0001 /*
0002 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
0003 *
0004 * This file is dual-licensed: you can use it either under the terms
0005 * of the GPL or the X11 license, at your option. Note that this dual
0006 * licensing only applies to this file, and not this project as a
0007 * whole.
0008 *
0009 * a) This file is free software; you can redistribute it and/or
0010 * modify it under the terms of the GNU General Public License as
0011 * published by the Free Software Foundation; either version 2 of the
0012 * License, or (at your option) any later version.
0013 *
0014 * This file is distributed in the hope that it will be useful,
0015 * but WITHOUT ANY WARRANTY; without even the implied warranty of
0016 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
0017 * GNU General Public License for more details.
0018 *
0019 * Or, alternatively,
0020 *
0021 * b) Permission is hereby granted, free of charge, to any person
0022 * obtaining a copy of this software and associated documentation
0023 * files (the "Software"), to deal in the Software without
0024 * restriction, including without limitation the rights to use,
0025 * copy, modify, merge, publish, distribute, sublicense, and/or
0026 * sell copies of the Software, and to permit persons to whom the
0027 * Software is furnished to do so, subject to the following
0028 * conditions:
0029 *
0030 * The above copyright notice and this permission notice shall be
0031 * included in all copies or substantial portions of the Software.
0032 *
0033 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
0034 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
0035 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
0036 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
0037 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
0038 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
0039 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
0040 * OTHER DEALINGS IN THE SOFTWARE.
0041 */
0042
0043 /dts-v1/;
0044 #include "sun4i-a10.dtsi"
0045 #include "sunxi-common-regulators.dtsi"
0046 #include <dt-bindings/gpio/gpio.h>
0047
0048 / {
0049 model = "MK802ii";
0050 compatible = "allwinner,mk802ii", "allwinner,sun4i-a10";
0051
0052 aliases {
0053 serial0 = &uart0;
0054 };
0055
0056 chosen {
0057 stdout-path = "serial0:115200n8";
0058 };
0059 };
0060
0061 &ehci0 {
0062 status = "okay";
0063 };
0064
0065 &ehci1 {
0066 status = "okay";
0067 };
0068
0069 &i2c0 {
0070 status = "okay";
0071
0072 axp209: pmic@34 {
0073 compatible = "x-powers,axp209";
0074 reg = <0x34>;
0075 interrupts = <0>;
0076
0077 interrupt-controller;
0078 #interrupt-cells = <1>;
0079 };
0080 };
0081
0082 &mmc0 {
0083 vmmc-supply = <®_vcc3v3>;
0084 bus-width = <4>;
0085 cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
0086 status = "okay";
0087 };
0088
0089 &ohci0 {
0090 status = "okay";
0091 };
0092
0093 ®_usb1_vbus {
0094 status = "okay";
0095 };
0096
0097 ®_usb2_vbus {
0098 status = "okay";
0099 };
0100
0101 &uart0 {
0102 pinctrl-names = "default";
0103 pinctrl-0 = <&uart0_pb_pins>;
0104 status = "okay";
0105 };
0106
0107 &usbphy {
0108 usb1_vbus-supply = <®_usb1_vbus>;
0109 usb2_vbus-supply = <®_usb2_vbus>;
0110 status = "okay";
0111 };