0001 /*
0002 * Copyright (C) 2016 Milo Kim <woogyom.kim@gmail.com>
0003 *
0004 * This file is dual-licensed: you can use it either under the terms
0005 * of the GPL or the X11 license, at your option. Note that this dual
0006 * licensing only applies to this file, and not this project as a
0007 * whole.
0008 *
0009 * a) This file is free software; you can redistribute it and/or
0010 * modify it under the terms of the GNU General Public License as
0011 * published by the Free Software Foundation; either version 2 of the
0012 * License, or (at your option) any later version.
0013 *
0014 * This file is distributed in the hope that it will be useful,
0015 * but WITHOUT ANY WARRANTY; without even the implied warranty of
0016 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
0017 * GNU General Public License for more details.
0018 *
0019 * Or, alternatively,
0020 *
0021 * b) Permission is hereby granted, free of charge, to any person
0022 * obtaining a copy of this software and associated documentation
0023 * files (the "Software"), to deal in the Software without
0024 * restriction, including without limitation the rights to use,
0025 * copy, modify, merge, publish, distribute, sublicense, and/or
0026 * sell copies of the Software, and to permit persons to whom the
0027 * Software is furnished to do so, subject to the following
0028 * conditions:
0029 *
0030 * The above copyright notice and this permission notice shall be
0031 * included in all copies or substantial portions of the Software.
0032 *
0033 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
0034 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
0035 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
0036 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
0037 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
0038 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
0039 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
0040 * OTHER DEALINGS IN THE SOFTWARE.
0041 */
0042
0043 #include "sun8i-h3-nanopi.dtsi"
0044
0045 / {
0046 model = "FriendlyArm NanoPi M1";
0047 compatible = "friendlyarm,nanopi-m1", "allwinner,sun8i-h3";
0048
0049 aliases {
0050 ethernet0 = &emac;
0051 };
0052
0053 connector {
0054 compatible = "hdmi-connector";
0055 type = "a";
0056
0057 port {
0058 hdmi_con_in: endpoint {
0059 remote-endpoint = <&hdmi_out_con>;
0060 };
0061 };
0062 };
0063 };
0064
0065 &de {
0066 status = "okay";
0067 };
0068
0069 &ehci1 {
0070 status = "okay";
0071 };
0072
0073 &ehci2 {
0074 status = "okay";
0075 };
0076
0077 &emac {
0078 phy-handle = <&int_mii_phy>;
0079 phy-mode = "mii";
0080 allwinner,leds-active-low;
0081 status = "okay";
0082 };
0083
0084 &hdmi {
0085 status = "okay";
0086 };
0087
0088 &hdmi_out {
0089 hdmi_out_con: endpoint {
0090 remote-endpoint = <&hdmi_con_in>;
0091 };
0092 };
0093
0094 &ir {
0095 pinctrl-names = "default";
0096 pinctrl-0 = <&r_ir_rx_pin>;
0097 status = "okay";
0098 };
0099
0100 &ohci1 {
0101 status = "okay";
0102 };
0103
0104 &ohci2 {
0105 status = "okay";
0106 };
