boot/dts/sun5i-a10s-auxtek-t003.dts

0001 /*
0002  * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
0003  *
0004  * This file is dual-licensed: you can use it either under the terms
0005  * of the GPL or the X11 license, at your option. Note that this dual
0006  * licensing only applies to this file, and not this project as a
0007  * whole.
0008  *
0009  *  a) This file is free software; you can redistribute it and/or
0010  *     modify it under the terms of the GNU General Public License as
0011  *     published by the Free Software Foundation; either version 2 of the
0012  *     License, or (at your option) any later version.
0013  *
0014  *     This file is distributed in the hope that it will be useful,
0015  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
0016  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
0017  *     GNU General Public License for more details.
0018  *
0019  * Or, alternatively,
0020  *
0021  *  b) Permission is hereby granted, free of charge, to any person
0022  *     obtaining a copy of this software and associated documentation
0023  *     files (the "Software"), to deal in the Software without
0024  *     restriction, including without limitation the rights to use,
0025  *     copy, modify, merge, publish, distribute, sublicense, and/or
0026  *     sell copies of the Software, and to permit persons to whom the
0027  *     Software is furnished to do so, subject to the following
0028  *     conditions:
0029  *
0030  *     The above copyright notice and this permission notice shall be
0031  *     included in all copies or substantial portions of the Software.
0032  *
0033  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
0034  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
0035  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
0036  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
0037  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
0038  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
0039  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
0040  *     OTHER DEALINGS IN THE SOFTWARE.
0041  */
0042
0043 /dts-v1/;
0044 #include "sun5i-a10s.dtsi"
0045 #include "sunxi-common-regulators.dtsi"
0046 #include <dt-bindings/gpio/gpio.h>
0047
0048 / {
0049         model = "Auxtek t003 A10s hdmi tv-stick";
0050         compatible = "allwinner,auxtek-t003", "allwinner,sun5i-a10s";
0051
0052         aliases {
0053                 serial0 = &uart0;
0054         };
0055
0056         chosen {
0057                 stdout-path = "serial0:115200n8";
0058         };
0059
0060         leds {
0061                 compatible = "gpio-leds";
0062                 pinctrl-names = "default";
0063                 pinctrl-0 = <&led_pins_t003>;
0064
0065                 led {
0066                         label = "t003-tv-dongle:red:usr";
0067                         gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; /* PB2 */
0068                         default-state = "on";
0069                 };
0070         };
0071 };
0072
0073 &ehci0 {
0074         status = "okay";
0075 };
0076
0077 &i2c0 {
0078         status = "okay";
0079
0080         axp152: pmic@30 {
0081                 compatible = "x-powers,axp152";
0082                 reg = <0x30>;
0083                 interrupts = <0>;
0084                 interrupt-controller;
0085                 #interrupt-cells = <1>;
0086         };
0087 };
0088
0089 &mmc0 {
0090         vmmc-supply = <&reg_vcc3v3>;
0091         bus-width = <4>;
0092         cd-gpios = <&pio 6 1 GPIO_ACTIVE_LOW>; /* PG1 */
0093         status = "okay";
0094 };
0095
0096 &ohci0 {
0097         status = "okay";
0098 };
0099
0100 &otg_sram {
0101         status = "okay";
0102 };
0103
0104 &pio {
0105         led_pins_t003: led-pin {
0106                 pins = "PB2";
0107                 function = "gpio_out";
0108                 drive-strength = <20>;
0109         };
0110 };
0111
0112 &reg_usb0_vbus {
0113         gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */
0114         status = "okay";
0115 };
0116
0117 &reg_usb1_vbus {
0118         gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; /* PB10 */
0119         status = "okay";
0120 };
0121
0122 &uart0 {
0123         pinctrl-names = "default";
0124         pinctrl-0 = <&uart0_pb_pins>;
0125         status = "okay";
0126 };
0127
0128 &usb_otg {
0129         dr_mode = "host";
0130         status = "okay";
0131 };
0132
0133 &usbphy {
0134         usb0_vbus-supply = <&reg_usb0_vbus>;
0135         usb1_vbus-supply = <&reg_usb1_vbus>;
0136         status = "okay";
0137 };