boot/dts/qcom-ipq4019-ap.dk07.1-c1.dts

0001 // SPDX-License-Identifier: GPL-2.0
0002 // Copyright (c) 2018, The Linux Foundation. All rights reserved.
0003
0004 #include "qcom-ipq4019-ap.dk07.1.dtsi"
0005
0006 / {
0007         model = "Qualcomm Technologies, Inc. IPQ4019/AP-DK07.1-C1";
0008         compatible = "qcom,ipq4019-ap-dk07.1-c1", "qcom,ipq4019";
0009
0010         soc {
0011                 pci@40000000 {
0012                         status = "okay";
0013                         perst-gpio = <&tlmm 38 0x1>;
0014                 };
0015
0016                 spi@78b6000 {
0017                         status = "okay";
0018                 };
0019
0020                 pinctrl@1000000 {
0021                         serial_1_pins: serial1-pinmux {
0022                                 pins = "gpio8", "gpio9",
0023                                         "gpio10", "gpio11";
0024                                 function = "blsp_uart1";
0025                                 bias-disable;
0026                         };
0027
0028                         spi_0_pins: spi-0-pinmux {
0029                                 pinmux {
0030                                         function = "blsp_spi0";
0031                                         pins = "gpio13", "gpio14", "gpio15";
0032                                         bias-disable;
0033                                 };
0034                                 pinmux_cs {
0035                                         function = "gpio";
0036                                         pins = "gpio12";
0037                                         bias-disable;
0038                                         output-high;
0039                                 };
0040                         };
0041                 };
0042
0043                 serial@78b0000 {
0044                         pinctrl-0 = <&serial_1_pins>;
0045                         pinctrl-names = "default";
0046                         status = "okay";
0047                 };
0048
0049                 spi@78b5000 {
0050                         pinctrl-0 = <&spi_0_pins>;
0051                         pinctrl-names = "default";
0052                         status = "okay";
0053                         cs-gpios = <&tlmm 12 0>;
0054
0055                         flash@0 {
0056                                 #address-cells = <1>;
0057                                 #size-cells = <1>;
0058                                 reg = <0>;
0059                                 compatible = "micron,n25q128a11", "jedec,spi-nor";
0060                                 spi-max-frequency = <24000000>;
0061                         };
0062                 };
0063         };
0064 };