boot/dts/sun4i-a10-ba10-tvbox.dts

0001 /*
0002  * Copyright 2014 Hans de Goede <hdegoede@redhat.com>
0003  *
0004  * This file is dual-licensed: you can use it either under the terms
0005  * of the GPL or the X11 license, at your option. Note that this dual
0006  * licensing only applies to this file, and not this project as a
0007  * whole.
0008  *
0009  *  a) This file is free software; you can redistribute it and/or
0010  *     modify it under the terms of the GNU General Public License as
0011  *     published by the Free Software Foundation; either version 2 of the
0012  *     License, or (at your option) any later version.
0013  *
0014  *     This file is distributed in the hope that it will be useful,
0015  *     but WITHOUT ANY WARRANTY; without even the implied warranty of
0016  *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
0017  *     GNU General Public License for more details.
0018  *
0019  * Or, alternatively,
0020  *
0021  *  b) Permission is hereby granted, free of charge, to any person
0022  *     obtaining a copy of this software and associated documentation
0023  *     files (the "Software"), to deal in the Software without
0024  *     restriction, including without limitation the rights to use,
0025  *     copy, modify, merge, publish, distribute, sublicense, and/or
0026  *     sell copies of the Software, and to permit persons to whom the
0027  *     Software is furnished to do so, subject to the following
0028  *     conditions:
0029  *
0030  *     The above copyright notice and this permission notice shall be
0031  *     included in all copies or substantial portions of the Software.
0032  *
0033  *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
0034  *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
0035  *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
0036  *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
0037  *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
0038  *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
0039  *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
0040  *     OTHER DEALINGS IN THE SOFTWARE.
0041  */
0042
0043 /dts-v1/;
0044 #include "sun4i-a10.dtsi"
0045 #include "sunxi-common-regulators.dtsi"
0046
0047 #include <dt-bindings/gpio/gpio.h>
0048
0049 / {
0050         model = "BA10 tvbox";
0051         compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10";
0052
0053         aliases {
0054                 serial0 = &uart0;
0055         };
0056
0057         chosen {
0058                 stdout-path = "serial0:115200n8";
0059         };
0060 };
0061
0062 &ehci0 {
0063         status = "okay";
0064 };
0065
0066 &ehci1 {
0067         status = "okay";
0068 };
0069
0070 &emac {
0071         phy-handle = <&phy1>;
0072         status = "okay";
0073 };
0074
0075 &emac_sram {
0076         status = "okay";
0077 };
0078
0079 &i2c0 {
0080         status = "okay";
0081
0082         axp209: pmic@34 {
0083                 compatible = "x-powers,axp209";
0084                 reg = <0x34>;
0085                 interrupts = <0>;
0086
0087                 interrupt-controller;
0088                 #interrupt-cells = <1>;
0089         };
0090 };
0091
0092 &ir0 {
0093         pinctrl-names = "default";
0094         pinctrl-0 = <&ir0_rx_pins>;
0095         status = "okay";
0096 };
0097
0098 &mdio {
0099         status = "okay";
0100
0101         phy1: ethernet-phy@1 {
0102                 reg = <1>;
0103         };
0104 };
0105
0106 &mmc0 {
0107         vmmc-supply = <&reg_vcc3v3>;
0108         bus-width = <4>;
0109         cd-gpios = <&pio 7 1 GPIO_ACTIVE_LOW>; /* PH1 */
0110         status = "okay";
0111 };
0112
0113 &ohci0 {
0114         status = "okay";
0115 };
0116
0117 &otg_sram {
0118         status = "okay";
0119 };
0120
0121 &reg_usb0_vbus {
0122         regulator-boot-on;
0123         status = "okay";
0124 };
0125
0126 &reg_usb1_vbus {
0127         status = "okay";
0128 };
0129
0130 &reg_usb2_vbus {
0131         gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>;
0132         status = "okay";
0133 };
0134
0135 &uart0 {
0136         pinctrl-names = "default";
0137         pinctrl-0 = <&uart0_pb_pins>;
0138         status = "okay";
0139 };
0140
0141 &usb_otg {
0142         dr_mode = "host";
0143         status = "okay";
0144 };
0145
0146 &usbphy {
0147         usb0_vbus-supply = <&reg_usb0_vbus>;
0148         usb1_vbus-supply = <&reg_usb1_vbus>;
0149         usb2_vbus-supply = <&reg_usb2_vbus>;
0150         status = "okay";
0151 };