arm64/qcom/ipq8074-hk01.dts

0001 // SPDX-License-Identifier: GPL-2.0-only
0002 /dts-v1/;
0003 /* Copyright (c) 2017, The Linux Foundation. All rights reserved.
0004  */
0005 #include "ipq8074.dtsi"
0006
0007 / {
0008         model = "Qualcomm Technologies, Inc. IPQ8074-HK01";
0009         compatible = "qcom,ipq8074-hk01", "qcom,ipq8074";
0010
0011         aliases {
0012                 serial0 = &blsp1_uart5;
0013                 serial1 = &blsp1_uart3;
0014         };
0015
0016         chosen {
0017                 stdout-path = "serial0";
0018         };
0019
0020         memory@40000000 {
0021                 device_type = "memory";
0022                 reg = <0x0 0x40000000 0x0 0x20000000>;
0023         };
0024
0025         vreg_dummy: regulator-dummy { };
0026 };
0027
0028 &blsp1_i2c2 {
0029         status = "okay";
0030 };
0031
0032 &blsp1_spi1 {
0033         status = "okay";
0034
0035         flash@0 {
0036                 #address-cells = <1>;
0037                 #size-cells = <1>;
0038                 compatible = "jedec,spi-nor";
0039                 reg = <0>;
0040                 spi-max-frequency = <50000000>;
0041         };
0042 };
0043
0044 &blsp1_uart3 {
0045         status = "okay";
0046 };
0047
0048 &blsp1_uart5 {
0049         status = "okay";
0050 };
0051
0052 &pcie0 {
0053         status = "okay";
0054         perst-gpio = <&tlmm 61 0x1>;
0055 };
0056
0057 &pcie1 {
0058         status = "okay";
0059         perst-gpio = <&tlmm 58 0x1>;
0060 };
0061
0062 &pcie_phy0 {
0063         status = "okay";
0064 };
0065
0066 &pcie_phy1 {
0067         status = "okay";
0068 };
0069
0070 &qpic_bam {
0071         status = "okay";
0072 };
0073
0074 &qpic_nand {
0075         status = "okay";
0076
0077         nand@0 {
0078                 reg = <0>;
0079                 nand-ecc-strength = <4>;
0080                 nand-ecc-step-size = <512>;
0081                 nand-bus-width = <8>;
0082         };
0083 };
0084
0085 &sdhc_1 {
0086         status = "okay";
0087 };
0088
0089 &qusb_phy_0 {
0090         status = "okay";
0091 };
0092
0093 &qusb_phy_1 {
0094         status = "okay";
0095 };
0096
0097 &ssphy_0 {
0098         status = "okay";
0099         vdda-phy-supply = <&vreg_dummy>;
0100         vdda-pll-supply = <&vreg_dummy>;
0101 };
0102
0103 &ssphy_1 {
0104         status = "okay";
0105         vdda-phy-supply = <&vreg_dummy>;
0106         vdda-pll-supply = <&vreg_dummy>;
0107 };
0108
0109 &usb_0 {
0110         status = "okay";
0111 };
0112
0113 &usb_1 {
0114         status = "okay";
0115 };