0001 /*
0002 * Copyright (C) 2016 Icenowy Zheng <icenowy@aosc.xyz>
0003 *
0004 * This file is dual-licensed: you can use it either under the terms
0005 * of the GPL or the X11 license, at your option. Note that this dual
0006 * licensing only applies to this file, and not this project as a
0007 * whole.
0008 *
0009 * a) This file is free software; you can redistribute it and/or
0010 * modify it under the terms of the GNU General Public License as
0011 * published by the Free Software Foundation; either version 2 of the
0012 * License, or (at your option) any later version.
0013 *
0014 * This file is distributed in the hope that it will be useful,
0015 * but WITHOUT ANY WARRANTY; without even the implied warranty of
0016 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
0017 * GNU General Public License for more details.
0018 *
0019 * Or, alternatively,
0020 *
0021 * b) Permission is hereby granted, free of charge, to any person
0022 * obtaining a copy of this software and associated documentation
0023 * files (the "Software"), to deal in the Software without
0024 * restriction, including without limitation the rights to use,
0025 * copy, modify, merge, publish, distribute, sublicense, and/or
0026 * sell copies of the Software, and to permit persons to whom the
0027 * Software is furnished to do so, subject to the following
0028 * conditions:
0029 *
0030 * The above copyright notice and this permission notice shall be
0031 * included in all copies or substantial portions of the Software.
0032 *
0033 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
0034 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
0035 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
0036 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
0037 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
0038 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
0039 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
0040 * OTHER DEALINGS IN THE SOFTWARE.
0041 */
0042
0043 /dts-v1/;
0044 #include "sun8i-v3s.dtsi"
0045 #include "sunxi-common-regulators.dtsi"
0046
0047 / {
0048 model = "Lichee Pi Zero";
0049 compatible = "licheepi,licheepi-zero", "allwinner,sun8i-v3s";
0050
0051 aliases {
0052 serial0 = &uart0;
0053 };
0054
0055 chosen {
0056 stdout-path = "serial0:115200n8";
0057 };
0058
0059 leds {
0060 compatible = "gpio-leds";
0061
0062 blue_led {
0063 label = "licheepi:blue:usr";
0064 gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
0065 };
0066
0067 green_led {
0068 label = "licheepi:green:usr";
0069 gpios = <&pio 6 0 GPIO_ACTIVE_LOW>; /* PG0 */
0070 default-state = "on";
0071 };
0072
0073 red_led {
0074 label = "licheepi:red:usr";
0075 gpios = <&pio 6 2 GPIO_ACTIVE_LOW>; /* PG2 */
0076 };
0077 };
0078 };
0079
0080 &mmc0 {
0081 broken-cd;
0082 bus-width = <4>;
0083 vmmc-supply = <®_vcc3v3>;
0084 status = "okay";
0085 };
0086
0087 &uart0 {
0088 pinctrl-0 = <&uart0_pb_pins>;
0089 pinctrl-names = "default";
0090 status = "okay";
0091 };
0092
0093 &usb_otg {
0094 dr_mode = "otg";
0095 status = "okay";
0096 };
0097
0098 &usbphy {
0099 usb0_id_det-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>;
0100 status = "okay";
0101 };