0001 /*
0002 * BSC9132 QDS Device Tree Source stub (no addresses or top-level ranges)
0003 *
0004 * Copyright 2014 Freescale Semiconductor Inc.
0005 *
0006 * Redistribution and use in source and binary forms, with or without
0007 * modification, are permitted provided that the following conditions are met:
0008 * * Redistributions of source code must retain the above copyright
0009 * notice, this list of conditions and the following disclaimer.
0010 * * Redistributions in binary form must reproduce the above copyright
0011 * notice, this list of conditions and the following disclaimer in the
0012 * documentation and/or other materials provided with the distribution.
0013 * * Neither the name of Freescale Semiconductor nor the
0014 * names of its contributors may be used to endorse or promote products
0015 * derived from this software without specific prior written permission.
0016 *
0017 *
0018 * ALTERNATIVELY, this software may be distributed under the terms of the
0019 * GNU General Public License ("GPL") as published by the Free Software
0020 * Foundation, either version 2 of that License or (at your option) any
0021 * later version.
0022 *
0023 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
0024 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
0025 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
0026 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
0027 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
0028 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
0029 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
0030 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
0031 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
0032 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
0033 */
0034
0035 &ifc {
0036 nor@0,0 {
0037 #address-cells = <1>;
0038 #size-cells = <1>;
0039 compatible = "cfi-flash";
0040 reg = <0x0 0x0 0x8000000>;
0041 bank-width = <2>;
0042 device-width = <1>;
0043 };
0044
0045 nand@1,0 {
0046 #address-cells = <1>;
0047 #size-cells = <1>;
0048 compatible = "fsl,ifc-nand";
0049 reg = <0x1 0x0 0x4000>;
0050 };
0051 };
0052
0053 &soc {
0054 spi@7000 {
0055 flash@0 {
0056 #address-cells = <1>;
0057 #size-cells = <1>;
0058 compatible = "spansion,s25sl12801", "jedec,spi-nor";
0059 reg = <0>;
0060 spi-max-frequency = <30000000>;
0061 };
0062 };
0063
0064 i2c@3000 {
0065 fpga: fpga@66 {
0066 compatible = "fsl,bsc9132qds-fpga", "fsl,fpga-qixis-i2c";
0067 reg = <0x66>;
0068 };
0069 };
0070
0071 usb@22000 {
0072 phy_type = "ulpi";
0073 };
0074
0075 mdio@24000 {
0076 phy0: ethernet-phy@0 {
0077 reg = <0x0>;
0078 };
0079
0080 phy1: ethernet-phy@1 {
0081 reg = <0x1>;
0082 };
0083
0084 tbi0: tbi-phy@11 {
0085 reg = <0x1f>;
0086 device_type = "tbi-phy";
0087 };
0088 };
0089
0090 ptp_clock@b0e00 {
0091 compatible = "fsl,etsec-ptp";
0092 reg = <0xb0e00 0xb0>;
0093 interrupts = <68 2 0 0 69 2 0 0>;
0094 fsl,tclk-period = <5>;
0095 fsl,tmr-prsc = <2>;
0096 fsl,tmr-add = <0xcccccccd>;
0097 fsl,tmr-fiper1 = <999999995>;
0098 fsl,tmr-fiper2 = <99990>;
0099 fsl,max-adj = <249999999>;
0100 };
0101
0102 enet0: ethernet@b0000 {
0103 phy-handle = <&phy0>;
0104 tbi-handle = <&tbi0>;
0105 phy-connection-type = "sgmii";
0106 };
0107
0108 enet1: ethernet@b1000 {
0109 phy-handle = <&phy1>;
0110 tbi-handle = <&tbi0>;
0111 phy-connection-type = "sgmii";
0112 };
0113 };
