0001 # SPDX-License-Identifier: GPL-2.0-only
0002 menu "SCSI device support"
0003
0004 config SCSI_MOD
0005 tristate
0006 default y if SCSI=n || SCSI=y
0007 default m if SCSI=m
0008
0009 config RAID_ATTRS
0010 tristate "RAID Transport Class"
0011 default n
0012 depends on BLOCK
0013 depends on SCSI_MOD
0014 help
0015 Provides RAID
0016
0017 config SCSI_COMMON
0018 tristate
0019
0020 config SCSI
0021 tristate "SCSI device support"
0022 depends on BLOCK
0023 select SCSI_DMA if HAS_DMA
0024 select SG_POOL
0025 select SCSI_COMMON
0026 select BLK_DEV_BSG_COMMON if BLK_DEV_BSG
0027 help
0028 If you want to use a SCSI hard disk, SCSI tape drive, SCSI CD-ROM or
0029 any other SCSI device under Linux, say Y and make sure that you know
0030 the name of your SCSI host adapter (the card inside your computer
0031 that "speaks" the SCSI protocol, also called SCSI controller),
0032 because you will be asked for it.
0033
0034 You also need to say Y here if you have a device which speaks
0035 the SCSI protocol. Examples of this include the parallel port
0036 version of the IOMEGA ZIP drive, USB storage devices, Fibre
0037 Channel, and FireWire storage.
0038
0039 To compile this driver as a module, choose M here and read
0040 <file:Documentation/scsi/scsi.rst>.
0041 The module will be called scsi_mod.
0042
0043 However, do not compile this as a module if your root file system
0044 (the one containing the directory /) is located on a SCSI device.
0045
0046 config SCSI_DMA
0047 bool
0048 default n
0049
0050 config SCSI_ESP_PIO
0051 bool
0052
0053 config SCSI_NETLINK
0054 bool
0055 default n
0056 depends on NET
0057
0058 config SCSI_PROC_FS
0059 bool "legacy /proc/scsi/ support"
0060 depends on SCSI && PROC_FS
0061 default y
0062 help
0063 This option enables support for the various files in
0064 /proc/scsi. In Linux 2.6 this has been superseded by
0065 files in sysfs but many legacy applications rely on this.
0066
0067 If unsure say Y.
0068
0069 comment "SCSI support type (disk, tape, CD-ROM)"
0070 depends on SCSI
0071
0072 config BLK_DEV_SD
0073 tristate "SCSI disk support"
0074 depends on SCSI
0075 select BLK_DEV_INTEGRITY_T10 if BLK_DEV_INTEGRITY
0076 help
0077 If you want to use SCSI hard disks, Fibre Channel disks,
0078 Serial ATA (SATA) or Parallel ATA (PATA) hard disks,
0079 USB storage or the SCSI or parallel port version of
0080 the IOMEGA ZIP drive, say Y and read the SCSI-HOWTO,
0081 the Disk-HOWTO and the Multi-Disk-HOWTO, available from
0082 <http://www.tldp.org/docs.html#howto>. This is NOT for SCSI
0083 CD-ROMs.
0084
0085 To compile this driver as a module, choose M here and read
0086 <file:Documentation/scsi/scsi.rst>.
0087 The module will be called sd_mod.
0088
0089 Do not compile this driver as a module if your root file system
0090 (the one containing the directory /) is located on a SCSI disk.
0091 In this case, do not compile the driver for your SCSI host adapter
0092 (below) as a module either.
0093
0094 config CHR_DEV_ST
0095 tristate "SCSI tape support"
0096 depends on SCSI
0097 help
0098 If you want to use a SCSI tape drive under Linux, say Y and read the
0099 SCSI-HOWTO, available from
0100 <http://www.tldp.org/docs.html#howto>, and
0101 <file:Documentation/scsi/st.rst> in the kernel source. This is NOT
0102 for SCSI CD-ROMs.
0103
0104 To compile this driver as a module, choose M here and read
0105 <file:Documentation/scsi/scsi.rst>. The module will be called st.
0106
0107 config BLK_DEV_SR
0108 tristate "SCSI CDROM support"
0109 depends on SCSI && BLK_DEV
0110 select CDROM
0111 help
0112 If you want to use a CD or DVD drive attached to your computer
0113 by SCSI, FireWire, USB or ATAPI, say Y and read the SCSI-HOWTO
0114 and the CDROM-HOWTO at <http://www.tldp.org/docs.html#howto>.
0115
0116 Make sure to say Y or M to "ISO 9660 CD-ROM file system support".
0117
0118 To compile this driver as a module, choose M here and read
0119 <file:Documentation/scsi/scsi.rst>.
0120 The module will be called sr_mod.
0121
0122 config CHR_DEV_SG
0123 tristate "SCSI generic support"
0124 depends on SCSI
0125 help
0126 If you want to use SCSI scanners, synthesizers or CD-writers or just
0127 about anything having "SCSI" in its name other than hard disks,
0128 CD-ROMs or tapes, say Y here. These won't be supported by the kernel
0129 directly, so you need some additional software which knows how to
0130 talk to these devices using the SCSI protocol:
0131
0132 For scanners, look at SANE (<http://www.sane-project.org/>). For CD
0133 writer software look at Cdrtools
0134 (<http://cdrtools.sourceforge.net/>)
0135 and for burning a "disk at once": CDRDAO
0136 (<http://cdrdao.sourceforge.net/>). Cdparanoia is a high
0137 quality digital reader of audio CDs (<http://www.xiph.org/paranoia/>).
0138 For other devices, it's possible that you'll have to write the
0139 driver software yourself. Please read the file
0140 <file:Documentation/scsi/scsi-generic.rst> for more information.
0141
0142 To compile this driver as a module, choose M here and read
0143 <file:Documentation/scsi/scsi.rst>. The module will be called sg.
0144
0145 If unsure, say N.
0146
0147 config BLK_DEV_BSG
0148 bool "/dev/bsg support (SG v4)"
0149 depends on SCSI
0150 default y
0151 help
0152 Saying Y here will enable generic SG (SCSI generic) v4 support
0153 for any SCSI device.
0154
0155 This option is required by UDEV to access device serial numbers, etc.
0156
0157 If unsure, say Y.
0158
0159 config CHR_DEV_SCH
0160 tristate "SCSI media changer support"
0161 depends on SCSI
0162 help
0163 This is a driver for SCSI media changers. Most common devices are
0164 tape libraries and MOD/CDROM jukeboxes. *Real* jukeboxes, you
0165 don't need this for those tiny 6-slot cdrom changers. Media
0166 changers are listed as "Type: Medium Changer" in /proc/scsi/scsi.
0167 If you have such hardware and want to use it with linux, say Y
0168 here. Check <file:Documentation/scsi/scsi-changer.rst> for details.
0169
0170 If you want to compile this as a module ( = code which can be
0171 inserted in and removed from the running kernel whenever you want),
0172 say M here and read <file:Documentation/kbuild/modules.rst> and
0173 <file:Documentation/scsi/scsi.rst>. The module will be called ch.o.
0174 If unsure, say N.
0175
0176 config SCSI_ENCLOSURE
0177 tristate "SCSI Enclosure Support"
0178 depends on SCSI && ENCLOSURE_SERVICES
0179 depends on m || SCSI_SAS_ATTRS != m
0180 help
0181 Enclosures are devices sitting on or in SCSI backplanes that
0182 manage devices. If you have a disk cage, the chances are that
0183 it has an enclosure device. Selecting this option will just allow
0184 certain enclosure conditions to be reported and is not required.
0185
0186 config SCSI_CONSTANTS
0187 bool "Verbose SCSI error reporting (kernel size += 36K)"
0188 depends on SCSI
0189 help
0190 The error messages regarding your SCSI hardware will be easier to
0191 understand if you say Y here; it will enlarge your kernel by about
0192 36 KB. If in doubt, say Y.
0193
0194 config SCSI_LOGGING
0195 bool "SCSI logging facility"
0196 depends on SCSI
0197 help
0198 This turns on a logging facility that can be used to debug a number
0199 of SCSI related problems.
0200
0201 If you say Y here, no logging output will appear by default, but you
0202 can enable logging by saying Y to "/proc file system support" and
0203 "Sysctl support" below and executing the command
0204
0205 echo <bitmask> > /proc/sys/dev/scsi/logging_level
0206
0207 where <bitmask> is a four byte value representing the logging type
0208 and logging level for each type of logging selected.
0209
0210 There are a number of logging types and you can find them in the
0211 source at <file:drivers/scsi/scsi_logging.h>. The logging levels
0212 are also described in that file and they determine the verbosity of
0213 the logging for each logging type.
0214
0215 If you say N here, it may be harder to track down some types of SCSI
0216 problems. If you say Y here your kernel will be somewhat larger, but
0217 there should be no noticeable performance impact as long as you have
0218 logging turned off.
0219
0220 config SCSI_SCAN_ASYNC
0221 bool "Asynchronous SCSI scanning"
0222 depends on SCSI
0223 help
0224 The SCSI subsystem can probe for devices while the rest of the
0225 system continues booting, and even probe devices on different
0226 busses in parallel, leading to a significant speed-up.
0227
0228 You can override this choice by specifying "scsi_mod.scan=sync"
0229 or async on the kernel's command line.
0230
0231 Note that this setting also affects whether resuming from
0232 system suspend will be performed asynchronously.
0233
0234 menu "SCSI Transports"
0235 depends on SCSI
0236
0237 config SCSI_SPI_ATTRS
0238 tristate "Parallel SCSI (SPI) Transport Attributes"
0239 depends on SCSI
0240 help
0241 If you wish to export transport-specific information about
0242 each attached SCSI device to sysfs, say Y. Otherwise, say N.
0243
0244 config SCSI_FC_ATTRS
0245 tristate "FiberChannel Transport Attributes"
0246 depends on SCSI && NET
0247 select BLK_DEV_BSGLIB
0248 select SCSI_NETLINK
0249 help
0250 If you wish to export transport-specific information about
0251 each attached FiberChannel device to sysfs, say Y.
0252 Otherwise, say N.
0253
0254 config SCSI_ISCSI_ATTRS
0255 tristate "iSCSI Transport Attributes"
0256 depends on SCSI && NET
0257 select BLK_DEV_BSGLIB
0258 help
0259 If you wish to export transport-specific information about
0260 each attached iSCSI device to sysfs, say Y.
0261 Otherwise, say N.
0262
0263 config SCSI_SAS_ATTRS
0264 tristate "SAS Transport Attributes"
0265 depends on SCSI
0266 select BLK_DEV_BSGLIB
0267 help
0268 If you wish to export transport-specific information about
0269 each attached SAS device to sysfs, say Y.
0270
0271 source "drivers/scsi/libsas/Kconfig"
0272
0273 config SCSI_SRP_ATTRS
0274 tristate "SRP Transport Attributes"
0275 depends on SCSI
0276 help
0277 If you wish to export transport-specific information about
0278 each attached SRP device to sysfs, say Y.
0279
0280 endmenu
0281
0282 menuconfig SCSI_LOWLEVEL
0283 bool "SCSI low-level drivers"
0284 depends on SCSI!=n
0285 default y
0286
0287 if SCSI_LOWLEVEL && SCSI
0288
0289 config ISCSI_TCP
0290 tristate "iSCSI Initiator over TCP/IP"
0291 depends on SCSI && INET
0292 select CRYPTO
0293 select CRYPTO_MD5
0294 select CRYPTO_CRC32C
0295 select SCSI_ISCSI_ATTRS
0296 help
0297 The iSCSI Driver provides a host with the ability to access storage
0298 through an IP network. The driver uses the iSCSI protocol to transport
0299 SCSI requests and responses over a TCP/IP network between the host
0300 (the "initiator") and "targets". Architecturally, the iSCSI driver
0301 combines with the host's TCP/IP stack, network drivers, and Network
0302 Interface Card (NIC) to provide the same functions as a SCSI or a
0303 Fibre Channel (FC) adapter driver with a Host Bus Adapter (HBA).
0304
0305 To compile this driver as a module, choose M here: the
0306 module will be called iscsi_tcp.
0307
0308 The userspace component needed to initialize the driver, documentation,
0309 and sample configuration files can be found here:
0310
0311 http://open-iscsi.org
0312
0313 config ISCSI_BOOT_SYSFS
0314 tristate "iSCSI Boot Sysfs Interface"
0315 default n
0316 help
0317 This option enables support for exposing iSCSI boot information
0318 via sysfs to userspace. If you wish to export this information,
0319 say Y. Otherwise, say N.
0320
0321 source "drivers/scsi/cxgbi/Kconfig"
0322 source "drivers/scsi/bnx2i/Kconfig"
0323 source "drivers/scsi/bnx2fc/Kconfig"
0324 source "drivers/scsi/be2iscsi/Kconfig"
0325 source "drivers/scsi/cxlflash/Kconfig"
0326
0327 config SGIWD93_SCSI
0328 tristate "SGI WD93C93 SCSI Driver"
0329 depends on SGI_HAS_WD93 && SCSI
0330 help
0331 If you have a Western Digital WD93 SCSI controller on
0332 an SGI MIPS system, say Y. Otherwise, say N.
0333
0334 config BLK_DEV_3W_XXXX_RAID
0335 tristate "3ware 5/6/7/8xxx ATA-RAID support"
0336 depends on PCI && SCSI
0337 help
0338 3ware is the only hardware ATA-Raid product in Linux to date.
0339 This card is 2,4, or 8 channel master mode support only.
0340 SCSI support required!!!
0341
0342 <http://www.3ware.com/>
0343
0344 Please read the comments at the top of
0345 <file:drivers/scsi/3w-xxxx.c>.
0346
0347 config SCSI_HPSA
0348 tristate "HP Smart Array SCSI driver"
0349 depends on PCI && SCSI
0350 select CHECK_SIGNATURE
0351 select SCSI_SAS_ATTRS
0352 help
0353 This driver supports HP Smart Array Controllers (circa 2009).
0354 It is a SCSI alternative to the cciss driver, which is a block
0355 driver. Anyone wishing to use HP Smart Array controllers who
0356 would prefer the devices be presented to linux as SCSI devices,
0357 rather than as generic block devices should say Y here.
0358
0359 config SCSI_3W_9XXX
0360 tristate "3ware 9xxx SATA-RAID support"
0361 depends on PCI && SCSI
0362 help
0363 This driver supports the 9000 series 3ware SATA-RAID cards.
0364
0365 <http://www.amcc.com>
0366
0367 Please read the comments at the top of
0368 <file:drivers/scsi/3w-9xxx.c>.
0369
0370 config SCSI_3W_SAS
0371 tristate "3ware 97xx SAS/SATA-RAID support"
0372 depends on PCI && SCSI
0373 help
0374 This driver supports the LSI 3ware 9750 6Gb/s SAS/SATA-RAID cards.
0375
0376 <http://www.lsi.com>
0377
0378 Please read the comments at the top of
0379 <file:drivers/scsi/3w-sas.c>.
0380
0381 config SCSI_ACARD
0382 tristate "ACARD SCSI support"
0383 depends on PCI && SCSI
0384 help
0385 This driver supports the ACARD SCSI host adapter.
0386 Support Chip <ATP870 ATP876 ATP880 ATP885>
0387 To compile this driver as a module, choose M here: the
0388 module will be called atp870u.
0389
0390 config SCSI_AHA152X
0391 tristate "Adaptec AHA152X/2825 support"
0392 depends on ISA && SCSI
0393 select SCSI_SPI_ATTRS
0394 select CHECK_SIGNATURE
0395 help
0396 This is a driver for the AHA-1510, AHA-1520, AHA-1522, and AHA-2825
0397 SCSI host adapters. It also works for the AVA-1505, but the IRQ etc.
0398 must be manually specified in this case.
0399
0400 It is explained in section 3.3 of the SCSI-HOWTO, available from
0401 <http://www.tldp.org/docs.html#howto>. You might also want to
0402 read the file <file:Documentation/scsi/aha152x.rst>.
0403
0404 To compile this driver as a module, choose M here: the
0405 module will be called aha152x.
0406
0407 config SCSI_AHA1542
0408 tristate "Adaptec AHA1542 support"
0409 depends on ISA && SCSI && ISA_DMA_API
0410 help
0411 This is support for a SCSI host adapter. It is explained in section
0412 3.4 of the SCSI-HOWTO, available from
0413 <http://www.tldp.org/docs.html#howto>. Note that Trantor was
0414 purchased by Adaptec, and some former Trantor products are being
0415 sold under the Adaptec name. If it doesn't work out of the box, you
0416 may have to change some settings in <file:drivers/scsi/aha1542.h>.
0417
0418 To compile this driver as a module, choose M here: the
0419 module will be called aha1542.
0420
0421 config SCSI_AHA1740
0422 tristate "Adaptec AHA1740 support"
0423 depends on EISA && SCSI
0424 help
0425 This is support for a SCSI host adapter. It is explained in section
0426 3.5 of the SCSI-HOWTO, available from
0427 <http://www.tldp.org/docs.html#howto>. If it doesn't work out
0428 of the box, you may have to change some settings in
0429 <file:drivers/scsi/aha1740.h>.
0430
0431 To compile this driver as a module, choose M here: the
0432 module will be called aha1740.
0433
0434 config SCSI_AACRAID
0435 tristate "Adaptec AACRAID support"
0436 depends on SCSI && PCI
0437 help
0438 This driver supports a variety of Dell, HP, Adaptec, IBM and
0439 ICP storage products. For a list of supported products, refer
0440 to <file:Documentation/scsi/aacraid.rst>.
0441
0442 To compile this driver as a module, choose M here: the module
0443 will be called aacraid.
0444
0445
0446 source "drivers/scsi/aic7xxx/Kconfig.aic7xxx"
0447 source "drivers/scsi/aic7xxx/Kconfig.aic79xx"
0448 source "drivers/scsi/aic94xx/Kconfig"
0449 source "drivers/scsi/hisi_sas/Kconfig"
0450 source "drivers/scsi/mvsas/Kconfig"
0451
0452 config SCSI_MVUMI
0453 tristate "Marvell UMI driver"
0454 depends on SCSI && PCI
0455 help
0456 Module for Marvell Universal Message Interface(UMI) driver
0457
0458 To compile this driver as a module, choose M here: the
0459 module will be called mvumi.
0460
0461 config SCSI_ADVANSYS
0462 tristate "AdvanSys SCSI support"
0463 depends on SCSI
0464 depends on ISA || EISA || PCI
0465 depends on ISA_DMA_API || !ISA
0466 help
0467 This is a driver for all SCSI host adapters manufactured by
0468 AdvanSys. It is documented in the kernel source in
0469 <file:drivers/scsi/advansys.c>.
0470
0471 To compile this driver as a module, choose M here: the
0472 module will be called advansys.
0473
0474 config SCSI_ARCMSR
0475 tristate "ARECA (ARC11xx/12xx/13xx/16xx) SATA/SAS RAID Host Adapter"
0476 depends on PCI && SCSI
0477 help
0478 This driver supports all of ARECA's SATA/SAS RAID controller cards.
0479 This is an ARECA-maintained driver by Erich Chen.
0480 If you have any problems, please mail to: <erich@areca.com.tw>.
0481 Areca supports Linux RAID config tools.
0482 Please link <http://www.areca.com.tw>
0483
0484 To compile this driver as a module, choose M here: the
0485 module will be called arcmsr (modprobe arcmsr).
0486
0487 source "drivers/scsi/esas2r/Kconfig"
0488 source "drivers/scsi/megaraid/Kconfig.megaraid"
0489 source "drivers/scsi/mpt3sas/Kconfig"
0490 source "drivers/scsi/mpi3mr/Kconfig"
0491 source "drivers/scsi/smartpqi/Kconfig"
0492
0493 config SCSI_HPTIOP
0494 tristate "HighPoint RocketRAID 3xxx/4xxx Controller support"
0495 depends on SCSI && PCI
0496 help
0497 This option enables support for HighPoint RocketRAID 3xxx/4xxx
0498 controllers.
0499
0500 To compile this driver as a module, choose M here; the module
0501 will be called hptiop. If unsure, say N.
0502
0503 config SCSI_BUSLOGIC
0504 tristate "BusLogic SCSI support"
0505 depends on PCI && SCSI
0506 help
0507 This is support for BusLogic MultiMaster and FlashPoint SCSI Host
0508 Adapters. Consult the SCSI-HOWTO, available from
0509 <http://www.tldp.org/docs.html#howto>, and the files
0510 <file:Documentation/scsi/BusLogic.rst> and
0511 <file:Documentation/scsi/FlashPoint.rst> for more information.
0512 Note that support for FlashPoint is only available for 32-bit
0513 x86 configurations.
0514
0515 To compile this driver as a module, choose M here: the
0516 module will be called BusLogic.
0517
0518 config SCSI_FLASHPOINT
0519 bool "FlashPoint support"
0520 depends on SCSI_BUSLOGIC && PCI
0521 help
0522 This option allows you to add FlashPoint support to the
0523 BusLogic SCSI driver. The FlashPoint SCCB Manager code is
0524 substantial, so users of MultiMaster Host Adapters may not
0525 wish to include it.
0526
0527 config SCSI_MYRB
0528 tristate "Mylex DAC960/DAC1100 PCI RAID Controller (Block Interface)"
0529 depends on PCI
0530 select RAID_ATTRS
0531 help
0532 This driver adds support for the Mylex DAC960, AcceleRAID, and
0533 eXtremeRAID PCI RAID controllers. This driver supports the
0534 older, block based interface.
0535 This driver is a reimplementation of the original DAC960
0536 driver. If you have used the DAC960 driver you should enable
0537 this module.
0538
0539 To compile this driver as a module, choose M here: the
0540 module will be called myrb.
0541
0542 config SCSI_MYRS
0543 tristate "Mylex DAC960/DAC1100 PCI RAID Controller (SCSI Interface)"
0544 depends on PCI
0545 depends on !CPU_BIG_ENDIAN || COMPILE_TEST
0546 select RAID_ATTRS
0547 help
0548 This driver adds support for the Mylex DAC960, AcceleRAID, and
0549 eXtremeRAID PCI RAID controllers. This driver supports the
0550 newer, SCSI-based interface only.
0551 This driver is a reimplementation of the original DAC960
0552 driver. If you have used the DAC960 driver you should enable
0553 this module.
0554
0555 To compile this driver as a module, choose M here: the
0556 module will be called myrs.
0557
0558 config VMWARE_PVSCSI
0559 tristate "VMware PVSCSI driver support"
0560 depends on PCI && SCSI && X86
0561 help
0562 This driver supports VMware's para virtualized SCSI HBA.
0563 To compile this driver as a module, choose M here: the
0564 module will be called vmw_pvscsi.
0565
0566 config XEN_SCSI_FRONTEND
0567 tristate "XEN SCSI frontend driver"
0568 depends on SCSI && XEN
0569 select XEN_XENBUS_FRONTEND
0570 help
0571 The XEN SCSI frontend driver allows the kernel to access SCSI Devices
0572 within another guest OS (usually Dom0).
0573 Only needed if the kernel is running in a XEN guest and generic
0574 SCSI access to a device is needed.
0575
0576 config HYPERV_STORAGE
0577 tristate "Microsoft Hyper-V virtual storage driver"
0578 depends on SCSI && HYPERV
0579 depends on m || SCSI_FC_ATTRS != m
0580 default HYPERV
0581 help
0582 Select this option to enable the Hyper-V virtual storage driver.
0583
0584 config LIBFC
0585 tristate "LibFC module"
0586 depends on SCSI_FC_ATTRS
0587 select CRC32
0588 help
0589 Fibre Channel library module
0590
0591 config LIBFCOE
0592 tristate "LibFCoE module"
0593 depends on LIBFC
0594 help
0595 Library for Fibre Channel over Ethernet module
0596
0597 config FCOE
0598 tristate "FCoE module"
0599 depends on PCI
0600 depends on LIBFCOE
0601 help
0602 Fibre Channel over Ethernet module
0603
0604 config FCOE_FNIC
0605 tristate "Cisco FNIC Driver"
0606 depends on PCI && X86
0607 depends on LIBFCOE
0608 help
0609 This is support for the Cisco PCI-Express FCoE HBA.
0610
0611 To compile this driver as a module, choose M here and read
0612 <file:Documentation/scsi/scsi.rst>.
0613 The module will be called fnic.
0614
0615 config SCSI_SNIC
0616 tristate "Cisco SNIC Driver"
0617 depends on PCI && SCSI
0618 help
0619 This is support for the Cisco PCI-Express SCSI HBA.
0620
0621 To compile this driver as a module, choose M here and read
0622 <file:Documentation/scsi/scsi.rst>.
0623 The module will be called snic.
0624
0625 config SCSI_SNIC_DEBUG_FS
0626 bool "Cisco SNIC Driver Debugfs Support"
0627 depends on SCSI_SNIC && DEBUG_FS
0628 help
0629 This enables to list debugging information from SNIC Driver
0630 available via debugfs file system
0631
0632 config SCSI_DMX3191D
0633 tristate "DMX3191D SCSI support"
0634 depends on PCI && SCSI
0635 select SCSI_SPI_ATTRS
0636 help
0637 This is support for Domex DMX3191D SCSI Host Adapters.
0638
0639 To compile this driver as a module, choose M here: the
0640 module will be called dmx3191d.
0641
0642 config SCSI_FDOMAIN
0643 tristate
0644 depends on SCSI
0645
0646 config SCSI_FDOMAIN_PCI
0647 tristate "Future Domain TMC-3260/AHA-2920A PCI SCSI support"
0648 depends on PCI && SCSI
0649 select SCSI_FDOMAIN
0650 help
0651 This is support for Future Domain's PCI SCSI host adapters (TMC-3260)
0652 and other adapters with PCI bus based on the Future Domain chipsets
0653 (Adaptec AHA-2920A).
0654
0655 NOTE: Newer Adaptec AHA-2920C boards use the Adaptec AIC-7850 chip
0656 and should use the aic7xxx driver ("Adaptec AIC7xxx chipset SCSI
0657 controller support"). This Future Domain driver works with the older
0658 Adaptec AHA-2920A boards with a Future Domain chip on them.
0659
0660 To compile this driver as a module, choose M here: the
0661 module will be called fdomain_pci.
0662
0663 config SCSI_FDOMAIN_ISA
0664 tristate "Future Domain 16xx ISA SCSI support"
0665 depends on ISA && SCSI
0666 select CHECK_SIGNATURE
0667 select SCSI_FDOMAIN
0668 help
0669 This is support for Future Domain's 16-bit SCSI host adapters
0670 (TMC-1660/1680, TMC-1650/1670, TMC-1610M/MER/MEX) and other adapters
0671 with ISA bus based on the Future Domain chipsets (Quantum ISA-200S,
0672 ISA-250MG; and at least one IBM board).
0673
0674 To compile this driver as a module, choose M here: the
0675 module will be called fdomain_isa.
0676
0677 config SCSI_ISCI
0678 tristate "Intel(R) C600 Series Chipset SAS Controller"
0679 depends on PCI && SCSI
0680 depends on X86
0681 select SCSI_SAS_LIBSAS
0682 help
0683 This driver supports the 6Gb/s SAS capabilities of the storage
0684 control unit found in the Intel(R) C600 series chipset.
0685
0686 config SCSI_GENERIC_NCR5380
0687 tristate "Generic NCR5380/53c400 SCSI ISA card support"
0688 depends on ISA && SCSI && HAS_IOPORT_MAP
0689 select SCSI_SPI_ATTRS
0690 help
0691 This is a driver for old ISA card SCSI controllers based on a
0692 NCR 5380, 53C80, 53C400, 53C400A, or DTC 436 device.
0693 Most boards such as the Trantor T130 fit this category, as do
0694 various 8-bit and 16-bit ISA cards bundled with SCSI scanners.
0695
0696 To compile this driver as a module, choose M here: the
0697 module will be called g_NCR5380.
0698
0699 config SCSI_IPS
0700 tristate "IBM ServeRAID support"
0701 depends on PCI && SCSI
0702 help
0703 This is support for the IBM ServeRAID hardware RAID controllers.
0704 See <http://www.developer.ibm.com/welcome/netfinity/serveraid.html>
0705 and <http://www-947.ibm.com/support/entry/portal/docdisplay?brand=5000008&lndocid=SERV-RAID>
0706 for more information. If this driver does not work correctly
0707 without modification please contact the author by email at
0708 <ipslinux@adaptec.com>.
0709
0710 To compile this driver as a module, choose M here: the
0711 module will be called ips.
0712
0713 config SCSI_IBMVSCSI
0714 tristate "IBM Virtual SCSI support"
0715 depends on PPC_PSERIES
0716 select SCSI_SRP_ATTRS
0717 help
0718 This is the IBM POWER Virtual SCSI Client
0719
0720 To compile this driver as a module, choose M here: the
0721 module will be called ibmvscsi.
0722
0723 config SCSI_IBMVSCSIS
0724 tristate "IBM Virtual SCSI Server support"
0725 depends on PPC_PSERIES && TARGET_CORE && SCSI && PCI
0726 help
0727 This is the IBM POWER Virtual SCSI Target Server
0728 This driver uses the SRP protocol for communication between servers
0729 guest and/or the host that run on the same server.
0730 More information on VSCSI protocol can be found at www.power.org
0731
0732 The userspace configuration needed to initialize the driver can be
0733 be found here:
0734
0735 https://github.com/powervm/ibmvscsis/wiki/Configuration
0736
0737 To compile this driver as a module, choose M here: the
0738 module will be called ibmvscsis.
0739
0740 config SCSI_IBMVFC
0741 tristate "IBM Virtual FC support"
0742 depends on PPC_PSERIES && SCSI
0743 depends on SCSI_FC_ATTRS
0744 help
0745 This is the IBM POWER Virtual FC Client
0746
0747 To compile this driver as a module, choose M here: the
0748 module will be called ibmvfc.
0749
0750 config SCSI_IBMVFC_TRACE
0751 bool "enable driver internal trace"
0752 depends on SCSI_IBMVFC
0753 default y
0754 help
0755 If you say Y here, the driver will trace all commands issued
0756 to the adapter. Performance impact is minimal. Trace can be
0757 dumped using /sys/class/scsi_host/hostXX/trace.
0758
0759 config SCSI_INITIO
0760 tristate "Initio 9100U(W) support"
0761 depends on PCI && SCSI
0762 help
0763 This is support for the Initio 91XXU(W) SCSI host adapter. Please
0764 read the SCSI-HOWTO, available from
0765 <http://www.tldp.org/docs.html#howto>.
0766
0767 To compile this driver as a module, choose M here: the
0768 module will be called initio.
0769
0770 config SCSI_INIA100
0771 tristate "Initio INI-A100U2W support"
0772 depends on PCI && SCSI
0773 help
0774 This is support for the Initio INI-A100U2W SCSI host adapter.
0775 Please read the SCSI-HOWTO, available from
0776 <http://www.tldp.org/docs.html#howto>.
0777
0778 To compile this driver as a module, choose M here: the
0779 module will be called a100u2w.
0780
0781 config SCSI_PPA
0782 tristate "IOMEGA parallel port (ppa - older drives)"
0783 depends on SCSI && PARPORT_PC
0784 help
0785 This driver supports older versions of IOMEGA's parallel port ZIP
0786 drive (a 100 MB removable media device).
0787
0788 Note that you can say N here if you have the SCSI version of the ZIP
0789 drive: it will be supported automatically if you said Y to the
0790 generic "SCSI disk support", above.
0791
0792 If you have the ZIP Plus drive or a more recent parallel port ZIP
0793 drive (if the supplied cable with the drive is labeled "AutoDetect")
0794 then you should say N here and Y to "IOMEGA parallel port (imm -
0795 newer drives)", below.
0796
0797 For more information about this driver and how to use it you should
0798 read the file <file:Documentation/scsi/ppa.rst>. You should also read
0799 the SCSI-HOWTO, which is available from
0800 <http://www.tldp.org/docs.html#howto>. If you use this driver,
0801 you will still be able to use the parallel port for other tasks,
0802 such as a printer; it is safe to compile both drivers into the
0803 kernel.
0804
0805 To compile this driver as a module, choose M here: the
0806 module will be called ppa.
0807
0808 config SCSI_IMM
0809 tristate "IOMEGA parallel port (imm - newer drives)"
0810 depends on SCSI && PARPORT_PC
0811 help
0812 This driver supports newer versions of IOMEGA's parallel port ZIP
0813 drive (a 100 MB removable media device).
0814
0815 Note that you can say N here if you have the SCSI version of the ZIP
0816 drive: it will be supported automatically if you said Y to the
0817 generic "SCSI disk support", above.
0818
0819 If you have the ZIP Plus drive or a more recent parallel port ZIP
0820 drive (if the supplied cable with the drive is labeled "AutoDetect")
0821 then you should say Y here; if you have an older ZIP drive, say N
0822 here and Y to "IOMEGA Parallel Port (ppa - older drives)", above.
0823
0824 For more information about this driver and how to use it you should
0825 read the file <file:Documentation/scsi/ppa.rst>. You should also read
0826 the SCSI-HOWTO, which is available from
0827 <http://www.tldp.org/docs.html#howto>. If you use this driver,
0828 you will still be able to use the parallel port for other tasks,
0829 such as a printer; it is safe to compile both drivers into the
0830 kernel.
0831
0832 To compile this driver as a module, choose M here: the
0833 module will be called imm.
0834
0835 config SCSI_IZIP_EPP16
0836 bool "ppa/imm option - Use slow (but safe) EPP-16"
0837 depends on SCSI_PPA || SCSI_IMM
0838 help
0839 EPP (Enhanced Parallel Port) is a standard for parallel ports which
0840 allows them to act as expansion buses that can handle up to 64
0841 peripheral devices.
0842
0843 Some parallel port chipsets are slower than their motherboard, and
0844 so we have to control the state of the chipset's FIFO queue every
0845 now and then to avoid data loss. This will be done if you say Y
0846 here.
0847
0848 Generally, saying Y is the safe option and slows things down a bit.
0849
0850 config SCSI_IZIP_SLOW_CTR
0851 bool "ppa/imm option - Assume slow parport control register"
0852 depends on SCSI_PPA || SCSI_IMM
0853 help
0854 Some parallel ports are known to have excessive delays between
0855 changing the parallel port control register and good data being
0856 available on the parallel port data/status register. This option
0857 forces a small delay (1.0 usec to be exact) after changing the
0858 control register to let things settle out. Enabling this option may
0859 result in a big drop in performance but some very old parallel ports
0860 (found in 386 vintage machines) will not work properly.
0861
0862 Generally, saying N is fine.
0863
0864 config SCSI_LASI700
0865 tristate "HP Lasi SCSI support for 53c700/710"
0866 depends on GSC && SCSI
0867 select SCSI_SPI_ATTRS
0868 help
0869 This is a driver for the SCSI controller in the Lasi chip found in
0870 many PA-RISC workstations & servers. If you do not know whether you
0871 have a Lasi chip, it is safe to say "Y" here.
0872
0873 config SCSI_SNI_53C710
0874 tristate "SNI RM SCSI support for 53c710"
0875 depends on SNI_RM && SCSI
0876 select SCSI_SPI_ATTRS
0877 select 53C700_LE_ON_BE
0878 help
0879 This is a driver for the onboard SCSI controller found in older
0880 SNI RM workstations & servers.
0881
0882 config 53C700_LE_ON_BE
0883 bool
0884 depends on SCSI_LASI700 || SCSI_SNI_53C710
0885 default y
0886
0887 config SCSI_STEX
0888 tristate "Promise SuperTrak EX Series support"
0889 depends on PCI && SCSI
0890 help
0891 This driver supports Promise SuperTrak EX series storage controllers.
0892
0893 Promise provides Linux RAID configuration utility for these
0894 controllers. Please visit <http://www.promise.com> to download.
0895
0896 To compile this driver as a module, choose M here: the
0897 module will be called stex.
0898
0899 config 53C700_BE_BUS
0900 bool
0901 depends on SCSI_A4000T || SCSI_ZORRO7XX || MVME16x_SCSI || BVME6000_SCSI
0902 default y
0903
0904 config SCSI_SYM53C8XX_2
0905 tristate "SYM53C8XX Version 2 SCSI support"
0906 depends on PCI && SCSI
0907 select SCSI_SPI_ATTRS
0908 help
0909 This driver supports the whole NCR53C8XX/SYM53C8XX family of
0910 PCI-SCSI controllers. It also supports the subset of LSI53C10XX
0911 Ultra-160 controllers that are based on the SYM53C8XX SCRIPTS
0912 language. It does not support LSI53C10XX Ultra-320 PCI-X SCSI
0913 controllers; you need to use the Fusion MPT driver for that.
0914
0915 Please read <file:Documentation/scsi/sym53c8xx_2.rst> for more
0916 information.
0917
0918 config SCSI_SYM53C8XX_DMA_ADDRESSING_MODE
0919 int "DMA addressing mode"
0920 depends on SCSI_SYM53C8XX_2
0921 default "1"
0922 help
0923 This option only applies to PCI-SCSI chips that are PCI DAC
0924 capable (875A, 895A, 896, 1010-33, 1010-66, 1000).
0925
0926 When set to 0, the driver will program the chip to only perform
0927 32-bit DMA. When set to 1, the chip will be able to perform DMA
0928 to addresses up to 1TB. When set to 2, the driver supports the
0929 full 64-bit DMA address range, but can only address 16 segments
0930 of 4 GB each. This limits the total addressable range to 64 GB.
0931
0932 Most machines with less than 4GB of memory should use a setting
0933 of 0 for best performance. If your machine has 4GB of memory
0934 or more, you should set this option to 1 (the default).
0935
0936 The still experimental value 2 (64 bit DMA addressing with 16
0937 x 4GB segments limitation) can be used on systems that require
0938 PCI address bits past bit 39 to be set for the addressing of
0939 memory using PCI DAC cycles.
0940
0941 config SCSI_SYM53C8XX_DEFAULT_TAGS
0942 int "Default tagged command queue depth"
0943 depends on SCSI_SYM53C8XX_2
0944 default "16"
0945 help
0946 This is the default value of the command queue depth the
0947 driver will announce to the generic SCSI layer for devices
0948 that support tagged command queueing. This value can be changed
0949 from the boot command line. This is a soft limit that cannot
0950 exceed CONFIG_SCSI_SYM53C8XX_MAX_TAGS.
0951
0952 config SCSI_SYM53C8XX_MAX_TAGS
0953 int "Maximum number of queued commands"
0954 depends on SCSI_SYM53C8XX_2
0955 default "64"
0956 help
0957 This option allows you to specify the maximum number of commands
0958 that can be queued to any device, when tagged command queuing is
0959 possible. The driver supports up to 256 queued commands per device.
0960 This value is used as a compiled-in hard limit.
0961
0962 config SCSI_SYM53C8XX_MMIO
0963 bool "Use memory mapped IO"
0964 depends on SCSI_SYM53C8XX_2
0965 default y
0966 help
0967 Memory mapped IO is faster than Port IO. Most people should
0968 answer Y here, but some machines may have problems. If you have
0969 to answer N here, please report the problem to the maintainer.
0970
0971 config SCSI_IPR
0972 tristate "IBM Power Linux RAID adapter support"
0973 depends on PCI && SCSI && ATA
0974 select SATA_HOST
0975 select FW_LOADER
0976 select IRQ_POLL
0977 select SGL_ALLOC
0978 help
0979 This driver supports the IBM Power Linux family RAID adapters.
0980 This includes IBM pSeries 5712, 5703, 5709, and 570A, as well
0981 as IBM iSeries 5702, 5703, 5709, and 570A.
0982
0983 config SCSI_IPR_TRACE
0984 bool "enable driver internal trace"
0985 depends on SCSI_IPR
0986 default y
0987 help
0988 If you say Y here, the driver will trace all commands issued
0989 to the adapter. Performance impact is minimal. Trace can be
0990 dumped using /sys/bus/class/scsi_host/hostXX/trace.
0991
0992 config SCSI_IPR_DUMP
0993 bool "enable adapter dump support"
0994 depends on SCSI_IPR
0995 default y
0996 help
0997 If you say Y here, the driver will support adapter crash dump.
0998 If you enable this support, the iprdump daemon can be used
0999 to capture adapter failure analysis information.
1000
1001 config SCSI_ZALON
1002 tristate "Zalon SCSI support"
1003 depends on GSC && SCSI
1004 select SCSI_SPI_ATTRS
1005 help
1006 The Zalon is a GSC/HSC bus interface chip that sits between the
1007 PA-RISC processor and the NCR 53c720 SCSI controller on C100,
1008 C110, J200, J210 and some D, K & R-class machines. It's also
1009 used on the add-in Bluefish, Barracuda & Shrike SCSI cards.
1010 Say Y here if you have one of these machines or cards.
1011
1012 config SCSI_NCR53C8XX_DEFAULT_TAGS
1013 int "default tagged command queue depth"
1014 depends on SCSI_ZALON
1015 default "8"
1016 help
1017 "Tagged command queuing" is a feature of SCSI-2 which improves
1018 performance: the host adapter can send several SCSI commands to a
1019 device's queue even if previous commands haven't finished yet.
1020 Because the device is intelligent, it can optimize its operations
1021 (like head positioning) based on its own request queue. Some SCSI
1022 devices don't implement this properly; if you want to disable this
1023 feature, enter 0 or 1 here (it doesn't matter which).
1024
1025 The default value is 8 and should be supported by most hard disks.
1026 This value can be overridden from the boot command line using the
1027 'tags' option as follows (example):
1028 'ncr53c8xx=tags:4/t2t3q16/t0u2q10' will set default queue depth to
1029 4, set queue depth to 16 for target 2 and target 3 on controller 0
1030 and set queue depth to 10 for target 0 / lun 2 on controller 1.
1031
1032 The normal answer therefore is to go with the default 8 and to use
1033 a boot command line option for devices that need to use a different
1034 command queue depth.
1035
1036 There is no safe option other than using good SCSI devices.
1037
1038 config SCSI_NCR53C8XX_MAX_TAGS
1039 int "maximum number of queued commands"
1040 depends on SCSI_ZALON
1041 default "32"
1042 help
1043 This option allows you to specify the maximum number of commands
1044 that can be queued to any device, when tagged command queuing is
1045 possible. The default value is 32. Minimum is 2, maximum is 64.
1046 Modern hard disks are able to support 64 tags and even more, but
1047 do not seem to be faster when more than 32 tags are being used.
1048
1049 So, the normal answer here is to go with the default value 32 unless
1050 you are using very large hard disks with large cache (>= 1 MB) that
1051 are able to take advantage of more than 32 tagged commands.
1052
1053 There is no safe option and the default answer is recommended.
1054
1055 config SCSI_NCR53C8XX_SYNC
1056 int "synchronous transfers frequency in MHz"
1057 depends on SCSI_ZALON
1058 default "20"
1059 help
1060 The SCSI Parallel Interface-2 Standard defines 5 classes of transfer
1061 rates: FAST-5, FAST-10, FAST-20, FAST-40 and FAST-80. The numbers
1062 are respectively the maximum data transfer rates in mega-transfers
1063 per second for each class. For example, a FAST-20 Wide 16 device is
1064 able to transfer data at 20 million 16 bit packets per second for a
1065 total rate of 40 MB/s.
1066
1067 You may specify 0 if you want to only use asynchronous data
1068 transfers. This is the safest and slowest option. Otherwise, specify
1069 a value between 5 and 80, depending on the capability of your SCSI
1070 controller. The higher the number, the faster the data transfer.
1071 Note that 80 should normally be ok since the driver decreases the
1072 value automatically according to the controller's capabilities.
1073
1074 Your answer to this question is ignored for controllers with NVRAM,
1075 since the driver will get this information from the user set-up. It
1076 also can be overridden using a boot setup option, as follows
1077 (example): 'ncr53c8xx=sync:12' will allow the driver to negotiate
1078 for FAST-20 synchronous data transfer (20 mega-transfers per
1079 second).
1080
1081 The normal answer therefore is not to go with the default but to
1082 select the maximum value 80 allowing the driver to use the maximum
1083 value supported by each controller. If this causes problems with
1084 your SCSI devices, you should come back and decrease the value.
1085
1086 There is no safe option other than using good cabling, right
1087 terminations and SCSI conformant devices.
1088
1089 config SCSI_NCR53C8XX_NO_DISCONNECT
1090 bool "not allow targets to disconnect"
1091 depends on SCSI_ZALON && SCSI_NCR53C8XX_DEFAULT_TAGS=0
1092 help
1093 This option is only provided for safety if you suspect some SCSI
1094 device of yours to not support properly the target-disconnect
1095 feature. In that case, you would say Y here. In general however, to
1096 not allow targets to disconnect is not reasonable if there is more
1097 than 1 device on a SCSI bus. The normal answer therefore is N.
1098
1099 config SCSI_QLOGIC_FAS
1100 tristate "Qlogic FAS SCSI support"
1101 depends on ISA && SCSI
1102 help
1103 This is a driver for the ISA, VLB, and PCMCIA versions of the Qlogic
1104 FastSCSI! cards as well as any other card based on the FASXX chip
1105 (including the Control Concepts SCSI/IDE/SIO/PIO/FDC cards).
1106
1107 This driver does NOT support the PCI versions of these cards. The
1108 PCI versions are supported by the Qlogic ISP driver ("Qlogic ISP
1109 SCSI support"), below.
1110
1111 Information about this driver is contained in
1112 <file:Documentation/scsi/qlogicfas.rst>. You should also read the
1113 SCSI-HOWTO, available from
1114 <http://www.tldp.org/docs.html#howto>.
1115
1116 To compile this driver as a module, choose M here: the
1117 module will be called qlogicfas.
1118
1119 config SCSI_QLOGIC_1280
1120 tristate "Qlogic QLA 1240/1x80/1x160 SCSI support"
1121 depends on PCI && SCSI
1122 help
1123 Say Y if you have a QLogic ISP1240/1x80/1x160 SCSI host adapter.
1124
1125 To compile this driver as a module, choose M here: the
1126 module will be called qla1280.
1127
1128 config SCSI_QLOGICPTI
1129 tristate "PTI Qlogic, ISP Driver"
1130 depends on SBUS && SCSI
1131 help
1132 This driver supports SBUS SCSI controllers from PTI or QLogic. These
1133 controllers are known under Solaris as qpti and in the openprom as
1134 PTI,ptisp or QLGC,isp. Note that PCI QLogic SCSI controllers are
1135 driven by a different driver.
1136
1137 To compile this driver as a module, choose M here: the
1138 module will be called qlogicpti.
1139
1140 source "drivers/scsi/qla2xxx/Kconfig"
1141 source "drivers/scsi/qla4xxx/Kconfig"
1142 source "drivers/scsi/qedi/Kconfig"
1143 source "drivers/scsi/qedf/Kconfig"
1144
1145 config SCSI_LPFC
1146 tristate "Emulex LightPulse Fibre Channel Support"
1147 depends on PCI && SCSI
1148 depends on CPU_FREQ
1149 depends on SCSI_FC_ATTRS
1150 depends on NVME_TARGET_FC || NVME_TARGET_FC=n
1151 depends on NVME_FC || NVME_FC=n
1152 select CRC_T10DIF
1153 select IRQ_POLL
1154 help
1155 This lpfc driver supports the Emulex LightPulse
1156 Family of Fibre Channel PCI host adapters.
1157
1158 config SCSI_LPFC_DEBUG_FS
1159 bool "Emulex LightPulse Fibre Channel debugfs Support"
1160 depends on SCSI_LPFC && DEBUG_FS
1161 help
1162 This makes debugging information from the lpfc driver
1163 available via the debugfs filesystem.
1164
1165 source "drivers/scsi/elx/Kconfig"
1166
1167 config SCSI_SIM710
1168 tristate "Simple 53c710 SCSI support (Compaq, NCR machines)"
1169 depends on EISA && SCSI
1170 select SCSI_SPI_ATTRS
1171 help
1172 This driver is for NCR53c710 based SCSI host adapters.
1173
1174 It currently supports Compaq EISA cards.
1175
1176 config SCSI_DC395x
1177 tristate "Tekram DC395(U/UW/F) and DC315(U) SCSI support"
1178 depends on PCI && SCSI
1179 select SCSI_SPI_ATTRS
1180 help
1181 This driver supports PCI SCSI host adapters based on the ASIC
1182 TRM-S1040 chip, e.g Tekram DC395(U/UW/F) and DC315(U) variants.
1183
1184 This driver works, but is still in experimental status. So better
1185 have a bootable disk and a backup in case of emergency.
1186
1187 Documentation can be found in <file:Documentation/scsi/dc395x.rst>.
1188
1189 To compile this driver as a module, choose M here: the
1190 module will be called dc395x.
1191
1192 config SCSI_AM53C974
1193 tristate "Tekram DC390(T) and Am53/79C974 SCSI support (new driver)"
1194 depends on PCI && SCSI
1195 select SCSI_SPI_ATTRS
1196 help
1197 This driver supports PCI SCSI host adapters based on the Am53C974A
1198 chip, e.g. Tekram DC390(T), DawiControl 2974 and some onboard
1199 PCscsi/PCnet (Am53/79C974) solutions.
1200 This is a new implementation base on the generic esp_scsi driver.
1201
1202 Note that this driver does NOT support Tekram DC390W/U/F, which are
1203 based on NCR/Symbios chips. Use "NCR53C8XX SCSI support" for those.
1204
1205 To compile this driver as a module, choose M here: the
1206 module will be called am53c974.
1207
1208 config SCSI_NSP32
1209 tristate "Workbit NinjaSCSI-32Bi/UDE support"
1210 depends on PCI && SCSI && !64BIT
1211 help
1212 This is support for the Workbit NinjaSCSI-32Bi/UDE PCI/Cardbus
1213 SCSI host adapter. Please read the SCSI-HOWTO, available from
1214 <http://www.tldp.org/docs.html#howto>.
1215
1216 To compile this driver as a module, choose M here: the
1217 module will be called nsp32.
1218
1219 config SCSI_WD719X
1220 tristate "Western Digital WD7193/7197/7296 support"
1221 depends on PCI && SCSI
1222 select EEPROM_93CX6
1223 help
1224 This is a driver for Western Digital WD7193, WD7197 and WD7296 PCI
1225 SCSI controllers (based on WD33C296A chip).
1226
1227 config SCSI_DEBUG
1228 tristate "SCSI debugging host and device simulator"
1229 depends on SCSI
1230 select CRC_T10DIF
1231 help
1232 This pseudo driver simulates one or more hosts (SCSI initiators),
1233 each with one or more targets, each with one or more logical units.
1234 Defaults to one of each, creating a small RAM disk device. Many
1235 parameters found in the /sys/bus/pseudo/drivers/scsi_debug
1236 directory can be tweaked at run time.
1237 See <http://sg.danny.cz/sg/sdebug26.html> for more information.
1238 Mainly used for testing and best as a module. If unsure, say N.
1239
1240 config SCSI_MESH
1241 tristate "MESH (Power Mac internal SCSI) support"
1242 depends on PPC32 && PPC_PMAC && SCSI
1243 help
1244 Many Power Macintoshes and clones have a MESH (Macintosh Enhanced
1245 SCSI Hardware) SCSI bus adaptor (the 7200 doesn't, but all of the
1246 other Power Macintoshes do). Say Y to include support for this SCSI
1247 adaptor.
1248
1249 To compile this driver as a module, choose M here: the
1250 module will be called mesh.
1251
1252 config SCSI_MESH_SYNC_RATE
1253 int "maximum synchronous transfer rate (MB/s) (0 = async)"
1254 depends on SCSI_MESH
1255 default "5"
1256 help
1257 On Power Macintoshes (and clones) where the MESH SCSI bus adaptor
1258 drives a bus which is entirely internal to the machine (such as the
1259 7500, 7600, 8500, etc.), the MESH is capable of synchronous
1260 operation at up to 10 MB/s. On machines where the SCSI bus
1261 controlled by the MESH can have external devices connected, it is
1262 usually rated at 5 MB/s. 5 is a safe value here unless you know the
1263 MESH SCSI bus is internal only; in that case you can say 10. Say 0
1264 to disable synchronous operation.
1265
1266 config SCSI_MESH_RESET_DELAY_MS
1267 int "initial bus reset delay (ms) (0 = no reset)"
1268 depends on SCSI_MESH
1269 default "4000"
1270
1271 config SCSI_MAC53C94
1272 tristate "53C94 (Power Mac external SCSI) support"
1273 depends on PPC32 && PPC_PMAC && SCSI
1274 help
1275 On Power Macintoshes (and clones) with two SCSI buses, the external
1276 SCSI bus is usually controlled by a 53C94 SCSI bus adaptor. Older
1277 machines which only have one SCSI bus, such as the 7200, also use
1278 the 53C94. Say Y to include support for the 53C94.
1279
1280 To compile this driver as a module, choose M here: the
1281 module will be called mac53c94.
1282
1283 source "drivers/scsi/arm/Kconfig"
1284
1285 config JAZZ_ESP
1286 bool "MIPS JAZZ FAS216 SCSI support"
1287 depends on MACH_JAZZ && SCSI
1288 select SCSI_SPI_ATTRS
1289 help
1290 This is the driver for the onboard SCSI host adapter of MIPS Magnum
1291 4000, Acer PICA, Olivetti M700-10 and a few other identical OEM
1292 systems.
1293
1294 config A3000_SCSI
1295 tristate "A3000 WD33C93A support"
1296 depends on AMIGA && SCSI
1297 help
1298 If you have an Amiga 3000 and have SCSI devices connected to the
1299 built-in SCSI controller, say Y. Otherwise, say N.
1300
1301 To compile this driver as a module, choose M here: the
1302 module will be called a3000.
1303
1304 config A2091_SCSI
1305 tristate "A2091/A590 WD33C93A support"
1306 depends on ZORRO && SCSI
1307 help
1308 If you have a Commodore A2091 SCSI controller, say Y. Otherwise,
1309 say N.
1310
1311 To compile this driver as a module, choose M here: the
1312 module will be called a2091.
1313
1314 config GVP11_SCSI
1315 tristate "GVP Series II WD33C93A support"
1316 depends on ZORRO && SCSI
1317 help
1318 If you have a Great Valley Products Series II SCSI controller,
1319 answer Y. Also say Y if you have a later model of GVP SCSI
1320 controller (such as the GVP A4008 or a Combo board). Otherwise,
1321 answer N. This driver does NOT work for the T-Rex series of
1322 accelerators from TekMagic and GVP-M.
1323
1324 To compile this driver as a module, choose M here: the
1325 module will be called gvp11.
1326
1327 config SCSI_A4000T
1328 tristate "A4000T NCR53c710 SCSI support"
1329 depends on AMIGA && SCSI
1330 select SCSI_SPI_ATTRS
1331 help
1332 If you have an Amiga 4000T and have SCSI devices connected to the
1333 built-in SCSI controller, say Y. Otherwise, say N.
1334
1335 To compile this driver as a module, choose M here: the
1336 module will be called a4000t.
1337
1338 config SCSI_ZORRO7XX
1339 tristate "Zorro NCR53c710 SCSI support"
1340 depends on ZORRO && SCSI
1341 select SCSI_SPI_ATTRS
1342 help
1343 Support for various NCR53c710-based SCSI controllers on Zorro
1344 expansion boards for the Amiga.
1345 This includes:
1346 - the Amiga 4091 Zorro III SCSI-2 controller,
1347 - the MacroSystem Development's WarpEngine Amiga SCSI-2 controller
1348 (info at
1349 <http://www.lysator.liu.se/amiga/ar/guide/ar310.guide?FEATURE5>),
1350 - the SCSI controller on the Phase5 Blizzard PowerUP 603e+
1351 accelerator card for the Amiga 1200,
1352 - the SCSI controller on the GVP Turbo 040/060 accelerator.
1353
1354 config SCSI_ZORRO_ESP
1355 tristate "Zorro ESP SCSI support"
1356 depends on ZORRO && SCSI
1357 select SCSI_SPI_ATTRS
1358 select SCSI_ESP_PIO
1359 help
1360 Support for various NCR53C9x (ESP) based SCSI controllers on Zorro
1361 expansion boards for the Amiga.
1362 This includes:
1363 - the Phase5 Blizzard 1230 II and IV SCSI controllers,
1364 - the Phase5 Blizzard 2060 SCSI controller,
1365 - the Phase5 Blizzard Cyberstorm and Cyberstorm II SCSI
1366 controllers,
1367 - the Fastlane Zorro III SCSI controller.
1368
1369 config ATARI_SCSI
1370 tristate "Atari native SCSI support"
1371 depends on ATARI && SCSI
1372 select SCSI_SPI_ATTRS
1373 help
1374 If you have an Atari with built-in NCR5380 SCSI controller (TT,
1375 Falcon, ...) say Y to get it supported. Of course also, if you have
1376 a compatible SCSI controller (e.g. for Medusa).
1377
1378 To compile this driver as a module, choose M here: the module will
1379 be called atari_scsi. If you also enable NVRAM support, the SCSI
1380 host's ID is taken from the setting in TT RTC NVRAM.
1381
1382 This driver supports both styles of NCR integration into the
1383 system: the TT style (separate DMA), and the Falcon style (via
1384 ST-DMA, replacing ACSI). It does NOT support other schemes, like
1385 in the Hades (without DMA).
1386
1387 config MAC_SCSI
1388 tristate "Macintosh NCR5380 SCSI"
1389 depends on MAC && SCSI
1390 select SCSI_SPI_ATTRS
1391 help
1392 This is the NCR 5380 SCSI controller included on most of the 68030
1393 based Macintoshes. If you have one of these say Y and read the
1394 SCSI-HOWTO, available from
1395 <http://www.tldp.org/docs.html#howto>.
1396
1397 config SCSI_MAC_ESP
1398 tristate "Macintosh NCR53c9[46] SCSI"
1399 depends on MAC && SCSI
1400 select SCSI_SPI_ATTRS
1401 select SCSI_ESP_PIO
1402 help
1403 This is the NCR 53c9x SCSI controller found on most of the 68040
1404 based Macintoshes.
1405
1406 To compile this driver as a module, choose M here: the module
1407 will be called mac_esp.
1408
1409 config MVME147_SCSI
1410 bool "WD33C93 SCSI driver for MVME147"
1411 depends on MVME147 && SCSI=y
1412 select SCSI_SPI_ATTRS
1413 help
1414 Support for the on-board SCSI controller on the Motorola MVME147
1415 single-board computer.
1416
1417 config MVME16x_SCSI
1418 tristate "NCR53C710 SCSI driver for MVME16x"
1419 depends on MVME16x && SCSI
1420 select SCSI_SPI_ATTRS
1421 help
1422 The Motorola MVME162, 166, 167, 172 and 177 boards use the NCR53C710
1423 SCSI controller chip. Almost everyone using one of these boards
1424 will want to say Y to this question.
1425
1426 config BVME6000_SCSI
1427 tristate "NCR53C710 SCSI driver for BVME6000"
1428 depends on BVME6000 && SCSI
1429 select SCSI_SPI_ATTRS
1430 help
1431 The BVME4000 and BVME6000 boards from BVM Ltd use the NCR53C710
1432 SCSI controller chip. Almost everyone using one of these boards
1433 will want to say Y to this question.
1434
1435 config SUN3_SCSI
1436 tristate "Sun3 NCR5380 SCSI"
1437 depends on SUN3 && SCSI
1438 select SCSI_SPI_ATTRS
1439 help
1440 This option will enable support for the OBIO (onboard io) NCR5380
1441 SCSI controller found in the Sun 3/50 and 3/60, as well as for
1442 "Sun3" type VME scsi controllers also based on the NCR5380.
1443 General Linux information on the Sun 3 series (now discontinued)
1444 is at <http://www.angelfire.com/ca2/tech68k/sun3.html>.
1445
1446 config SUN3X_ESP
1447 bool "Sun3x ESP SCSI"
1448 depends on SUN3X && SCSI=y
1449 select SCSI_SPI_ATTRS
1450 help
1451 The ESP was an on-board SCSI controller used on Sun 3/80
1452 machines. Say Y here to compile in support for it.
1453
1454 config SCSI_SUNESP
1455 tristate "Sparc ESP Scsi Driver"
1456 depends on SBUS && SCSI
1457 select SCSI_SPI_ATTRS
1458 help
1459 This is the driver for the Sun ESP SCSI host adapter. The ESP
1460 chipset is present in most SPARC SBUS-based computers and
1461 supports the Emulex family of ESP SCSI chips (esp100, esp100A,
1462 esp236, fas101, fas236) as well as the Qlogic fas366 SCSI chip.
1463
1464 To compile this driver as a module, choose M here: the
1465 module will be called sun_esp.
1466
1467 config ZFCP
1468 tristate "FCP host bus adapter driver for IBM mainframes"
1469 depends on S390 && QDIO && SCSI
1470 depends on SCSI_FC_ATTRS
1471 help
1472 If you want to access SCSI devices attached to your IBM mainframe by
1473 means of Fibre Channel Protocol host bus adapters say Y.
1474
1475 Supported HBAs include different models of the FICON Express and FCP
1476 Express I/O cards.
1477
1478 For a more complete list, and for more details about setup and
1479 operation refer to the IBM publication "Device Drivers, Features, and
1480 Commands", SC33-8411.
1481
1482 This driver is also available as a module. This module will be
1483 called zfcp. If you want to compile it as a module, say M here
1484 and read <file:Documentation/kbuild/modules.rst>.
1485
1486 config SCSI_PMCRAID
1487 tristate "PMC SIERRA Linux MaxRAID adapter support"
1488 depends on PCI && SCSI && NET
1489 select SGL_ALLOC
1490 help
1491 This driver supports the PMC SIERRA MaxRAID adapters.
1492
1493 config SCSI_PM8001
1494 tristate "PMC-Sierra SPC 8001 SAS/SATA Based Host Adapter driver"
1495 depends on PCI && SCSI
1496 select SCSI_SAS_LIBSAS
1497 help
1498 This driver supports PMC-Sierra PCIE SAS/SATA 8x6G SPC 8001 chip
1499 based host adapters.
1500
1501 config SCSI_BFA_FC
1502 tristate "Brocade BFA Fibre Channel Support"
1503 depends on PCI && SCSI
1504 depends on SCSI_FC_ATTRS
1505 help
1506 This bfa driver supports all Brocade PCIe FC/FCOE host adapters.
1507
1508 To compile this driver as a module, choose M here. The module will
1509 be called bfa.
1510
1511 config SCSI_VIRTIO
1512 tristate "virtio-scsi support"
1513 depends on VIRTIO
1514 help
1515 This is the virtual HBA driver for virtio. If the kernel will
1516 be used in a virtual machine, say Y or M.
1517
1518 source "drivers/scsi/csiostor/Kconfig"
1519
1520 source "drivers/scsi/pcmcia/Kconfig"
1521
1522 endif # SCSI_LOWLEVEL
1523
1524 source "drivers/scsi/device_handler/Kconfig"
1525
1526 endmenu
