OSCL-LXR

0001 # SPDX-License-Identifier: GPL-2.0
0002 #
0003 # Makefile for the linux kernel.
0004 #
0005
0006 ifdef CONFIG_ARCH_OMAP1_ANY
0007
0008 # Common support
0009 obj-y := io.o id.o sram-init.o sram.o time.o irq.o mux.o flash.o \
0010          serial.o devices.o dma.o omap-dma.o fb.o
0011 obj-y += clock.o clock_data.o opp_data.o reset.o pm_bus.o timer.o
0012
0013 ifneq ($(CONFIG_SND_SOC_OMAP_MCBSP),)
0014 obj-y += mcbsp.o
0015 endif
0016
0017 obj-$(CONFIG_OMAP_32K_TIMER)    += timer32k.o
0018
0019 # OCPI interconnect support for 1710, 1610 and 5912
0020 obj-$(CONFIG_ARCH_OMAP16XX) += ocpi.o
0021
0022 # Power Management
0023 obj-$(CONFIG_PM) += pm.o sleep.o
0024
0025 i2c-omap-$(CONFIG_I2C_OMAP)             := i2c.o
0026 obj-y                                   += $(i2c-omap-m) $(i2c-omap-y)
0027
0028 led-y := leds.o
0029
0030 usb-fs-$(CONFIG_USB_SUPPORT)            := usb.o
0031 obj-y                                   += $(usb-fs-m) $(usb-fs-y)
0032
0033 # Specific board support
0034 obj-$(CONFIG_MACH_OMAP_H2)              += board-h2.o board-h2-mmc.o \
0035                                            board-nand.o
0036 obj-$(CONFIG_MACH_OMAP_INNOVATOR)       += board-innovator.o
0037 obj-$(CONFIG_MACH_OMAP_GENERIC)         += board-generic.o
0038 obj-$(CONFIG_MACH_OMAP_PERSEUS2)        += board-perseus2.o board-nand.o
0039 obj-$(CONFIG_MACH_OMAP_FSAMPLE)         += board-fsample.o board-nand.o
0040 obj-$(CONFIG_MACH_OMAP_OSK)             += board-osk.o
0041 obj-$(CONFIG_MACH_OMAP_H3)              += board-h3.o board-h3-mmc.o \
0042                                            board-nand.o
0043 obj-$(CONFIG_MACH_OMAP_PALMTE)          += board-palmte.o
0044 obj-$(CONFIG_MACH_OMAP_PALMZ71)         += board-palmz71.o
0045 obj-$(CONFIG_MACH_OMAP_PALMTT)          += board-palmtt.o
0046 obj-$(CONFIG_MACH_NOKIA770)             += board-nokia770.o
0047 obj-$(CONFIG_MACH_AMS_DELTA)            += board-ams-delta.o ams-delta-fiq.o \
0048                                            ams-delta-fiq-handler.o
0049 obj-$(CONFIG_MACH_SX1)                  += board-sx1.o board-sx1-mmc.o
0050 obj-$(CONFIG_MACH_HERALD)               += board-htcherald.o
0051
0052 ifeq ($(CONFIG_ARCH_OMAP15XX),y)
0053 # Innovator-1510 FPGA
0054 obj-$(CONFIG_MACH_OMAP_INNOVATOR)       += fpga.o
0055 endif
0056
0057 # GPIO
0058 obj-$(CONFIG_ARCH_OMAP730)              += gpio7xx.o
0059 obj-$(CONFIG_ARCH_OMAP850)              += gpio7xx.o
0060 obj-$(CONFIG_ARCH_OMAP15XX)             += gpio15xx.o
0061 obj-$(CONFIG_ARCH_OMAP16XX)             += gpio16xx.o
0062
0063 endif