0 0x10000>;
0059 reg = <0 0xffe09000 0 0x1000>;
0060 pcie@0 {
0061 ranges = <0x2000000 0x0 0xe0000000
0062 0x2000000 0x0 0xe0000000
0063 0x0 0x20000000
0064
0065 0x1000000 0x0 0x0
0066 0x1000000 0x0 0x0
0067 0x0 0x100000>;
0068 };
0069 };
0070
0071 pci1: pcie@ffe0a000 {
0072 reg = <0 0xffe0a000 0 0x1000>;
0073 ranges = <0x2000000 0x0 0xe0000000 0 0xe0000000 0x0 0x20000000
0074 0x1000000 0x0 0x00000000 0 0xffc00000 0x0 0x10000>;
0075 pcie@0 {
0076 ranges = <0x2000000 0x0 0xe0000000
0077 0x2000000 0x0 0xe0000000
0078 0x0 0x20000000
0079
0080 0x1000000 0x0 0x0
0081 0x1000000 0x0 0x0
0082 0x0 0x100000>;
0083 };
0084 };
0085
0086 qe: qe@ffe80000 {
0087 ranges = <0x0 0x0 0xffe80000 0x40000>;
0088 reg = <0 0xffe80000 0 0x480>;
0089 brg-frequency = <0>;
0090 bus-frequency = <0>;
0091 status = "disabled"; /* no firmware loaded */
0092
0093 enet3: ucc@2000 {
0094 device_type = "network";
0095 compatible = "ucc_geth";
0096 rx-clock-name = "clk12";
0097 tx-clock-name = "clk9";
0098 pio-handle = <&pio1>;
0099 phy-handle = <&qe_phy0>;
0100 phy-connection-type = "mii";
0101 };
0102
0103 mdio@2120 {
0104 qe_phy0: ethernet-phy@0 {
0105 interrupt-parent = <&mpic>;
0106 interrupts = <4 1 0 0>;
0107 reg = <0x6>;
0108 };
0109 qe_phy1: ethernet-phy@3 {
0110 interrupt-parent = <&mpic>;
0111 interrupts = <5 1 0 0>;
0112 reg = <0x3>;
0113 };
0114 tbi-phy@11 {
0115 reg = <0x11>;
0116 device_type = "tbi-phy";
0117 };
0118 };
0119
0120 enet4: ucc@2400 {
0121 device_type = "network";
0122 compatible = "ucc_geth";
0123 rx-clock-name = "none";
0124 tx-clock-name = "clk13";
0125 pio-handle = <&pio2>;
0126 phy-handle = <&qe_phy1>;
0127 phy-connection-type = "rmii";
0128 };
0129 };
0130 };
0131
0132 /include/ "p1025rdb.dtsi"
0133 /include/ "p1021si-post.dtsi"
