0001 /*
0002 * QorIQ FMan v3 10g port #1 device tree stub [ controller @ offset 0x500000 ]
0003 *
0004 * Copyright 2012 - 2015 Freescale Semiconductor Inc.
0005 *
0006 * Redistribution and use in source and binary forms, with or without
0007 * modification, are permitted provided that the following conditions are met:
0008 * * Redistributions of source code must retain the above copyright
0009 * notice, this list of conditions and the following disclaimer.
0010 * * Redistributions in binary form must reproduce the above copyright
0011 * notice, this list of conditions and the following disclaimer in the
0012 * documentation and/or other materials provided with the distribution.
0013 * * Neither the name of Freescale Semiconductor nor the
0014 * names of its contributors may be used to endorse or promote products
0015 * derived from this software without specific prior written permission.
0016 *
0017 *
0018 * ALTERNATIVELY, this software may be distributed under the terms of the
0019 * GNU General Public License ("GPL") as published by the Free Software
0020 * Foundation, either version 2 of that License or (at your option) any
0021 * later version.
0022 *
0023 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
0024 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
0025 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
0026 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
0027 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
0028 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
0029 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
0030 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
0031 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
0032 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
0033 */
0034
0035 fman@500000 {
0036 fman1_rx_0x11: port@91000 {
0037 cell-index = <0x11>;
0038 compatible = "fsl,fman-v3-port-rx";
0039 reg = <0x91000 0x1000>;
0040 fsl,fman-10g-port;
0041 };
0042
0043 fman1_tx_0x31: port@b1000 {
0044 cell-index = <0x31>;
0045 compatible = "fsl,fman-v3-port-tx";
0046 reg = <0xb1000 0x1000>;
0047 fsl,fman-10g-port;
0048 };
0049
0050 ethernet@f2000 {
0051 cell-index = <0x9>;
0052 compatible = "fsl,fman-memac";
0053 reg = <0xf2000 0x1000>;
0054 fsl,fman-ports = <&fman1_rx_0x11 &fman1_tx_0x31>;
0055 pcsphy-handle = <&pcsphy15>;
0056 };
0057
0058 mdio@f3000 {
0059 #address-cells = <1>;
0060 #size-cells = <0>;
0061 compatible = "fsl,fman-memac-mdio", "fsl,fman-xmdio";
0062 reg = <0xf3000 0x1000>;
0063 fsl,erratum-a011043; /* must ignore read errors */
0064
0065 pcsphy15: ethernet-phy@0 {
0066 reg = <0x0>;
0067 };
0068 };
0069 };
