0001 /*
0002 * BSC9131 RDB Device Tree Source stub (no addresses or top-level ranges)
0003 *
0004 * Copyright 2011-2012 Freescale Semiconductor Inc.
0005 *
0006 * Redistribution and use in source and binary forms, with or without
0007 * modification, are permitted provided that the following conditions are met:
0008 * * Redistributions of source code must retain the above copyright
0009 * notice, this list of conditions and the following disclaimer.
0010 * * Redistributions in binary form must reproduce the above copyright
0011 * notice, this list of conditions and the following disclaimer in the
0012 * documentation and/or other materials provided with the distribution.
0013 * * Neither the name of Freescale Semiconductor nor the
0014 * names of its contributors may be used to endorse or promote products
0015 * derived from this software without specific prior written permission.
0016 *
0017 *
0018 * ALTERNATIVELY, this software may be distributed under the terms of the
0019 * GNU General Public License ("GPL") as published by the Free Software
0020 * Foundation, either version 2 of that License or (at your option) any
0021 * later version.
0022 *
0023 * THIS SOFTWARE IS PROVIDED BY Freescale Semiconductor ``AS IS'' AND ANY
0024 * EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
0025 * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
0026 * DISCLAIMED. IN NO EVENT SHALL Freescale Semiconductor BE LIABLE FOR ANY
0027 * DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
0028 * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
0029 * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
0030 * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
0031 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS
0032 * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
0033 */
0034
0035 &board_ifc {
0036
0037 nand@0,0 {
0038 #address-cells = <1>;
0039 #size-cells = <1>;
0040 compatible = "fsl,ifc-nand";
0041 reg = <0x0 0x0 0x4000>;
0042
0043 };
0044 };
0045
0046 &board_soc {
0047 /* BSC9131RDB does not have any device on i2c@3100 */
0048 i2c@3100 {
0049 status = "disabled";
0050 };
0051
0052 spi@7000 {
0053 flash@0 {
0054 #address-cells = <1>;
0055 #size-cells = <1>;
0056 compatible = "spansion,s25sl12801", "jedec,spi-nor";
0057 reg = <0>;
0058 spi-max-frequency = <50000000>;
0059
0060 };
0061 };
0062
0063 usb@22000 {
0064 phy_type = "ulpi";
0065 };
0066
0067 mdio@24000 {
0068 phy0: ethernet-phy@0 {
0069 interrupts = <3 1 0 0>;
0070 reg = <0x0>;
0071 };
0072
0073 phy1: ethernet-phy@1 {
0074 interrupts = <2 1 0 0>;
0075 reg = <0x3>;
0076 };
0077 };
0078
0079 sdhc@2e000 {
0080 status = "disabled";
0081 };
0082
0083 ptp_clock@b0e00 {
0084 compatible = "fsl,etsec-ptp";
0085 reg = <0xb0e00 0xb0>;
0086 interrupts = <68 2 0 0 69 2 0 0>;
0087 fsl,tclk-period = <5>;
0088 fsl,tmr-prsc = <2>;
0089 fsl,tmr-add = <0xcccccccd>;
0090 fsl,tmr-fiper1 = <999999995>;
0091 fsl,tmr-fiper2 = <99990>;
0092 fsl,max-adj = <249999999>;
0093 };
0094
0095 enet0: ethernet@b0000 {
0096 phy-handle = <&phy0>;
0097 phy-connection-type = "rgmii-id";
0098 };
0099
0100 enet1: ethernet@b1000 {
0101 phy-handle = <&phy1>;
0102 phy-connection-type = "rgmii-id";
0103 };
0104 };
