OSCL-LXR

0001 # SPDX-License-Identifier: GPL-2.0
0002 #
0003 # Makefile for industrial I/O gyroscope sensor drivers
0004 #
0005
0006 # When adding new entries keep the list in alphabetical order
0007 obj-$(CONFIG_ADIS16080) += adis16080.o
0008 obj-$(CONFIG_ADIS16130) += adis16130.o
0009 obj-$(CONFIG_ADIS16136) += adis16136.o
0010 obj-$(CONFIG_ADIS16260) += adis16260.o
0011 obj-$(CONFIG_ADXRS290) += adxrs290.o
0012 obj-$(CONFIG_ADXRS450) += adxrs450.o
0013 obj-$(CONFIG_BMG160) += bmg160_core.o
0014 obj-$(CONFIG_BMG160_I2C) += bmg160_i2c.o
0015 obj-$(CONFIG_BMG160_SPI) += bmg160_spi.o
0016 obj-$(CONFIG_FXAS21002C) += fxas21002c_core.o
0017 obj-$(CONFIG_FXAS21002C_I2C) += fxas21002c_i2c.o
0018 obj-$(CONFIG_FXAS21002C_SPI) += fxas21002c_spi.o
0019
0020 obj-$(CONFIG_HID_SENSOR_GYRO_3D) += hid-sensor-gyro-3d.o
0021
0022 # Currently this is rolled into one module, split it if
0023 # we ever create a separate SPI interface for MPU-3050
0024 obj-$(CONFIG_MPU3050) += mpu3050.o
0025 mpu3050-objs := mpu3050-core.o mpu3050-i2c.o
0026
0027 itg3200-y               := itg3200_core.o
0028 itg3200-$(CONFIG_IIO_BUFFER) += itg3200_buffer.o
0029 obj-$(CONFIG_ITG3200)   += itg3200.o
0030
0031 obj-$(CONFIG_IIO_SSP_SENSORS_COMMONS) += ssp_gyro_sensor.o
0032
0033 obj-$(CONFIG_IIO_ST_GYRO_3AXIS) += st_gyro.o
0034 st_gyro-y := st_gyro_core.o
0035 st_gyro-$(CONFIG_IIO_BUFFER) += st_gyro_buffer.o
0036
0037 obj-$(CONFIG_IIO_ST_GYRO_I2C_3AXIS) += st_gyro_i2c.o
0038 obj-$(CONFIG_IIO_ST_GYRO_SPI_3AXIS) += st_gyro_spi.o