0001 /*
0002 * Copyright (C) 2016 Hans de Goede <hdegoede@redhat.com>
0003 *
0004 * This file is dual-licensed: you can use it either under the terms
0005 * of the GPL or the X11 license, at your option. Note that this dual
0006 * licensing only applies to this file, and not this project as a
0007 * whole.
0008 *
0009 * a) This file is free software; you can redistribute it and/or
0010 * modify it under the terms of the GNU General Public License as
0011 * published by the Free Software Foundation; either version 2 of the
0012 * License, or (at your option) any later version.
0013 *
0014 * This file is distributed in the hope that it will be useful,
0015 * but WITHOUT ANY WARRANTY; without even the implied warranty of
0016 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
0017 * GNU General Public License for more details.
0018 *
0019 * Or, alternatively,
0020 *
0021 * b) Permission is hereby granted, free of charge, to any person
0022 * obtaining a copy of this software and associated documentation
0023 * files (the "Software"), to deal in the Software without
0024 * restriction, including without limitation the rights to use,
0025 * copy, modify, merge, publish, distribute, sublicense, and/or
0026 * sell copies of the Software, and to permit persons to whom the
0027 * Software is furnished to do so, subject to the following
0028 * conditions:
0029 *
0030 * The above copyright notice and this permission notice shall be
0031 * included in all copies or substantial portions of the Software.
0032 *
0033 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
0034 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
0035 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
0036 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
0037 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
0038 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
0039 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
0040 * OTHER DEALINGS IN THE SOFTWARE.
0041 */
0042
0043 /* The Orange Pi PC Plus is an extended version of the regular PC */
0044 #include "sun8i-h3-orangepi-pc.dts"
0045
0046 / {
0047 model = "Xunlong Orange Pi PC Plus";
0048 compatible = "xunlong,orangepi-pc-plus", "allwinner,sun8i-h3";
0049
0050 aliases {
0051 /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
0052 ethernet1 = &rtl8189ftv;
0053 };
0054 };
0055
0056 &mmc1 {
0057 vmmc-supply = <®_vcc3v3>;
0058 bus-width = <4>;
0059 non-removable;
0060 status = "okay";
0061
0062 /*
0063 * Explicitly define the sdio device, so that we can add an ethernet
0064 * alias for it (which e.g. makes u-boot set a mac-address).
0065 */
0066 rtl8189ftv: sdio_wifi@1 {
0067 reg = <1>;
0068 };
0069 };
0070
0071 &mmc2 {
0072 pinctrl-names = "default";
0073 pinctrl-0 = <&mmc2_8bit_pins>;
0074 vmmc-supply = <®_vcc3v3>;
0075 bus-width = <8>;
0076 non-removable;
0077 cap-mmc-hw-reset;
0078 status = "okay";
0079 };
0080
0081 &mmc2_8bit_pins {
0082 /* Increase drive strength for DDR modes */
0083 drive-strength = <40>;
0084 /* eMMC is missing pull-ups */
0085 bias-pull-up;
0086 };
