0001 &l4_wkup { /* 0x44c00000 */
0002 compatible = "ti,am33xx-l4-wkup", "simple-pm-bus";
0003 power-domains = <&prm_wkup>;
0004 clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_L4_WKUP_CLKCTRL 0>;
0005 clock-names = "fck";
0006 reg = <0x44c00000 0x800>,
0007 <0x44c00800 0x800>,
0008 <0x44c01000 0x400>,
0009 <0x44c01400 0x400>;
0010 reg-names = "ap", "la", "ia0", "ia1";
0011 #address-cells = <1>;
0012 #size-cells = <1>;
0013 ranges = <0x00000000 0x44c00000 0x100000>, /* segment 0 */
0014 <0x00100000 0x44d00000 0x100000>, /* segment 1 */
0015 <0x00200000 0x44e00000 0x100000>; /* segment 2 */
0016
0017 segment@0 { /* 0x44c00000 */
0018 compatible = "simple-pm-bus";
0019 #address-cells = <1>;
0020 #size-cells = <1>;
0021 ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
0022 <0x00000800 0x00000800 0x000800>, /* ap 1 */
0023 <0x00001000 0x00001000 0x000400>, /* ap 2 */
0024 <0x00001400 0x00001400 0x000400>; /* ap 3 */
0025 };
0026
0027 segment@100000 { /* 0x44d00000 */
0028 compatible = "simple-pm-bus";
0029 #address-cells = <1>;
0030 #size-cells = <1>;
0031 ranges = <0x00000000 0x00100000 0x004000>, /* ap 4 */
0032 <0x00004000 0x00104000 0x001000>, /* ap 5 */
0033 <0x00080000 0x00180000 0x002000>, /* ap 6 */
0034 <0x00082000 0x00182000 0x001000>; /* ap 7 */
0035
0036 target-module@0 { /* 0x44d00000, ap 4 28.0 */
0037 compatible = "ti,sysc-omap4", "ti,sysc";
0038 reg = <0x0 0x4>;
0039 reg-names = "rev";
0040 clocks = <&l4_wkup_aon_clkctrl AM3_L4_WKUP_AON_WKUP_M3_CLKCTRL 0>;
0041 clock-names = "fck";
0042 #address-cells = <1>;
0043 #size-cells = <1>;
0044 ranges = <0x00000000 0x00000000 0x4000>,
0045 <0x00080000 0x00080000 0x2000>;
0046
0047 wkup_m3: cpu@0 {
0048 compatible = "ti,am3352-wkup-m3";
0049 reg = <0x00000000 0x4000>,
0050 <0x00080000 0x2000>;
0051 reg-names = "umem", "dmem";
0052 resets = <&prm_wkup 3>;
0053 reset-names = "rstctrl";
0054 ti,pm-firmware = "am335x-pm-firmware.elf";
0055 };
0056 };
0057 };
0058
0059 segment@200000 { /* 0x44e00000 */
0060 compatible = "simple-pm-bus";
0061 #address-cells = <1>;
0062 #size-cells = <1>;
0063 ranges = <0x00000000 0x00200000 0x002000>, /* ap 8 */
0064 <0x00002000 0x00202000 0x001000>, /* ap 9 */
0065 <0x00003000 0x00203000 0x001000>, /* ap 10 */
0066 <0x00004000 0x00204000 0x001000>, /* ap 11 */
0067 <0x00005000 0x00205000 0x001000>, /* ap 12 */
0068 <0x00006000 0x00206000 0x001000>, /* ap 13 */
0069 <0x00007000 0x00207000 0x001000>, /* ap 14 */
0070 <0x00008000 0x00208000 0x001000>, /* ap 15 */
0071 <0x00009000 0x00209000 0x001000>, /* ap 16 */
0072 <0x0000a000 0x0020a000 0x001000>, /* ap 17 */
0073 <0x0000b000 0x0020b000 0x001000>, /* ap 18 */
0074 <0x0000c000 0x0020c000 0x001000>, /* ap 19 */
0075 <0x0000d000 0x0020d000 0x001000>, /* ap 20 */
0076 <0x0000f000 0x0020f000 0x001000>, /* ap 21 */
0077 <0x00010000 0x00210000 0x010000>, /* ap 22 */
0078 <0x00020000 0x00220000 0x010000>, /* ap 23 */
0079 <0x00030000 0x00230000 0x001000>, /* ap 24 */
0080 <0x00031000 0x00231000 0x001000>, /* ap 25 */
0081 <0x00032000 0x00232000 0x001000>, /* ap 26 */
0082 <0x00033000 0x00233000 0x001000>, /* ap 27 */
0083 <0x00034000 0x00234000 0x001000>, /* ap 28 */
0084 <0x00035000 0x00235000 0x001000>, /* ap 29 */
0085 <0x00036000 0x00236000 0x001000>, /* ap 30 */
0086 <0x00037000 0x00237000 0x001000>, /* ap 31 */
0087 <0x00038000 0x00238000 0x001000>, /* ap 32 */
0088 <0x00039000 0x00239000 0x001000>, /* ap 33 */
0089 <0x0003a000 0x0023a000 0x001000>, /* ap 34 */
0090 <0x0003e000 0x0023e000 0x001000>, /* ap 35 */
0091 <0x0003f000 0x0023f000 0x001000>, /* ap 36 */
0092 <0x0000e000 0x0020e000 0x001000>, /* ap 37 */
0093 <0x00040000 0x00240000 0x040000>, /* ap 38 */
0094 <0x00080000 0x00280000 0x001000>; /* ap 39 */
0095
0096 target-module@0 { /* 0x44e00000, ap 8 58.0 */
0097 compatible = "ti,sysc-omap4", "ti,sysc";
0098 reg = <0 0x4>;
0099 reg-names = "rev";
0100 #address-cells = <1>;
0101 #size-cells = <1>;
0102 ranges = <0x0 0x0 0x2000>;
0103
0104 prcm: prcm@0 {
0105 compatible = "ti,am3-prcm", "simple-bus";
0106 reg = <0 0x2000>;
0107 #address-cells = <1>;
0108 #size-cells = <1>;
0109 ranges = <0 0 0x2000>;
0110
0111 prcm_clocks: clocks {
0112 #address-cells = <1>;
0113 #size-cells = <0>;
0114 };
0115
0116 prcm_clockdomains: clockdomains {
0117 };
0118 };
0119 };
0120
0121 target-module@3000 { /* 0x44e03000, ap 10 0a.0 */
0122 compatible = "ti,sysc";
0123 status = "disabled";
0124 #address-cells = <1>;
0125 #size-cells = <1>;
0126 ranges = <0x0 0x3000 0x1000>;
0127 };
0128
0129 target-module@5000 { /* 0x44e05000, ap 12 30.0 */
0130 compatible = "ti,sysc";
0131 status = "disabled";
0132 #address-cells = <1>;
0133 #size-cells = <1>;
0134 ranges = <0x0 0x5000 0x1000>;
0135 };
0136
0137 gpio0_target: target-module@7000 { /* 0x44e07000, ap 14 20.0 */
0138 compatible = "ti,sysc-omap2", "ti,sysc";
0139 reg = <0x7000 0x4>,
0140 <0x7010 0x4>,
0141 <0x7114 0x4>;
0142 reg-names = "rev", "sysc", "syss";
0143 ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
0144 SYSC_OMAP2_SOFTRESET |
0145 SYSC_OMAP2_AUTOIDLE)>;
0146 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
0147 <SYSC_IDLE_NO>,
0148 <SYSC_IDLE_SMART>,
0149 <SYSC_IDLE_SMART_WKUP>;
0150 ti,syss-mask = <1>;
0151 /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
0152 clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_GPIO1_CLKCTRL 0>,
0153 <&l4_wkup_clkctrl AM3_L4_WKUP_GPIO1_CLKCTRL 18>;
0154 clock-names = "fck", "dbclk";
0155 #address-cells = <1>;
0156 #size-cells = <1>;
0157 ranges = <0x0 0x7000 0x1000>;
0158
0159 gpio0: gpio@0 {
0160 compatible = "ti,omap4-gpio";
0161 gpio-ranges = <&am33xx_pinmux 0 82 8>,
0162 <&am33xx_pinmux 8 52 4>,
0163 <&am33xx_pinmux 12 94 4>,
0164 <&am33xx_pinmux 16 71 2>,
0165 <&am33xx_pinmux 18 135 1>,
0166 <&am33xx_pinmux 19 108 2>,
0167 <&am33xx_pinmux 21 73 1>,
0168 <&am33xx_pinmux 22 8 2>,
0169 <&am33xx_pinmux 26 10 2>,
0170 <&am33xx_pinmux 28 74 1>,
0171 <&am33xx_pinmux 29 81 1>,
0172 <&am33xx_pinmux 30 28 2>;
0173 gpio-controller;
0174 #gpio-cells = <2>;
0175 interrupt-controller;
0176 #interrupt-cells = <2>;
0177 reg = <0x0 0x1000>;
0178 interrupts = <96>;
0179 };
0180 };
0181
0182 target-module@9000 { /* 0x44e09000, ap 16 04.0 */
0183 compatible = "ti,sysc-omap2", "ti,sysc";
0184 reg = <0x9050 0x4>,
0185 <0x9054 0x4>,
0186 <0x9058 0x4>;
0187 reg-names = "rev", "sysc", "syss";
0188 ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
0189 SYSC_OMAP2_SOFTRESET |
0190 SYSC_OMAP2_AUTOIDLE)>;
0191 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
0192 <SYSC_IDLE_NO>,
0193 <SYSC_IDLE_SMART>,
0194 <SYSC_IDLE_SMART_WKUP>;
0195 /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
0196 clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_UART1_CLKCTRL 0>;
0197 clock-names = "fck";
0198 #address-cells = <1>;
0199 #size-cells = <1>;
0200 ranges = <0x0 0x9000 0x1000>;
0201
0202 uart0: serial@0 {
0203 compatible = "ti,am3352-uart", "ti,omap3-uart";
0204 clock-frequency = <48000000>;
0205 reg = <0x0 0x1000>;
0206 interrupts = <72>;
0207 status = "disabled";
0208 dmas = <&edma 26 0>, <&edma 27 0>;
0209 dma-names = "tx", "rx";
0210 };
0211 };
0212
0213 target-module@b000 { /* 0x44e0b000, ap 18 48.0 */
0214 compatible = "ti,sysc-omap2", "ti,sysc";
0215 reg = <0xb000 0x8>,
0216 <0xb010 0x8>,
0217 <0xb090 0x8>;
0218 reg-names = "rev", "sysc", "syss";
0219 ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
0220 SYSC_OMAP2_ENAWAKEUP |
0221 SYSC_OMAP2_SOFTRESET |
0222 SYSC_OMAP2_AUTOIDLE)>;
0223 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
0224 <SYSC_IDLE_NO>,
0225 <SYSC_IDLE_SMART>,
0226 <SYSC_IDLE_SMART_WKUP>;
0227 ti,syss-mask = <1>;
0228 /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
0229 clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_I2C1_CLKCTRL 0>;
0230 clock-names = "fck";
0231 #address-cells = <1>;
0232 #size-cells = <1>;
0233 ranges = <0x0 0xb000 0x1000>;
0234
0235 i2c0: i2c@0 {
0236 compatible = "ti,omap4-i2c";
0237 #address-cells = <1>;
0238 #size-cells = <0>;
0239 reg = <0x0 0x1000>;
0240 interrupts = <70>;
0241 status = "disabled";
0242 };
0243 };
0244
0245 target-module@d000 { /* 0x44e0d000, ap 20 38.0 */
0246 compatible = "ti,sysc-omap4", "ti,sysc";
0247 reg = <0xd000 0x4>,
0248 <0xd010 0x4>;
0249 reg-names = "rev", "sysc";
0250 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
0251 <SYSC_IDLE_NO>,
0252 <SYSC_IDLE_SMART>,
0253 <SYSC_IDLE_SMART_WKUP>;
0254 /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
0255 clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_ADC_TSC_CLKCTRL 0>;
0256 clock-names = "fck";
0257 #address-cells = <1>;
0258 #size-cells = <1>;
0259 ranges = <0x00000000 0x0000d000 0x00001000>,
0260 <0x00001000 0x0000e000 0x00001000>;
0261
0262 tscadc: tscadc@0 {
0263 compatible = "ti,am3359-tscadc";
0264 reg = <0x0 0x1000>;
0265 interrupts = <16>;
0266 clocks = <&adc_tsc_fck>;
0267 clock-names = "fck";
0268 status = "disabled";
0269 dmas = <&edma 53 0>, <&edma 57 0>;
0270 dma-names = "fifo0", "fifo1";
0271
0272 tsc {
0273 compatible = "ti,am3359-tsc";
0274 };
0275 am335x_adc: adc {
0276 #io-channel-cells = <1>;
0277 compatible = "ti,am3359-adc";
0278 };
0279 };
0280 };
0281
0282 target-module@10000 { /* 0x44e10000, ap 22 0c.0 */
0283 compatible = "ti,sysc-omap4", "ti,sysc";
0284 reg = <0x10000 0x4>;
0285 reg-names = "rev";
0286 clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_CONTROL_CLKCTRL 0>;
0287 clock-names = "fck";
0288 ti,no-idle;
0289 #address-cells = <1>;
0290 #size-cells = <1>;
0291 ranges = <0x00000000 0x00010000 0x00010000>,
0292 <0x00010000 0x00020000 0x00010000>;
0293
0294 scm: scm@0 {
0295 compatible = "ti,am3-scm", "simple-bus";
0296 reg = <0x0 0x2000>;
0297 #address-cells = <1>;
0298 #size-cells = <1>;
0299 #pinctrl-cells = <1>;
0300 ranges = <0 0 0x2000>;
0301
0302 am33xx_pinmux: pinmux@800 {
0303 compatible = "pinctrl-single";
0304 reg = <0x800 0x238>;
0305 #pinctrl-cells = <2>;
0306 pinctrl-single,register-width = <32>;
0307 pinctrl-single,function-mask = <0x7f>;
0308 };
0309
0310 scm_conf: scm_conf@0 {
0311 compatible = "syscon", "simple-bus";
0312 reg = <0x0 0x800>;
0313 #address-cells = <1>;
0314 #size-cells = <1>;
0315 ranges = <0 0 0x800>;
0316
0317 phy_gmii_sel: phy-gmii-sel {
0318 compatible = "ti,am3352-phy-gmii-sel";
0319 reg = <0x650 0x4>;
0320 #phy-cells = <2>;
0321 };
0322
0323 scm_clocks: clocks {
0324 #address-cells = <1>;
0325 #size-cells = <0>;
0326 };
0327 };
0328
0329 usb_ctrl_mod: control@620 {
0330 compatible = "ti,am335x-usb-ctrl-module";
0331 reg = <0x620 0x10>,
0332 <0x648 0x4>;
0333 reg-names = "phy_ctrl", "wakeup";
0334 };
0335
0336 wkup_m3_ipc: wkup_m3_ipc@1324 {
0337 compatible = "ti,am3352-wkup-m3-ipc";
0338 reg = <0x1324 0x24>;
0339 interrupts = <78>;
0340 ti,rproc = <&wkup_m3>;
0341 mboxes = <&mailbox &mbox_wkupm3>;
0342 };
0343
0344 edma_xbar: dma-router@f90 {
0345 compatible = "ti,am335x-edma-crossbar";
0346 reg = <0xf90 0x40>;
0347 #dma-cells = <3>;
0348 dma-requests = <32>;
0349 dma-masters = <&edma>;
0350 };
0351
0352 scm_clockdomains: clockdomains {
0353 };
0354 };
0355 };
0356
0357 timer1_target: target-module@31000 { /* 0x44e31000, ap 25 40.0 */
0358 compatible = "ti,sysc-omap2-timer", "ti,sysc";
0359 reg = <0x31000 0x4>,
0360 <0x31010 0x4>,
0361 <0x31014 0x4>;
0362 reg-names = "rev", "sysc", "syss";
0363 ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
0364 SYSC_OMAP2_SOFTRESET |
0365 SYSC_OMAP2_AUTOIDLE)>;
0366 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
0367 <SYSC_IDLE_NO>,
0368 <SYSC_IDLE_SMART>;
0369 ti,syss-mask = <1>;
0370 /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
0371 clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_TIMER1_CLKCTRL 0>;
0372 clock-names = "fck";
0373 #address-cells = <1>;
0374 #size-cells = <1>;
0375 ranges = <0x0 0x31000 0x1000>;
0376
0377 timer1: timer@0 {
0378 compatible = "ti,am335x-timer-1ms";
0379 reg = <0x0 0x400>;
0380 interrupts = <67>;
0381 ti,timer-alwon;
0382 clocks = <&timer1_fck>;
0383 clock-names = "fck";
0384 };
0385 };
0386
0387 target-module@33000 { /* 0x44e33000, ap 27 18.0 */
0388 compatible = "ti,sysc";
0389 status = "disabled";
0390 #address-cells = <1>;
0391 #size-cells = <1>;
0392 ranges = <0x0 0x33000 0x1000>;
0393 };
0394
0395 target-module@35000 { /* 0x44e35000, ap 29 50.0 */
0396 compatible = "ti,sysc-omap2", "ti,sysc";
0397 reg = <0x35000 0x4>,
0398 <0x35010 0x4>,
0399 <0x35014 0x4>;
0400 reg-names = "rev", "sysc", "syss";
0401 ti,sysc-mask = <(SYSC_OMAP2_EMUFREE |
0402 SYSC_OMAP2_SOFTRESET)>;
0403 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
0404 <SYSC_IDLE_NO>,
0405 <SYSC_IDLE_SMART>,
0406 <SYSC_IDLE_SMART_WKUP>;
0407 ti,syss-mask = <1>;
0408 /* Domains (P, C): wkup_pwrdm, l4_wkup_clkdm */
0409 clocks = <&l4_wkup_clkctrl AM3_L4_WKUP_WD_TIMER2_CLKCTRL 0>;
0410 clock-names = "fck";
0411 #address-cells = <1>;
0412 #size-cells = <1>;
0413 ranges = <0x0 0x35000 0x1000>;
0414
0415 wdt2: wdt@0 {
0416 compatible = "ti,omap3-wdt";
0417 reg = <0x0 0x1000>;
0418 interrupts = <91>;
0419 };
0420 };
0421
0422 target-module@37000 { /* 0x44e37000, ap 31 08.0 */
0423 compatible = "ti,sysc";
0424 status = "disabled";
0425 #address-cells = <1>;
0426 #size-cells = <1>;
0427 ranges = <0x0 0x37000 0x1000>;
0428 };
0429
0430 target-module@39000 { /* 0x44e39000, ap 33 02.0 */
0431 compatible = "ti,sysc";
0432 status = "disabled";
0433 #address-cells = <1>;
0434 #size-cells = <1>;
0435 ranges = <0x0 0x39000 0x1000>;
0436 };
0437
0438 target-module@3e000 { /* 0x44e3e000, ap 35 60.0 */
0439 compatible = "ti,sysc-omap4-simple", "ti,sysc";
0440 reg = <0x3e074 0x4>,
0441 <0x3e078 0x4>;
0442 reg-names = "rev", "sysc";
0443 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
0444 <SYSC_IDLE_NO>,
0445 <SYSC_IDLE_SMART>,
0446 <SYSC_IDLE_SMART_WKUP>;
0447 /* Domains (P, C): rtc_pwrdm, l4_rtc_clkdm */
0448 power-domains = <&prm_rtc>;
0449 clocks = <&l4_rtc_clkctrl AM3_L4_RTC_RTC_CLKCTRL 0>;
0450 clock-names = "fck";
0451 #address-cells = <1>;
0452 #size-cells = <1>;
0453 ranges = <0x0 0x3e000 0x1000>;
0454
0455 rtc: rtc@0 {
0456 compatible = "ti,am3352-rtc", "ti,da830-rtc";
0457 reg = <0x0 0x1000>;
0458 interrupts = <75
0459 76>;
0460 };
0461 };
0462
0463 target-module@40000 { /* 0x44e40000, ap 38 68.0 */
0464 compatible = "ti,sysc";
0465 status = "disabled";
0466 #address-cells = <1>;
0467 #size-cells = <1>;
0468 ranges = <0x0 0x40000 0x40000>;
0469 };
0470 };
0471 };
0472
0473 &l4_fw { /* 0x47c00000 */
0474 compatible = "ti,am33xx-l4-fw", "simple-bus";
0475 reg = <0x47c00000 0x800>,
0476 <0x47c00800 0x800>,
0477 <0x47c01000 0x400>;
0478 reg-names = "ap", "la", "ia0";
0479 #address-cells = <1>;
0480 #size-cells = <1>;
0481 ranges = <0x00000000 0x47c00000 0x1000000>; /* segment 0 */
0482
0483 segment@0 { /* 0x47c00000 */
0484 compatible = "simple-bus";
0485 #address-cells = <1>;
0486 #size-cells = <1>;
0487 ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
0488 <0x00000800 0x00000800 0x000800>, /* ap 1 */
0489 <0x00001000 0x00001000 0x000400>, /* ap 2 */
0490 <0x0000c000 0x0000c000 0x001000>, /* ap 3 */
0491 <0x0000d000 0x0000d000 0x001000>, /* ap 4 */
0492 <0x0000e000 0x0000e000 0x001000>, /* ap 5 */
0493 <0x0000f000 0x0000f000 0x001000>, /* ap 6 */
0494 <0x00010000 0x00010000 0x001000>, /* ap 7 */
0495 <0x00011000 0x00011000 0x001000>, /* ap 8 */
0496 <0x0001a000 0x0001a000 0x001000>, /* ap 9 */
0497 <0x0001b000 0x0001b000 0x001000>, /* ap 10 */
0498 <0x00024000 0x00024000 0x001000>, /* ap 11 */
0499 <0x00025000 0x00025000 0x001000>, /* ap 12 */
0500 <0x00026000 0x00026000 0x001000>, /* ap 13 */
0501 <0x00027000 0x00027000 0x001000>, /* ap 14 */
0502 <0x00030000 0x00030000 0x001000>, /* ap 15 */
0503 <0x00031000 0x00031000 0x001000>, /* ap 16 */
0504 <0x00038000 0x00038000 0x001000>, /* ap 17 */
0505 <0x00039000 0x00039000 0x001000>, /* ap 18 */
0506 <0x0003a000 0x0003a000 0x001000>, /* ap 19 */
0507 <0x0003b000 0x0003b000 0x001000>, /* ap 20 */
0508 <0x0003e000 0x0003e000 0x001000>, /* ap 21 */
0509 <0x0003f000 0x0003f000 0x001000>, /* ap 22 */
0510 <0x0003c000 0x0003c000 0x001000>, /* ap 23 */
0511 <0x00040000 0x00040000 0x001000>, /* ap 24 */
0512 <0x00046000 0x00046000 0x001000>, /* ap 25 */
0513 <0x00047000 0x00047000 0x001000>, /* ap 26 */
0514 <0x00044000 0x00044000 0x001000>, /* ap 27 */
0515 <0x00045000 0x00045000 0x001000>, /* ap 28 */
0516 <0x00028000 0x00028000 0x001000>, /* ap 29 */
0517 <0x00029000 0x00029000 0x001000>, /* ap 30 */
0518 <0x00032000 0x00032000 0x001000>, /* ap 31 */
0519 <0x00033000 0x00033000 0x001000>, /* ap 32 */
0520 <0x0003d000 0x0003d000 0x001000>, /* ap 33 */
0521 <0x00041000 0x00041000 0x001000>, /* ap 34 */
0522 <0x00042000 0x00042000 0x001000>, /* ap 35 */
0523 <0x00043000 0x00043000 0x001000>, /* ap 36 */
0524 <0x00014000 0x00014000 0x001000>, /* ap 37 */
0525 <0x00015000 0x00015000 0x001000>; /* ap 38 */
0526
0527 target-module@c000 { /* 0x47c0c000, ap 3 04.0 */
0528 compatible = "ti,sysc";
0529 status = "disabled";
0530 #address-cells = <1>;
0531 #size-cells = <1>;
0532 ranges = <0x0 0xc000 0x1000>;
0533 };
0534
0535 target-module@e000 { /* 0x47c0e000, ap 5 0c.0 */
0536 compatible = "ti,sysc";
0537 status = "disabled";
0538 #address-cells = <1>;
0539 #size-cells = <1>;
0540 ranges = <0x0 0xe000 0x1000>;
0541 };
0542
0543 target-module@10000 { /* 0x47c10000, ap 7 20.0 */
0544 compatible = "ti,sysc";
0545 status = "disabled";
0546 #address-cells = <1>;
0547 #size-cells = <1>;
0548 ranges = <0x0 0x10000 0x1000>;
0549 };
0550
0551 target-module@14000 { /* 0x47c14000, ap 37 3c.0 */
0552 compatible = "ti,sysc";
0553 status = "disabled";
0554 #address-cells = <1>;
0555 #size-cells = <1>;
0556 ranges = <0x0 0x14000 0x1000>;
0557 };
0558
0559 target-module@1a000 { /* 0x47c1a000, ap 9 08.0 */
0560 compatible = "ti,sysc";
0561 status = "disabled";
0562 #address-cells = <1>;
0563 #size-cells = <1>;
0564 ranges = <0x0 0x1a000 0x1000>;
0565 };
0566
0567 target-module@24000 { /* 0x47c24000, ap 11 28.0 */
0568 compatible = "ti,sysc";
0569 status = "disabled";
0570 #address-cells = <1>;
0571 #size-cells = <1>;
0572 ranges = <0x0 0x24000 0x1000>;
0573 };
0574
0575 target-module@26000 { /* 0x47c26000, ap 13 30.0 */
0576 compatible = "ti,sysc";
0577 status = "disabled";
0578 #address-cells = <1>;
0579 #size-cells = <1>;
0580 ranges = <0x0 0x26000 0x1000>;
0581 };
0582
0583 target-module@28000 { /* 0x47c28000, ap 29 40.0 */
0584 compatible = "ti,sysc";
0585 status = "disabled";
0586 #address-cells = <1>;
0587 #size-cells = <1>;
0588 ranges = <0x0 0x28000 0x1000>;
0589 };
0590
0591 target-module@30000 { /* 0x47c30000, ap 15 14.0 */
0592 compatible = "ti,sysc";
0593 status = "disabled";
0594 #address-cells = <1>;
0595 #size-cells = <1>;
0596 ranges = <0x0 0x30000 0x1000>;
0597 };
0598
0599 target-module@32000 { /* 0x47c32000, ap 31 06.0 */
0600 compatible = "ti,sysc";
0601 status = "disabled";
0602 #address-cells = <1>;
0603 #size-cells = <1>;
0604 ranges = <0x0 0x32000 0x1000>;
0605 };
0606
0607 target-module@38000 { /* 0x47c38000, ap 17 18.0 */
0608 compatible = "ti,sysc";
0609 status = "disabled";
0610 #address-cells = <1>;
0611 #size-cells = <1>;
0612 ranges = <0x0 0x38000 0x1000>;
0613 };
0614
0615 target-module@3a000 { /* 0x47c3a000, ap 19 1c.0 */
0616 compatible = "ti,sysc";
0617 status = "disabled";
0618 #address-cells = <1>;
0619 #size-cells = <1>;
0620 ranges = <0x0 0x3a000 0x1000>;
0621 };
0622
0623 target-module@3c000 { /* 0x47c3c000, ap 23 38.0 */
0624 compatible = "ti,sysc";
0625 status = "disabled";
0626 #address-cells = <1>;
0627 #size-cells = <1>;
0628 ranges = <0x0 0x3c000 0x1000>;
0629 };
0630
0631 target-module@3e000 { /* 0x47c3e000, ap 21 10.0 */
0632 compatible = "ti,sysc";
0633 status = "disabled";
0634 #address-cells = <1>;
0635 #size-cells = <1>;
0636 ranges = <0x0 0x3e000 0x1000>;
0637 };
0638
0639 target-module@40000 { /* 0x47c40000, ap 24 02.0 */
0640 compatible = "ti,sysc";
0641 status = "disabled";
0642 #address-cells = <1>;
0643 #size-cells = <1>;
0644 ranges = <0x0 0x40000 0x1000>;
0645 };
0646
0647 target-module@42000 { /* 0x47c42000, ap 35 34.0 */
0648 compatible = "ti,sysc";
0649 status = "disabled";
0650 #address-cells = <1>;
0651 #size-cells = <1>;
0652 ranges = <0x0 0x42000 0x1000>;
0653 };
0654
0655 target-module@44000 { /* 0x47c44000, ap 27 24.0 */
0656 compatible = "ti,sysc";
0657 status = "disabled";
0658 #address-cells = <1>;
0659 #size-cells = <1>;
0660 ranges = <0x0 0x44000 0x1000>;
0661 };
0662
0663 target-module@46000 { /* 0x47c46000, ap 25 2c.0 */
0664 compatible = "ti,sysc";
0665 status = "disabled";
0666 #address-cells = <1>;
0667 #size-cells = <1>;
0668 ranges = <0x0 0x46000 0x1000>;
0669 };
0670 };
0671 };
0672
0673 &l4_fast { /* 0x4a000000 */
0674 compatible = "ti,am33xx-l4-fast", "simple-pm-bus";
0675 power-domains = <&prm_per>;
0676 clocks = <&l4hs_clkctrl AM3_L4HS_L4_HS_CLKCTRL 0>;
0677 clock-names = "fck";
0678 reg = <0x4a000000 0x800>,
0679 <0x4a000800 0x800>,
0680 <0x4a001000 0x400>;
0681 reg-names = "ap", "la", "ia0";
0682 #address-cells = <1>;
0683 #size-cells = <1>;
0684 ranges = <0x00000000 0x4a000000 0x1000000>; /* segment 0 */
0685
0686 segment@0 { /* 0x4a000000 */
0687 compatible = "simple-pm-bus";
0688 #address-cells = <1>;
0689 #size-cells = <1>;
0690 ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
0691 <0x00000800 0x00000800 0x000800>, /* ap 1 */
0692 <0x00001000 0x00001000 0x000400>, /* ap 2 */
0693 <0x00100000 0x00100000 0x008000>, /* ap 3 */
0694 <0x00108000 0x00108000 0x001000>, /* ap 4 */
0695 <0x00180000 0x00180000 0x020000>, /* ap 5 */
0696 <0x001a0000 0x001a0000 0x001000>, /* ap 6 */
0697 <0x00200000 0x00200000 0x080000>, /* ap 7 */
0698 <0x00280000 0x00280000 0x001000>, /* ap 8 */
0699 <0x00300000 0x00300000 0x080000>, /* ap 9 */
0700 <0x00380000 0x00380000 0x001000>; /* ap 10 */
0701
0702 target-module@100000 { /* 0x4a100000, ap 3 08.0 */
0703 compatible = "ti,sysc-omap4-simple", "ti,sysc";
0704 reg = <0x101200 0x4>,
0705 <0x101208 0x4>,
0706 <0x101204 0x4>;
0707 reg-names = "rev", "sysc", "syss";
0708 ti,sysc-mask = <0>;
0709 ti,sysc-midle = <SYSC_IDLE_FORCE>,
0710 <SYSC_IDLE_NO>;
0711 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
0712 <SYSC_IDLE_NO>;
0713 ti,syss-mask = <1>;
0714 clocks = <&cpsw_125mhz_clkctrl AM3_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>;
0715 clock-names = "fck";
0716 #address-cells = <1>;
0717 #size-cells = <1>;
0718 ranges = <0x0 0x100000 0x8000>;
0719
0720 mac: ethernet@0 {
0721 compatible = "ti,am335x-cpsw","ti,cpsw";
0722 clocks = <&cpsw_125mhz_gclk>, <&cpsw_cpts_rft_clk>;
0723 clock-names = "fck", "cpts";
0724 cpdma_channels = <8>;
0725 ale_entries = <1024>;
0726 bd_ram_size = <0x2000>;
0727 mac_control = <0x20>;
0728 slaves = <2>;
0729 active_slave = <0>;
0730 cpts_clock_mult = <0x80000000>;
0731 cpts_clock_shift = <29>;
0732 reg = <0x0 0x800
0733 0x1200 0x100>;
0734 #address-cells = <1>;
0735 #size-cells = <1>;
0736 /*
0737 * c0_rx_thresh_pend
0738 * c0_rx_pend
0739 * c0_tx_pend
0740 * c0_misc_pend
0741 */
0742 interrupts = <40 41 42 43>;
0743 ranges = <0 0 0x8000>;
0744 syscon = <&scm_conf>;
0745 status = "disabled";
0746
0747 davinci_mdio: mdio@1000 {
0748 compatible = "ti,cpsw-mdio","ti,davinci_mdio";
0749 clocks = <&cpsw_125mhz_clkctrl AM3_CPSW_125MHZ_CPGMAC0_CLKCTRL 0>;
0750 clock-names = "fck";
0751 #address-cells = <1>;
0752 #size-cells = <0>;
0753 bus_freq = <1000000>;
0754 reg = <0x1000 0x100>;
0755 status = "disabled";
0756 };
0757
0758 cpsw_emac0: slave@200 {
0759 /* Filled in by U-Boot */
0760 mac-address = [ 00 00 00 00 00 00 ];
0761 phys = <&phy_gmii_sel 1 1>;
0762 };
0763
0764 cpsw_emac1: slave@300 {
0765 /* Filled in by U-Boot */
0766 mac-address = [ 00 00 00 00 00 00 ];
0767 phys = <&phy_gmii_sel 2 1>;
0768 };
0769 };
0770
0771 mac_sw: switch@0 {
0772 compatible = "ti,am335x-cpsw-switch", "ti,cpsw-switch";
0773 reg = <0x0 0x4000>;
0774 ranges = <0 0 0x4000>;
0775 clocks = <&cpsw_125mhz_gclk>;
0776 clock-names = "fck";
0777 #address-cells = <1>;
0778 #size-cells = <1>;
0779 syscon = <&scm_conf>;
0780 status = "disabled";
0781
0782 interrupts = <40 41 42 43>;
0783 interrupt-names = "rx_thresh", "rx", "tx", "misc";
0784
0785 ethernet-ports {
0786 #address-cells = <1>;
0787 #size-cells = <0>;
0788
0789 cpsw_port1: port@1 {
0790 reg = <1>;
0791 label = "port1";
0792 mac-address = [ 00 00 00 00 00 00 ];
0793 phys = <&phy_gmii_sel 1 1>;
0794 };
0795
0796 cpsw_port2: port@2 {
0797 reg = <2>;
0798 label = "port2";
0799 mac-address = [ 00 00 00 00 00 00 ];
0800 phys = <&phy_gmii_sel 2 1>;
0801 };
0802 };
0803
0804 davinci_mdio_sw: mdio@1000 {
0805 compatible = "ti,cpsw-mdio","ti,davinci_mdio";
0806 clocks = <&cpsw_125mhz_gclk>;
0807 clock-names = "fck";
0808 #address-cells = <1>;
0809 #size-cells = <0>;
0810 bus_freq = <1000000>;
0811 reg = <0x1000 0x100>;
0812 };
0813
0814 cpts {
0815 clocks = <&cpsw_cpts_rft_clk>;
0816 clock-names = "cpts";
0817 };
0818 };
0819 };
0820
0821 target-module@180000 { /* 0x4a180000, ap 5 10.0 */
0822 compatible = "ti,sysc";
0823 status = "disabled";
0824 #address-cells = <1>;
0825 #size-cells = <1>;
0826 ranges = <0x0 0x180000 0x20000>;
0827 };
0828
0829 target-module@200000 { /* 0x4a200000, ap 7 02.0 */
0830 compatible = "ti,sysc";
0831 status = "disabled";
0832 #address-cells = <1>;
0833 #size-cells = <1>;
0834 ranges = <0x0 0x200000 0x80000>;
0835 };
0836
0837 pruss_tm: target-module@300000 { /* 0x4a300000, ap 9 04.0 */
0838 compatible = "ti,sysc-pruss", "ti,sysc";
0839 reg = <0x326000 0x4>,
0840 <0x326004 0x4>;
0841 reg-names = "rev", "sysc";
0842 ti,sysc-mask = <(SYSC_PRUSS_STANDBY_INIT |
0843 SYSC_PRUSS_SUB_MWAIT)>;
0844 ti,sysc-midle = <SYSC_IDLE_FORCE>,
0845 <SYSC_IDLE_NO>,
0846 <SYSC_IDLE_SMART>;
0847 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
0848 <SYSC_IDLE_NO>,
0849 <SYSC_IDLE_SMART>;
0850 clocks = <&pruss_ocp_clkctrl AM3_PRUSS_OCP_PRUSS_CLKCTRL 0>;
0851 clock-names = "fck";
0852 resets = <&prm_per 1>;
0853 reset-names = "rstctrl";
0854 #address-cells = <1>;
0855 #size-cells = <1>;
0856 ranges = <0x0 0x300000 0x80000>;
0857 status = "disabled";
0858
0859 pruss: pruss@0 {
0860 compatible = "ti,am3356-pruss";
0861 reg = <0x0 0x80000>;
0862 #address-cells = <1>;
0863 #size-cells = <1>;
0864 ranges;
0865
0866 pruss_mem: memories@0 {
0867 reg = <0x0 0x2000>,
0868 <0x2000 0x2000>,
0869 <0x10000 0x3000>;
0870 reg-names = "dram0", "dram1",
0871 "shrdram2";
0872 };
0873
0874 pruss_cfg: cfg@26000 {
0875 compatible = "ti,pruss-cfg", "syscon";
0876 reg = <0x26000 0x2000>;
0877 #address-cells = <1>;
0878 #size-cells = <1>;
0879 ranges = <0x0 0x26000 0x2000>;
0880
0881 clocks {
0882 #address-cells = <1>;
0883 #size-cells = <0>;
0884
0885 pruss_iepclk_mux: iepclk-mux@30 {
0886 reg = <0x30>;
0887 #clock-cells = <0>;
0888 clocks = <&l3_gclk>, /* icss_iep_gclk */
0889 <&pruss_ocp_gclk>; /* icss_ocp_gclk */
0890 };
0891 };
0892 };
0893
0894 pruss_mii_rt: mii-rt@32000 {
0895 compatible = "ti,pruss-mii", "syscon";
0896 reg = <0x32000 0x58>;
0897 };
0898
0899 pruss_intc: interrupt-controller@20000 {
0900 compatible = "ti,pruss-intc";
0901 reg = <0x20000 0x2000>;
0902 interrupts = <20 21 22 23 24 25 26 27>;
0903 interrupt-names = "host_intr0", "host_intr1",
0904 "host_intr2", "host_intr3",
0905 "host_intr4", "host_intr5",
0906 "host_intr6", "host_intr7";
0907 interrupt-controller;
0908 #interrupt-cells = <3>;
0909 };
0910
0911 pru0: pru@34000 {
0912 compatible = "ti,am3356-pru";
0913 reg = <0x34000 0x2000>,
0914 <0x22000 0x400>,
0915 <0x22400 0x100>;
0916 reg-names = "iram", "control", "debug";
0917 firmware-name = "am335x-pru0-fw";
0918 };
0919
0920 pru1: pru@38000 {
0921 compatible = "ti,am3356-pru";
0922 reg = <0x38000 0x2000>,
0923 <0x24000 0x400>,
0924 <0x24400 0x100>;
0925 reg-names = "iram", "control", "debug";
0926 firmware-name = "am335x-pru1-fw";
0927 };
0928
0929 pruss_mdio: mdio@32400 {
0930 compatible = "ti,davinci_mdio";
0931 reg = <0x32400 0x90>;
0932 clocks = <&dpll_core_m4_ck>;
0933 clock-names = "fck";
0934 bus_freq = <1000000>;
0935 #address-cells = <1>;
0936 #size-cells = <0>;
0937 status = "disabled";
0938 };
0939 };
0940 };
0941 };
0942 };
0943
0944 &l4_mpuss { /* 0x4b140000 */
0945 compatible = "ti,am33xx-l4-mpuss", "simple-bus";
0946 reg = <0x4b144400 0x100>,
0947 <0x4b144800 0x400>;
0948 reg-names = "la", "ap";
0949 #address-cells = <1>;
0950 #size-cells = <1>;
0951 ranges = <0x00000000 0x4b140000 0x008000>; /* segment 0 */
0952
0953 segment@0 { /* 0x4b140000 */
0954 compatible = "simple-bus";
0955 #address-cells = <1>;
0956 #size-cells = <1>;
0957 ranges = <0x00004800 0x00004800 0x000400>, /* ap 0 */
0958 <0x00001000 0x00001000 0x001000>, /* ap 1 */
0959 <0x00002000 0x00002000 0x001000>, /* ap 2 */
0960 <0x00004000 0x00004000 0x000400>, /* ap 3 */
0961 <0x00005000 0x00005000 0x000400>, /* ap 4 */
0962 <0x00000000 0x00000000 0x001000>, /* ap 5 */
0963 <0x00003000 0x00003000 0x001000>, /* ap 6 */
0964 <0x00000800 0x00000800 0x000800>; /* ap 7 */
0965
0966 target-module@0 { /* 0x4b140000, ap 5 02.2 */
0967 compatible = "ti,sysc";
0968 status = "disabled";
0969 #address-cells = <1>;
0970 #size-cells = <1>;
0971 ranges = <0x00000000 0x00000000 0x00001000>,
0972 <0x00001000 0x00001000 0x00001000>,
0973 <0x00002000 0x00002000 0x00001000>;
0974 };
0975
0976 target-module@3000 { /* 0x4b143000, ap 6 04.0 */
0977 compatible = "ti,sysc";
0978 status = "disabled";
0979 #address-cells = <1>;
0980 #size-cells = <1>;
0981 ranges = <0x0 0x3000 0x1000>;
0982 };
0983 };
0984 };
0985
0986 &l4_per { /* 0x48000000 */
0987 compatible = "ti,am33xx-l4-per", "simple-pm-bus";
0988 power-domains = <&prm_per>;
0989 clocks = <&l4ls_clkctrl AM3_L4LS_L4_LS_CLKCTRL 0>;
0990 clock-names = "fck";
0991 reg = <0x48000000 0x800>,
0992 <0x48000800 0x800>,
0993 <0x48001000 0x400>,
0994 <0x48001400 0x400>,
0995 <0x48001800 0x400>,
0996 <0x48001c00 0x400>;
0997 reg-names = "ap", "la", "ia0", "ia1", "ia2", "ia3";
0998 #address-cells = <1>;
0999 #size-cells = <1>;
1000 ranges = <0x00000000 0x48000000 0x100000>, /* segment 0 */
1001 <0x00100000 0x48100000 0x100000>, /* segment 1 */
1002 <0x00200000 0x48200000 0x100000>, /* segment 2 */
1003 <0x00300000 0x48300000 0x100000>, /* segment 3 */
1004 <0x46000000 0x46000000 0x400000>, /* l3 data port */
1005 <0x46400000 0x46400000 0x400000>; /* l3 data port */
1006
1007 segment@0 { /* 0x48000000 */
1008 compatible = "simple-pm-bus";
1009 #address-cells = <1>;
1010 #size-cells = <1>;
1011 ranges = <0x00000000 0x00000000 0x000800>, /* ap 0 */
1012 <0x00000800 0x00000800 0x000800>, /* ap 1 */
1013 <0x00001000 0x00001000 0x000400>, /* ap 2 */
1014 <0x00001400 0x00001400 0x000400>, /* ap 3 */
1015 <0x00001800 0x00001800 0x000400>, /* ap 4 */
1016 <0x00001c00 0x00001c00 0x000400>, /* ap 5 */
1017 <0x00008000 0x00008000 0x001000>, /* ap 6 */
1018 <0x00009000 0x00009000 0x001000>, /* ap 7 */
1019 <0x00016000 0x00016000 0x001000>, /* ap 8 */
1020 <0x00017000 0x00017000 0x001000>, /* ap 9 */
1021 <0x00022000 0x00022000 0x001000>, /* ap 10 */
1022 <0x00023000 0x00023000 0x001000>, /* ap 11 */
1023 <0x00024000 0x00024000 0x001000>, /* ap 12 */
1024 <0x00025000 0x00025000 0x001000>, /* ap 13 */
1025 <0x0002a000 0x0002a000 0x001000>, /* ap 14 */
1026 <0x0002b000 0x0002b000 0x001000>, /* ap 15 */
1027 <0x00038000 0x00038000 0x002000>, /* ap 16 */
1028 <0x0003a000 0x0003a000 0x001000>, /* ap 17 */
1029 <0x00014000 0x00014000 0x001000>, /* ap 18 */
1030 <0x00015000 0x00015000 0x001000>, /* ap 19 */
1031 <0x0003c000 0x0003c000 0x002000>, /* ap 20 */
1032 <0x0003e000 0x0003e000 0x001000>, /* ap 21 */
1033 <0x00040000 0x00040000 0x001000>, /* ap 22 */
1034 <0x00041000 0x00041000 0x001000>, /* ap 23 */
1035 <0x00042000 0x00042000 0x001000>, /* ap 24 */
1036 <0x00043000 0x00043000 0x001000>, /* ap 25 */
1037 <0x00044000 0x00044000 0x001000>, /* ap 26 */
1038 <0x00045000 0x00045000 0x001000>, /* ap 27 */
1039 <0x00046000 0x00046000 0x001000>, /* ap 28 */
1040 <0x00047000 0x00047000 0x001000>, /* ap 29 */
1041 <0x00048000 0x00048000 0x001000>, /* ap 30 */
1042 <0x00049000 0x00049000 0x001000>, /* ap 31 */
1043 <0x0004c000 0x0004c000 0x001000>, /* ap 32 */
1044 <0x0004d000 0x0004d000 0x001000>, /* ap 33 */
1045 <0x00050000 0x00050000 0x002000>, /* ap 34 */
1046 <0x00052000 0x00052000 0x001000>, /* ap 35 */
1047 <0x00060000 0x00060000 0x001000>, /* ap 36 */
1048 <0x00061000 0x00061000 0x001000>, /* ap 37 */
1049 <0x00080000 0x00080000 0x010000>, /* ap 38 */
1050 <0x00090000 0x00090000 0x001000>, /* ap 39 */
1051 <0x000a0000 0x000a0000 0x010000>, /* ap 40 */
1052 <0x000b0000 0x000b0000 0x001000>, /* ap 41 */
1053 <0x00030000 0x00030000 0x001000>, /* ap 77 */
1054 <0x00031000 0x00031000 0x001000>, /* ap 78 */
1055 <0x0004a000 0x0004a000 0x001000>, /* ap 85 */
1056 <0x0004b000 0x0004b000 0x001000>, /* ap 86 */
1057 <0x000c8000 0x000c8000 0x001000>, /* ap 87 */
1058 <0x000c9000 0x000c9000 0x001000>, /* ap 88 */
1059 <0x000cc000 0x000cc000 0x001000>, /* ap 89 */
1060 <0x000cd000 0x000cd000 0x001000>, /* ap 90 */
1061 <0x000ca000 0x000ca000 0x001000>, /* ap 91 */
1062 <0x000cb000 0x000cb000 0x001000>, /* ap 92 */
1063 <0x46000000 0x46000000 0x400000>, /* l3 data port */
1064 <0x46400000 0x46400000 0x400000>; /* l3 data port */
1065
1066 target-module@8000 { /* 0x48008000, ap 6 10.0 */
1067 compatible = "ti,sysc";
1068 status = "disabled";
1069 #address-cells = <1>;
1070 #size-cells = <1>;
1071 ranges = <0x0 0x8000 0x1000>;
1072 };
1073
1074 target-module@14000 { /* 0x48014000, ap 18 58.0 */
1075 compatible = "ti,sysc";
1076 status = "disabled";
1077 #address-cells = <1>;
1078 #size-cells = <1>;
1079 ranges = <0x0 0x14000 0x1000>;
1080 };
1081
1082 target-module@16000 { /* 0x48016000, ap 8 3c.0 */
1083 compatible = "ti,sysc";
1084 status = "disabled";
1085 #address-cells = <1>;
1086 #size-cells = <1>;
1087 ranges = <0x0 0x16000 0x1000>;
1088 };
1089
1090 target-module@22000 { /* 0x48022000, ap 10 12.0 */
1091 compatible = "ti,sysc-omap2", "ti,sysc";
1092 reg = <0x22050 0x4>,
1093 <0x22054 0x4>,
1094 <0x22058 0x4>;
1095 reg-names = "rev", "sysc", "syss";
1096 ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
1097 SYSC_OMAP2_SOFTRESET |
1098 SYSC_OMAP2_AUTOIDLE)>;
1099 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1100 <SYSC_IDLE_NO>,
1101 <SYSC_IDLE_SMART>,
1102 <SYSC_IDLE_SMART_WKUP>;
1103 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
1104 clocks = <&l4ls_clkctrl AM3_L4LS_UART2_CLKCTRL 0>;
1105 clock-names = "fck";
1106 #address-cells = <1>;
1107 #size-cells = <1>;
1108 ranges = <0x0 0x22000 0x1000>;
1109
1110 uart1: serial@0 {
1111 compatible = "ti,am3352-uart", "ti,omap3-uart";
1112 clock-frequency = <48000000>;
1113 reg = <0x0 0x1000>;
1114 interrupts = <73>;
1115 status = "disabled";
1116 dmas = <&edma 28 0>, <&edma 29 0>;
1117 dma-names = "tx", "rx";
1118 };
1119 };
1120
1121 target-module@24000 { /* 0x48024000, ap 12 14.0 */
1122 compatible = "ti,sysc-omap2", "ti,sysc";
1123 reg = <0x24050 0x4>,
1124 <0x24054 0x4>,
1125 <0x24058 0x4>;
1126 reg-names = "rev", "sysc", "syss";
1127 ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
1128 SYSC_OMAP2_SOFTRESET |
1129 SYSC_OMAP2_AUTOIDLE)>;
1130 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1131 <SYSC_IDLE_NO>,
1132 <SYSC_IDLE_SMART>,
1133 <SYSC_IDLE_SMART_WKUP>;
1134 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
1135 clocks = <&l4ls_clkctrl AM3_L4LS_UART3_CLKCTRL 0>;
1136 clock-names = "fck";
1137 #address-cells = <1>;
1138 #size-cells = <1>;
1139 ranges = <0x0 0x24000 0x1000>;
1140
1141 uart2: serial@0 {
1142 compatible = "ti,am3352-uart", "ti,omap3-uart";
1143 clock-frequency = <48000000>;
1144 reg = <0x0 0x1000>;
1145 interrupts = <74>;
1146 status = "disabled";
1147 dmas = <&edma 30 0>, <&edma 31 0>;
1148 dma-names = "tx", "rx";
1149 };
1150 };
1151
1152 target-module@2a000 { /* 0x4802a000, ap 14 2a.0 */
1153 compatible = "ti,sysc-omap2", "ti,sysc";
1154 reg = <0x2a000 0x8>,
1155 <0x2a010 0x8>,
1156 <0x2a090 0x8>;
1157 reg-names = "rev", "sysc", "syss";
1158 ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
1159 SYSC_OMAP2_ENAWAKEUP |
1160 SYSC_OMAP2_SOFTRESET |
1161 SYSC_OMAP2_AUTOIDLE)>;
1162 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1163 <SYSC_IDLE_NO>,
1164 <SYSC_IDLE_SMART>,
1165 <SYSC_IDLE_SMART_WKUP>;
1166 ti,syss-mask = <1>;
1167 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
1168 clocks = <&l4ls_clkctrl AM3_L4LS_I2C2_CLKCTRL 0>;
1169 clock-names = "fck";
1170 #address-cells = <1>;
1171 #size-cells = <1>;
1172 ranges = <0x0 0x2a000 0x1000>;
1173
1174 i2c1: i2c@0 {
1175 compatible = "ti,omap4-i2c";
1176 #address-cells = <1>;
1177 #size-cells = <0>;
1178 reg = <0x0 0x1000>;
1179 interrupts = <71>;
1180 status = "disabled";
1181 };
1182 };
1183
1184 target-module@30000 { /* 0x48030000, ap 77 08.0 */
1185 compatible = "ti,sysc-omap2", "ti,sysc";
1186 reg = <0x30000 0x4>,
1187 <0x30110 0x4>,
1188 <0x30114 0x4>;
1189 reg-names = "rev", "sysc", "syss";
1190 ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
1191 SYSC_OMAP2_SOFTRESET |
1192 SYSC_OMAP2_AUTOIDLE)>;
1193 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1194 <SYSC_IDLE_NO>,
1195 <SYSC_IDLE_SMART>;
1196 ti,syss-mask = <1>;
1197 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
1198 clocks = <&l4ls_clkctrl AM3_L4LS_SPI0_CLKCTRL 0>;
1199 clock-names = "fck";
1200 #address-cells = <1>;
1201 #size-cells = <1>;
1202 ranges = <0x0 0x30000 0x1000>;
1203
1204 spi0: spi@0 {
1205 compatible = "ti,omap4-mcspi";
1206 #address-cells = <1>;
1207 #size-cells = <0>;
1208 reg = <0x0 0x400>;
1209 interrupts = <65>;
1210 ti,spi-num-cs = <2>;
1211 dmas = <&edma 16 0
1212 &edma 17 0
1213 &edma 18 0
1214 &edma 19 0>;
1215 dma-names = "tx0", "rx0", "tx1", "rx1";
1216 status = "disabled";
1217 };
1218 };
1219
1220 target-module@38000 { /* 0x48038000, ap 16 02.0 */
1221 compatible = "ti,sysc-omap4-simple", "ti,sysc";
1222 reg = <0x38000 0x4>,
1223 <0x38004 0x4>;
1224 reg-names = "rev", "sysc";
1225 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1226 <SYSC_IDLE_NO>,
1227 <SYSC_IDLE_SMART>;
1228 /* Domains (P, C): per_pwrdm, l3s_clkdm */
1229 clocks = <&l3s_clkctrl AM3_L3S_MCASP0_CLKCTRL 0>;
1230 clock-names = "fck";
1231 #address-cells = <1>;
1232 #size-cells = <1>;
1233 ranges = <0x0 0x38000 0x2000>,
1234 <0x46000000 0x46000000 0x400000>;
1235
1236 mcasp0: mcasp@0 {
1237 compatible = "ti,am33xx-mcasp-audio";
1238 reg = <0x0 0x2000>,
1239 <0x46000000 0x400000>;
1240 reg-names = "mpu", "dat";
1241 interrupts = <80>, <81>;
1242 interrupt-names = "tx", "rx";
1243 status = "disabled";
1244 dmas = <&edma 8 2>,
1245 <&edma 9 2>;
1246 dma-names = "tx", "rx";
1247 };
1248 };
1249
1250 target-module@3c000 { /* 0x4803c000, ap 20 32.0 */
1251 compatible = "ti,sysc-omap4-simple", "ti,sysc";
1252 reg = <0x3c000 0x4>,
1253 <0x3c004 0x4>;
1254 reg-names = "rev", "sysc";
1255 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1256 <SYSC_IDLE_NO>,
1257 <SYSC_IDLE_SMART>;
1258 /* Domains (P, C): per_pwrdm, l3s_clkdm */
1259 clocks = <&l3s_clkctrl AM3_L3S_MCASP1_CLKCTRL 0>;
1260 clock-names = "fck";
1261 #address-cells = <1>;
1262 #size-cells = <1>;
1263 ranges = <0x0 0x3c000 0x2000>,
1264 <0x46400000 0x46400000 0x400000>;
1265
1266 mcasp1: mcasp@0 {
1267 compatible = "ti,am33xx-mcasp-audio";
1268 reg = <0x0 0x2000>,
1269 <0x46400000 0x400000>;
1270 reg-names = "mpu", "dat";
1271 interrupts = <82>, <83>;
1272 interrupt-names = "tx", "rx";
1273 status = "disabled";
1274 dmas = <&edma 10 2>,
1275 <&edma 11 2>;
1276 dma-names = "tx", "rx";
1277 };
1278 };
1279
1280 timer2_target: target-module@40000 { /* 0x48040000, ap 22 1e.0 */
1281 compatible = "ti,sysc-omap4-timer", "ti,sysc";
1282 reg = <0x40000 0x4>,
1283 <0x40010 0x4>,
1284 <0x40014 0x4>;
1285 reg-names = "rev", "sysc", "syss";
1286 ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
1287 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1288 <SYSC_IDLE_NO>,
1289 <SYSC_IDLE_SMART>,
1290 <SYSC_IDLE_SMART_WKUP>;
1291 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
1292 clocks = <&l4ls_clkctrl AM3_L4LS_TIMER2_CLKCTRL 0>;
1293 clock-names = "fck";
1294 #address-cells = <1>;
1295 #size-cells = <1>;
1296 ranges = <0x0 0x40000 0x1000>;
1297
1298 timer2: timer@0 {
1299 compatible = "ti,am335x-timer";
1300 reg = <0x0 0x400>;
1301 interrupts = <68>;
1302 clocks = <&timer2_fck>;
1303 clock-names = "fck";
1304 };
1305 };
1306
1307 target-module@42000 { /* 0x48042000, ap 24 1c.0 */
1308 compatible = "ti,sysc-omap4-timer", "ti,sysc";
1309 reg = <0x42000 0x4>,
1310 <0x42010 0x4>,
1311 <0x42014 0x4>;
1312 reg-names = "rev", "sysc", "syss";
1313 ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
1314 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1315 <SYSC_IDLE_NO>,
1316 <SYSC_IDLE_SMART>,
1317 <SYSC_IDLE_SMART_WKUP>;
1318 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
1319 clocks = <&l4ls_clkctrl AM3_L4LS_TIMER3_CLKCTRL 0>;
1320 clock-names = "fck";
1321 #address-cells = <1>;
1322 #size-cells = <1>;
1323 ranges = <0x0 0x42000 0x1000>;
1324
1325 timer3: timer@0 {
1326 compatible = "ti,am335x-timer";
1327 reg = <0x0 0x400>;
1328 interrupts = <69>;
1329 };
1330 };
1331
1332 target-module@44000 { /* 0x48044000, ap 26 26.0 */
1333 compatible = "ti,sysc-omap4-timer", "ti,sysc";
1334 reg = <0x44000 0x4>,
1335 <0x44010 0x4>,
1336 <0x44014 0x4>;
1337 reg-names = "rev", "sysc", "syss";
1338 ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
1339 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1340 <SYSC_IDLE_NO>,
1341 <SYSC_IDLE_SMART>,
1342 <SYSC_IDLE_SMART_WKUP>;
1343 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
1344 clocks = <&l4ls_clkctrl AM3_L4LS_TIMER4_CLKCTRL 0>;
1345 clock-names = "fck";
1346 #address-cells = <1>;
1347 #size-cells = <1>;
1348 ranges = <0x0 0x44000 0x1000>;
1349
1350 timer4: timer@0 {
1351 compatible = "ti,am335x-timer";
1352 reg = <0x0 0x400>;
1353 interrupts = <92>;
1354 ti,timer-pwm;
1355 };
1356 };
1357
1358 target-module@46000 { /* 0x48046000, ap 28 28.0 */
1359 compatible = "ti,sysc-omap4-timer", "ti,sysc";
1360 reg = <0x46000 0x4>,
1361 <0x46010 0x4>,
1362 <0x46014 0x4>;
1363 reg-names = "rev", "sysc", "syss";
1364 ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
1365 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1366 <SYSC_IDLE_NO>,
1367 <SYSC_IDLE_SMART>,
1368 <SYSC_IDLE_SMART_WKUP>;
1369 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
1370 clocks = <&l4ls_clkctrl AM3_L4LS_TIMER5_CLKCTRL 0>;
1371 clock-names = "fck";
1372 #address-cells = <1>;
1373 #size-cells = <1>;
1374 ranges = <0x0 0x46000 0x1000>;
1375
1376 timer5: timer@0 {
1377 compatible = "ti,am335x-timer";
1378 reg = <0x0 0x400>;
1379 interrupts = <93>;
1380 ti,timer-pwm;
1381 };
1382 };
1383
1384 target-module@48000 { /* 0x48048000, ap 30 22.0 */
1385 compatible = "ti,sysc-omap4-timer", "ti,sysc";
1386 reg = <0x48000 0x4>,
1387 <0x48010 0x4>,
1388 <0x48014 0x4>;
1389 reg-names = "rev", "sysc", "syss";
1390 ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
1391 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1392 <SYSC_IDLE_NO>,
1393 <SYSC_IDLE_SMART>,
1394 <SYSC_IDLE_SMART_WKUP>;
1395 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
1396 clocks = <&l4ls_clkctrl AM3_L4LS_TIMER6_CLKCTRL 0>;
1397 clock-names = "fck";
1398 #address-cells = <1>;
1399 #size-cells = <1>;
1400 ranges = <0x0 0x48000 0x1000>;
1401
1402 timer6: timer@0 {
1403 compatible = "ti,am335x-timer";
1404 reg = <0x0 0x400>;
1405 interrupts = <94>;
1406 ti,timer-pwm;
1407 };
1408 };
1409
1410 target-module@4a000 { /* 0x4804a000, ap 85 60.0 */
1411 compatible = "ti,sysc-omap4-timer", "ti,sysc";
1412 reg = <0x4a000 0x4>,
1413 <0x4a010 0x4>,
1414 <0x4a014 0x4>;
1415 reg-names = "rev", "sysc", "syss";
1416 ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
1417 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1418 <SYSC_IDLE_NO>,
1419 <SYSC_IDLE_SMART>,
1420 <SYSC_IDLE_SMART_WKUP>;
1421 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
1422 clocks = <&l4ls_clkctrl AM3_L4LS_TIMER7_CLKCTRL 0>;
1423 clock-names = "fck";
1424 #address-cells = <1>;
1425 #size-cells = <1>;
1426 ranges = <0x0 0x4a000 0x1000>;
1427
1428 timer7: timer@0 {
1429 compatible = "ti,am335x-timer";
1430 reg = <0x0 0x400>;
1431 interrupts = <95>;
1432 ti,timer-pwm;
1433 };
1434 };
1435
1436 target-module@4c000 { /* 0x4804c000, ap 32 36.0 */
1437 compatible = "ti,sysc-omap2", "ti,sysc";
1438 reg = <0x4c000 0x4>,
1439 <0x4c010 0x4>,
1440 <0x4c114 0x4>;
1441 reg-names = "rev", "sysc", "syss";
1442 ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
1443 SYSC_OMAP2_SOFTRESET |
1444 SYSC_OMAP2_AUTOIDLE)>;
1445 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1446 <SYSC_IDLE_NO>,
1447 <SYSC_IDLE_SMART>,
1448 <SYSC_IDLE_SMART_WKUP>;
1449 ti,syss-mask = <1>;
1450 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
1451 clocks = <&l4ls_clkctrl AM3_L4LS_GPIO2_CLKCTRL 0>,
1452 <&l4ls_clkctrl AM3_L4LS_GPIO2_CLKCTRL 18>;
1453 clock-names = "fck", "dbclk";
1454 #address-cells = <1>;
1455 #size-cells = <1>;
1456 ranges = <0x0 0x4c000 0x1000>;
1457
1458 gpio1: gpio@0 {
1459 compatible = "ti,omap4-gpio";
1460 gpio-ranges = <&am33xx_pinmux 0 0 8>,
1461 <&am33xx_pinmux 8 90 4>,
1462 <&am33xx_pinmux 12 12 16>,
1463 <&am33xx_pinmux 28 30 4>;
1464 gpio-controller;
1465 #gpio-cells = <2>;
1466 interrupt-controller;
1467 #interrupt-cells = <2>;
1468 reg = <0x0 0x1000>;
1469 interrupts = <98>;
1470 };
1471 };
1472
1473 target-module@50000 { /* 0x48050000, ap 34 2c.0 */
1474 compatible = "ti,sysc";
1475 status = "disabled";
1476 #address-cells = <1>;
1477 #size-cells = <1>;
1478 ranges = <0x0 0x50000 0x2000>;
1479 };
1480
1481 target-module@60000 { /* 0x48060000, ap 36 0c.0 */
1482 compatible = "ti,sysc-omap2", "ti,sysc";
1483 reg = <0x602fc 0x4>,
1484 <0x60110 0x4>,
1485 <0x60114 0x4>;
1486 reg-names = "rev", "sysc", "syss";
1487 ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
1488 SYSC_OMAP2_ENAWAKEUP |
1489 SYSC_OMAP2_SOFTRESET |
1490 SYSC_OMAP2_AUTOIDLE)>;
1491 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1492 <SYSC_IDLE_NO>,
1493 <SYSC_IDLE_SMART>;
1494 ti,syss-mask = <1>;
1495 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
1496 clocks = <&l4ls_clkctrl AM3_L4LS_MMC1_CLKCTRL 0>;
1497 clock-names = "fck";
1498 #address-cells = <1>;
1499 #size-cells = <1>;
1500 ranges = <0x0 0x60000 0x1000>;
1501
1502 mmc1: mmc@0 {
1503 compatible = "ti,am335-sdhci";
1504 ti,needs-special-reset;
1505 dmas = <&edma 24 0>, <&edma 25 0>;
1506 dma-names = "tx", "rx";
1507 interrupts = <64>;
1508 reg = <0x0 0x1000>;
1509 status = "disabled";
1510 };
1511 };
1512
1513 target-module@80000 { /* 0x48080000, ap 38 18.0 */
1514 compatible = "ti,sysc-omap2", "ti,sysc";
1515 reg = <0x80000 0x4>,
1516 <0x80010 0x4>,
1517 <0x80014 0x4>;
1518 reg-names = "rev", "sysc", "syss";
1519 ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
1520 SYSC_OMAP2_SOFTRESET |
1521 SYSC_OMAP2_AUTOIDLE)>;
1522 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1523 <SYSC_IDLE_NO>,
1524 <SYSC_IDLE_SMART>;
1525 ti,syss-mask = <1>;
1526 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
1527 clocks = <&l4ls_clkctrl AM3_L4LS_ELM_CLKCTRL 0>;
1528 clock-names = "fck";
1529 #address-cells = <1>;
1530 #size-cells = <1>;
1531 ranges = <0x0 0x80000 0x10000>;
1532
1533 elm: elm@0 {
1534 compatible = "ti,am3352-elm";
1535 reg = <0x0 0x2000>;
1536 interrupts = <4>;
1537 status = "disabled";
1538 };
1539 };
1540
1541 target-module@a0000 { /* 0x480a0000, ap 40 5e.0 */
1542 compatible = "ti,sysc";
1543 status = "disabled";
1544 #address-cells = <1>;
1545 #size-cells = <1>;
1546 ranges = <0x0 0xa0000 0x10000>;
1547 };
1548
1549 target-module@c8000 { /* 0x480c8000, ap 87 06.0 */
1550 compatible = "ti,sysc-omap4", "ti,sysc";
1551 reg = <0xc8000 0x4>,
1552 <0xc8010 0x4>;
1553 reg-names = "rev", "sysc";
1554 ti,sysc-mask = <SYSC_OMAP4_SOFTRESET>;
1555 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1556 <SYSC_IDLE_NO>,
1557 <SYSC_IDLE_SMART>;
1558 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
1559 clocks = <&l4ls_clkctrl AM3_L4LS_MAILBOX_CLKCTRL 0>;
1560 clock-names = "fck";
1561 #address-cells = <1>;
1562 #size-cells = <1>;
1563 ranges = <0x0 0xc8000 0x1000>;
1564
1565 mailbox: mailbox@0 {
1566 compatible = "ti,omap4-mailbox";
1567 reg = <0x0 0x200>;
1568 interrupts = <77>;
1569 #mbox-cells = <1>;
1570 ti,mbox-num-users = <4>;
1571 ti,mbox-num-fifos = <8>;
1572 mbox_wkupm3: mbox-wkup-m3 {
1573 ti,mbox-send-noirq;
1574 ti,mbox-tx = <0 0 0>;
1575 ti,mbox-rx = <0 0 3>;
1576 };
1577 };
1578 };
1579
1580 target-module@ca000 { /* 0x480ca000, ap 91 40.0 */
1581 compatible = "ti,sysc-omap2", "ti,sysc";
1582 reg = <0xca000 0x4>,
1583 <0xca010 0x4>,
1584 <0xca014 0x4>;
1585 reg-names = "rev", "sysc", "syss";
1586 ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
1587 SYSC_OMAP2_ENAWAKEUP |
1588 SYSC_OMAP2_SOFTRESET |
1589 SYSC_OMAP2_AUTOIDLE)>;
1590 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1591 <SYSC_IDLE_NO>,
1592 <SYSC_IDLE_SMART>;
1593 ti,syss-mask = <1>;
1594 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
1595 clocks = <&l4ls_clkctrl AM3_L4LS_SPINLOCK_CLKCTRL 0>;
1596 clock-names = "fck";
1597 #address-cells = <1>;
1598 #size-cells = <1>;
1599 ranges = <0x0 0xca000 0x1000>;
1600
1601 hwspinlock: spinlock@0 {
1602 compatible = "ti,omap4-hwspinlock";
1603 reg = <0x0 0x1000>;
1604 #hwlock-cells = <1>;
1605 };
1606 };
1607
1608 target-module@cc000 { /* 0x480cc000, ap 89 0e.0 */
1609 compatible = "ti,sysc";
1610 status = "disabled";
1611 #address-cells = <1>;
1612 #size-cells = <1>;
1613 ranges = <0x0 0xcc000 0x1000>;
1614 };
1615 };
1616
1617 segment@100000 { /* 0x48100000 */
1618 compatible = "simple-pm-bus";
1619 #address-cells = <1>;
1620 #size-cells = <1>;
1621 ranges = <0x0008c000 0x0018c000 0x001000>, /* ap 42 */
1622 <0x0008d000 0x0018d000 0x001000>, /* ap 43 */
1623 <0x0008e000 0x0018e000 0x001000>, /* ap 44 */
1624 <0x0008f000 0x0018f000 0x001000>, /* ap 45 */
1625 <0x0009c000 0x0019c000 0x001000>, /* ap 46 */
1626 <0x0009d000 0x0019d000 0x001000>, /* ap 47 */
1627 <0x000a6000 0x001a6000 0x001000>, /* ap 48 */
1628 <0x000a7000 0x001a7000 0x001000>, /* ap 49 */
1629 <0x000a8000 0x001a8000 0x001000>, /* ap 50 */
1630 <0x000a9000 0x001a9000 0x001000>, /* ap 51 */
1631 <0x000aa000 0x001aa000 0x001000>, /* ap 52 */
1632 <0x000ab000 0x001ab000 0x001000>, /* ap 53 */
1633 <0x000ac000 0x001ac000 0x001000>, /* ap 54 */
1634 <0x000ad000 0x001ad000 0x001000>, /* ap 55 */
1635 <0x000ae000 0x001ae000 0x001000>, /* ap 56 */
1636 <0x000af000 0x001af000 0x001000>, /* ap 57 */
1637 <0x000b0000 0x001b0000 0x010000>, /* ap 58 */
1638 <0x000c0000 0x001c0000 0x001000>, /* ap 59 */
1639 <0x000cc000 0x001cc000 0x002000>, /* ap 60 */
1640 <0x000ce000 0x001ce000 0x002000>, /* ap 61 */
1641 <0x000d0000 0x001d0000 0x002000>, /* ap 62 */
1642 <0x000d2000 0x001d2000 0x002000>, /* ap 63 */
1643 <0x000d8000 0x001d8000 0x001000>, /* ap 64 */
1644 <0x000d9000 0x001d9000 0x001000>, /* ap 65 */
1645 <0x000a0000 0x001a0000 0x001000>, /* ap 79 */
1646 <0x000a1000 0x001a1000 0x001000>, /* ap 80 */
1647 <0x000a2000 0x001a2000 0x001000>, /* ap 81 */
1648 <0x000a3000 0x001a3000 0x001000>, /* ap 82 */
1649 <0x000a4000 0x001a4000 0x001000>, /* ap 83 */
1650 <0x000a5000 0x001a5000 0x001000>; /* ap 84 */
1651
1652 target-module@8c000 { /* 0x4818c000, ap 42 04.0 */
1653 compatible = "ti,sysc";
1654 status = "disabled";
1655 #address-cells = <1>;
1656 #size-cells = <1>;
1657 ranges = <0x0 0x8c000 0x1000>;
1658 };
1659
1660 target-module@8e000 { /* 0x4818e000, ap 44 0a.0 */
1661 compatible = "ti,sysc";
1662 status = "disabled";
1663 #address-cells = <1>;
1664 #size-cells = <1>;
1665 ranges = <0x0 0x8e000 0x1000>;
1666 };
1667
1668 target-module@9c000 { /* 0x4819c000, ap 46 5a.0 */
1669 compatible = "ti,sysc-omap2", "ti,sysc";
1670 reg = <0x9c000 0x8>,
1671 <0x9c010 0x8>,
1672 <0x9c090 0x8>;
1673 reg-names = "rev", "sysc", "syss";
1674 ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
1675 SYSC_OMAP2_ENAWAKEUP |
1676 SYSC_OMAP2_SOFTRESET |
1677 SYSC_OMAP2_AUTOIDLE)>;
1678 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1679 <SYSC_IDLE_NO>,
1680 <SYSC_IDLE_SMART>,
1681 <SYSC_IDLE_SMART_WKUP>;
1682 ti,syss-mask = <1>;
1683 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
1684 clocks = <&l4ls_clkctrl AM3_L4LS_I2C3_CLKCTRL 0>;
1685 clock-names = "fck";
1686 #address-cells = <1>;
1687 #size-cells = <1>;
1688 ranges = <0x0 0x9c000 0x1000>;
1689
1690 i2c2: i2c@0 {
1691 compatible = "ti,omap4-i2c";
1692 #address-cells = <1>;
1693 #size-cells = <0>;
1694 reg = <0x0 0x1000>;
1695 interrupts = <30>;
1696 status = "disabled";
1697 };
1698 };
1699
1700 target-module@a0000 { /* 0x481a0000, ap 79 24.0 */
1701 compatible = "ti,sysc-omap2", "ti,sysc";
1702 reg = <0xa0000 0x4>,
1703 <0xa0110 0x4>,
1704 <0xa0114 0x4>;
1705 reg-names = "rev", "sysc", "syss";
1706 ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
1707 SYSC_OMAP2_SOFTRESET |
1708 SYSC_OMAP2_AUTOIDLE)>;
1709 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1710 <SYSC_IDLE_NO>,
1711 <SYSC_IDLE_SMART>;
1712 ti,syss-mask = <1>;
1713 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
1714 clocks = <&l4ls_clkctrl AM3_L4LS_SPI1_CLKCTRL 0>;
1715 clock-names = "fck";
1716 #address-cells = <1>;
1717 #size-cells = <1>;
1718 ranges = <0x0 0xa0000 0x1000>;
1719
1720 spi1: spi@0 {
1721 compatible = "ti,omap4-mcspi";
1722 #address-cells = <1>;
1723 #size-cells = <0>;
1724 reg = <0x0 0x400>;
1725 interrupts = <125>;
1726 ti,spi-num-cs = <2>;
1727 dmas = <&edma 42 0
1728 &edma 43 0
1729 &edma 44 0
1730 &edma 45 0>;
1731 dma-names = "tx0", "rx0", "tx1", "rx1";
1732 status = "disabled";
1733 };
1734 };
1735
1736 target-module@a2000 { /* 0x481a2000, ap 81 2e.0 */
1737 compatible = "ti,sysc";
1738 status = "disabled";
1739 #address-cells = <1>;
1740 #size-cells = <1>;
1741 ranges = <0x0 0xa2000 0x1000>;
1742 };
1743
1744 target-module@a4000 { /* 0x481a4000, ap 83 30.0 */
1745 compatible = "ti,sysc";
1746 status = "disabled";
1747 #address-cells = <1>;
1748 #size-cells = <1>;
1749 ranges = <0x0 0xa4000 0x1000>;
1750 };
1751
1752 target-module@a6000 { /* 0x481a6000, ap 48 16.0 */
1753 compatible = "ti,sysc-omap2", "ti,sysc";
1754 reg = <0xa6050 0x4>,
1755 <0xa6054 0x4>,
1756 <0xa6058 0x4>;
1757 reg-names = "rev", "sysc", "syss";
1758 ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
1759 SYSC_OMAP2_SOFTRESET |
1760 SYSC_OMAP2_AUTOIDLE)>;
1761 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1762 <SYSC_IDLE_NO>,
1763 <SYSC_IDLE_SMART>,
1764 <SYSC_IDLE_SMART_WKUP>;
1765 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
1766 clocks = <&l4ls_clkctrl AM3_L4LS_UART4_CLKCTRL 0>;
1767 clock-names = "fck";
1768 #address-cells = <1>;
1769 #size-cells = <1>;
1770 ranges = <0x0 0xa6000 0x1000>;
1771
1772 uart3: serial@0 {
1773 compatible = "ti,am3352-uart", "ti,omap3-uart";
1774 clock-frequency = <48000000>;
1775 reg = <0x0 0x1000>;
1776 interrupts = <44>;
1777 status = "disabled";
1778 };
1779 };
1780
1781 target-module@a8000 { /* 0x481a8000, ap 50 20.0 */
1782 compatible = "ti,sysc-omap2", "ti,sysc";
1783 reg = <0xa8050 0x4>,
1784 <0xa8054 0x4>,
1785 <0xa8058 0x4>;
1786 reg-names = "rev", "sysc", "syss";
1787 ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
1788 SYSC_OMAP2_SOFTRESET |
1789 SYSC_OMAP2_AUTOIDLE)>;
1790 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1791 <SYSC_IDLE_NO>,
1792 <SYSC_IDLE_SMART>,
1793 <SYSC_IDLE_SMART_WKUP>;
1794 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
1795 clocks = <&l4ls_clkctrl AM3_L4LS_UART5_CLKCTRL 0>;
1796 clock-names = "fck";
1797 #address-cells = <1>;
1798 #size-cells = <1>;
1799 ranges = <0x0 0xa8000 0x1000>;
1800
1801 uart4: serial@0 {
1802 compatible = "ti,am3352-uart", "ti,omap3-uart";
1803 clock-frequency = <48000000>;
1804 reg = <0x0 0x1000>;
1805 interrupts = <45>;
1806 status = "disabled";
1807 };
1808 };
1809
1810 target-module@aa000 { /* 0x481aa000, ap 52 1a.0 */
1811 compatible = "ti,sysc-omap2", "ti,sysc";
1812 reg = <0xaa050 0x4>,
1813 <0xaa054 0x4>,
1814 <0xaa058 0x4>;
1815 reg-names = "rev", "sysc", "syss";
1816 ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
1817 SYSC_OMAP2_SOFTRESET |
1818 SYSC_OMAP2_AUTOIDLE)>;
1819 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1820 <SYSC_IDLE_NO>,
1821 <SYSC_IDLE_SMART>,
1822 <SYSC_IDLE_SMART_WKUP>;
1823 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
1824 clocks = <&l4ls_clkctrl AM3_L4LS_UART6_CLKCTRL 0>;
1825 clock-names = "fck";
1826 #address-cells = <1>;
1827 #size-cells = <1>;
1828 ranges = <0x0 0xaa000 0x1000>;
1829
1830 uart5: serial@0 {
1831 compatible = "ti,am3352-uart", "ti,omap3-uart";
1832 clock-frequency = <48000000>;
1833 reg = <0x0 0x1000>;
1834 interrupts = <46>;
1835 status = "disabled";
1836 };
1837 };
1838
1839 target-module@ac000 { /* 0x481ac000, ap 54 38.0 */
1840 compatible = "ti,sysc-omap2", "ti,sysc";
1841 reg = <0xac000 0x4>,
1842 <0xac010 0x4>,
1843 <0xac114 0x4>;
1844 reg-names = "rev", "sysc", "syss";
1845 ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
1846 SYSC_OMAP2_SOFTRESET |
1847 SYSC_OMAP2_AUTOIDLE)>;
1848 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1849 <SYSC_IDLE_NO>,
1850 <SYSC_IDLE_SMART>,
1851 <SYSC_IDLE_SMART_WKUP>;
1852 ti,syss-mask = <1>;
1853 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
1854 clocks = <&l4ls_clkctrl AM3_L4LS_GPIO3_CLKCTRL 0>,
1855 <&l4ls_clkctrl AM3_L4LS_GPIO3_CLKCTRL 18>;
1856 clock-names = "fck", "dbclk";
1857 #address-cells = <1>;
1858 #size-cells = <1>;
1859 ranges = <0x0 0xac000 0x1000>;
1860
1861 gpio2: gpio@0 {
1862 compatible = "ti,omap4-gpio";
1863 gpio-ranges = <&am33xx_pinmux 0 34 18>,
1864 <&am33xx_pinmux 18 77 4>,
1865 <&am33xx_pinmux 22 56 10>;
1866 gpio-controller;
1867 #gpio-cells = <2>;
1868 interrupt-controller;
1869 #interrupt-cells = <2>;
1870 reg = <0x0 0x1000>;
1871 interrupts = <32>;
1872 };
1873 };
1874
1875 gpio3_target: target-module@ae000 { /* 0x481ae000, ap 56 3a.0 */
1876 compatible = "ti,sysc-omap2", "ti,sysc";
1877 reg = <0xae000 0x4>,
1878 <0xae010 0x4>,
1879 <0xae114 0x4>;
1880 reg-names = "rev", "sysc", "syss";
1881 ti,sysc-mask = <(SYSC_OMAP2_ENAWAKEUP |
1882 SYSC_OMAP2_SOFTRESET |
1883 SYSC_OMAP2_AUTOIDLE)>;
1884 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1885 <SYSC_IDLE_NO>,
1886 <SYSC_IDLE_SMART>,
1887 <SYSC_IDLE_SMART_WKUP>;
1888 ti,syss-mask = <1>;
1889 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
1890 clocks = <&l4ls_clkctrl AM3_L4LS_GPIO4_CLKCTRL 0>,
1891 <&l4ls_clkctrl AM3_L4LS_GPIO4_CLKCTRL 18>;
1892 clock-names = "fck", "dbclk";
1893 #address-cells = <1>;
1894 #size-cells = <1>;
1895 ranges = <0x0 0xae000 0x1000>;
1896
1897 gpio3: gpio@0 {
1898 compatible = "ti,omap4-gpio";
1899 gpio-ranges = <&am33xx_pinmux 0 66 5>,
1900 <&am33xx_pinmux 5 98 2>,
1901 <&am33xx_pinmux 7 75 2>,
1902 <&am33xx_pinmux 13 141 1>,
1903 <&am33xx_pinmux 14 100 8>;
1904 gpio-controller;
1905 #gpio-cells = <2>;
1906 interrupt-controller;
1907 #interrupt-cells = <2>;
1908 reg = <0x0 0x1000>;
1909 interrupts = <62>;
1910 };
1911 };
1912
1913 target-module@b0000 { /* 0x481b0000, ap 58 50.0 */
1914 compatible = "ti,sysc";
1915 status = "disabled";
1916 #address-cells = <1>;
1917 #size-cells = <1>;
1918 ranges = <0x0 0xb0000 0x10000>;
1919 };
1920
1921 target-module@cc000 { /* 0x481cc000, ap 60 46.0 */
1922 compatible = "ti,sysc-omap4", "ti,sysc";
1923 reg = <0xcc020 0x4>;
1924 reg-names = "rev";
1925 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
1926 clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN0_CLKCTRL 0>,
1927 <&dcan0_fck>;
1928 clock-names = "fck", "osc";
1929 #address-cells = <1>;
1930 #size-cells = <1>;
1931 ranges = <0x0 0xcc000 0x2000>;
1932
1933 dcan0: can@0 {
1934 compatible = "ti,am3352-d_can";
1935 reg = <0x0 0x2000>;
1936 clocks = <&dcan0_fck>;
1937 clock-names = "fck";
1938 syscon-raminit = <&scm_conf 0x644 0>;
1939 interrupts = <52>;
1940 status = "disabled";
1941 };
1942 };
1943
1944 target-module@d0000 { /* 0x481d0000, ap 62 42.0 */
1945 compatible = "ti,sysc-omap4", "ti,sysc";
1946 reg = <0xd0020 0x4>;
1947 reg-names = "rev";
1948 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
1949 clocks = <&l4ls_clkctrl AM3_L4LS_D_CAN1_CLKCTRL 0>,
1950 <&dcan1_fck>;
1951 clock-names = "fck", "osc";
1952 #address-cells = <1>;
1953 #size-cells = <1>;
1954 ranges = <0x0 0xd0000 0x2000>;
1955
1956 dcan1: can@0 {
1957 compatible = "ti,am3352-d_can";
1958 reg = <0x0 0x2000>;
1959 clocks = <&dcan1_fck>;
1960 clock-names = "fck";
1961 syscon-raminit = <&scm_conf 0x644 1>;
1962 interrupts = <55>;
1963 status = "disabled";
1964 };
1965 };
1966
1967 target-module@d8000 { /* 0x481d8000, ap 64 66.0 */
1968 compatible = "ti,sysc-omap2", "ti,sysc";
1969 reg = <0xd82fc 0x4>,
1970 <0xd8110 0x4>,
1971 <0xd8114 0x4>;
1972 reg-names = "rev", "sysc", "syss";
1973 ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
1974 SYSC_OMAP2_ENAWAKEUP |
1975 SYSC_OMAP2_SOFTRESET |
1976 SYSC_OMAP2_AUTOIDLE)>;
1977 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1978 <SYSC_IDLE_NO>,
1979 <SYSC_IDLE_SMART>;
1980 ti,syss-mask = <1>;
1981 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
1982 clocks = <&l4ls_clkctrl AM3_L4LS_MMC2_CLKCTRL 0>;
1983 clock-names = "fck";
1984 #address-cells = <1>;
1985 #size-cells = <1>;
1986 ranges = <0x0 0xd8000 0x1000>;
1987
1988 mmc2: mmc@0 {
1989 compatible = "ti,am335-sdhci";
1990 ti,needs-special-reset;
1991 dmas = <&edma 2 0
1992 &edma 3 0>;
1993 dma-names = "tx", "rx";
1994 interrupts = <28>;
1995 reg = <0x0 0x1000>;
1996 status = "disabled";
1997 };
1998 };
1999 };
2000
2001 segment@200000 { /* 0x48200000 */
2002 compatible = "simple-pm-bus";
2003 #address-cells = <1>;
2004 #size-cells = <1>;
2005 ranges = <0x00000000 0x00200000 0x010000>;
2006
2007 target-module@0 {
2008 compatible = "ti,sysc-omap4-simple", "ti,sysc";
2009 power-domains = <&prm_mpu>;
2010 clocks = <&mpu_clkctrl AM3_MPU_MPU_CLKCTRL 0>;
2011 clock-names = "fck";
2012 ti,no-idle;
2013 #address-cells = <1>;
2014 #size-cells = <1>;
2015 ranges = <0 0 0x10000>;
2016
2017 mpu@0 {
2018 compatible = "ti,omap3-mpu";
2019 pm-sram = <&pm_sram_code
2020 &pm_sram_data>;
2021 };
2022 };
2023 };
2024
2025 segment@300000 { /* 0x48300000 */
2026 compatible = "simple-pm-bus";
2027 #address-cells = <1>;
2028 #size-cells = <1>;
2029 ranges = <0x00000000 0x00300000 0x001000>, /* ap 66 */
2030 <0x00001000 0x00301000 0x001000>, /* ap 67 */
2031 <0x00002000 0x00302000 0x001000>, /* ap 68 */
2032 <0x00003000 0x00303000 0x001000>, /* ap 69 */
2033 <0x00004000 0x00304000 0x001000>, /* ap 70 */
2034 <0x00005000 0x00305000 0x001000>, /* ap 71 */
2035 <0x0000e000 0x0030e000 0x001000>, /* ap 72 */
2036 <0x0000f000 0x0030f000 0x001000>, /* ap 73 */
2037 <0x00018000 0x00318000 0x004000>, /* ap 74 */
2038 <0x0001c000 0x0031c000 0x001000>, /* ap 75 */
2039 <0x00010000 0x00310000 0x002000>, /* ap 76 */
2040 <0x00012000 0x00312000 0x001000>, /* ap 93 */
2041 <0x00015000 0x00315000 0x001000>, /* ap 94 */
2042 <0x00016000 0x00316000 0x001000>, /* ap 95 */
2043 <0x00017000 0x00317000 0x001000>, /* ap 96 */
2044 <0x00013000 0x00313000 0x001000>, /* ap 97 */
2045 <0x00014000 0x00314000 0x001000>, /* ap 98 */
2046 <0x00020000 0x00320000 0x001000>, /* ap 99 */
2047 <0x00021000 0x00321000 0x001000>, /* ap 100 */
2048 <0x00022000 0x00322000 0x001000>, /* ap 101 */
2049 <0x00023000 0x00323000 0x001000>, /* ap 102 */
2050 <0x00024000 0x00324000 0x001000>, /* ap 103 */
2051 <0x00025000 0x00325000 0x001000>; /* ap 104 */
2052
2053 target-module@0 { /* 0x48300000, ap 66 48.0 */
2054 compatible = "ti,sysc-omap4", "ti,sysc";
2055 reg = <0x0 0x4>,
2056 <0x4 0x4>;
2057 reg-names = "rev", "sysc";
2058 ti,sysc-midle = <SYSC_IDLE_FORCE>,
2059 <SYSC_IDLE_NO>,
2060 <SYSC_IDLE_SMART>,
2061 <SYSC_IDLE_SMART_WKUP>;
2062 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
2063 <SYSC_IDLE_NO>,
2064 <SYSC_IDLE_SMART>,
2065 <SYSC_IDLE_SMART_WKUP>;
2066 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
2067 clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS0_CLKCTRL 0>;
2068 clock-names = "fck";
2069 #address-cells = <1>;
2070 #size-cells = <1>;
2071 ranges = <0x0 0x0 0x1000>;
2072
2073 epwmss0: epwmss@0 {
2074 compatible = "ti,am33xx-pwmss";
2075 reg = <0x0 0x10>;
2076 #address-cells = <1>;
2077 #size-cells = <1>;
2078 status = "disabled";
2079 ranges = <0 0 0x1000>;
2080
2081 ecap0: pwm@100 {
2082 compatible = "ti,am3352-ecap";
2083 #pwm-cells = <3>;
2084 reg = <0x100 0x80>;
2085 clocks = <&l4ls_gclk>;
2086 clock-names = "fck";
2087 status = "disabled";
2088 };
2089
2090 eqep0: counter@180 {
2091 compatible = "ti,am3352-eqep";
2092 reg = <0x180 0x80>;
2093 clocks = <&l4ls_gclk>;
2094 clock-names = "sysclkout";
2095 interrupts = <79>;
2096 status = "disabled";
2097 };
2098
2099 ehrpwm0: pwm@200 {
2100 compatible = "ti,am3352-ehrpwm";
2101 #pwm-cells = <3>;
2102 reg = <0x200 0x80>;
2103 clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
2104 clock-names = "tbclk", "fck";
2105 status = "disabled";
2106 };
2107 };
2108 };
2109
2110 target-module@2000 { /* 0x48302000, ap 68 52.0 */
2111 compatible = "ti,sysc-omap4", "ti,sysc";
2112 reg = <0x2000 0x4>,
2113 <0x2004 0x4>;
2114 reg-names = "rev", "sysc";
2115 ti,sysc-midle = <SYSC_IDLE_FORCE>,
2116 <SYSC_IDLE_NO>,
2117 <SYSC_IDLE_SMART>,
2118 <SYSC_IDLE_SMART_WKUP>;
2119 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
2120 <SYSC_IDLE_NO>,
2121 <SYSC_IDLE_SMART>,
2122 <SYSC_IDLE_SMART_WKUP>;
2123 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
2124 clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS1_CLKCTRL 0>;
2125 clock-names = "fck";
2126 #address-cells = <1>;
2127 #size-cells = <1>;
2128 ranges = <0x0 0x2000 0x1000>;
2129
2130 epwmss1: epwmss@0 {
2131 compatible = "ti,am33xx-pwmss";
2132 reg = <0x0 0x10>;
2133 #address-cells = <1>;
2134 #size-cells = <1>;
2135 status = "disabled";
2136 ranges = <0 0 0x1000>;
2137
2138 ecap1: pwm@100 {
2139 compatible = "ti,am3352-ecap";
2140 #pwm-cells = <3>;
2141 reg = <0x100 0x80>;
2142 clocks = <&l4ls_gclk>;
2143 clock-names = "fck";
2144 status = "disabled";
2145 };
2146
2147 eqep1: counter@180 {
2148 compatible = "ti,am3352-eqep";
2149 reg = <0x180 0x80>;
2150 clocks = <&l4ls_gclk>;
2151 clock-names = "sysclkout";
2152 interrupts = <88>;
2153 status = "disabled";
2154 };
2155
2156 ehrpwm1: pwm@200 {
2157 compatible = "ti,am3352-ehrpwm";
2158 #pwm-cells = <3>;
2159 reg = <0x200 0x80>;
2160 clocks = <&ehrpwm1_tbclk>, <&l4ls_gclk>;
2161 clock-names = "tbclk", "fck";
2162 status = "disabled";
2163 };
2164 };
2165 };
2166
2167 target-module@4000 { /* 0x48304000, ap 70 44.0 */
2168 compatible = "ti,sysc-omap4", "ti,sysc";
2169 reg = <0x4000 0x4>,
2170 <0x4004 0x4>;
2171 reg-names = "rev", "sysc";
2172 ti,sysc-midle = <SYSC_IDLE_FORCE>,
2173 <SYSC_IDLE_NO>,
2174 <SYSC_IDLE_SMART>,
2175 <SYSC_IDLE_SMART_WKUP>;
2176 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
2177 <SYSC_IDLE_NO>,
2178 <SYSC_IDLE_SMART>,
2179 <SYSC_IDLE_SMART_WKUP>;
2180 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
2181 clocks = <&l4ls_clkctrl AM3_L4LS_EPWMSS2_CLKCTRL 0>;
2182 clock-names = "fck";
2183 #address-cells = <1>;
2184 #size-cells = <1>;
2185 ranges = <0x0 0x4000 0x1000>;
2186
2187 epwmss2: epwmss@0 {
2188 compatible = "ti,am33xx-pwmss";
2189 reg = <0x0 0x10>;
2190 #address-cells = <1>;
2191 #size-cells = <1>;
2192 status = "disabled";
2193 ranges = <0 0 0x1000>;
2194
2195 ecap2: pwm@100 {
2196 compatible = "ti,am3352-ecap";
2197 #pwm-cells = <3>;
2198 reg = <0x100 0x80>;
2199 clocks = <&l4ls_gclk>;
2200 clock-names = "fck";
2201 status = "disabled";
2202 };
2203
2204 eqep2: counter@180 {
2205 compatible = "ti,am3352-eqep";
2206 reg = <0x180 0x80>;
2207 clocks = <&l4ls_gclk>;
2208 clock-names = "sysclkout";
2209 interrupts = <89>;
2210 status = "disabled";
2211 };
2212
2213 ehrpwm2: pwm@200 {
2214 compatible = "ti,am3352-ehrpwm";
2215 #pwm-cells = <3>;
2216 reg = <0x200 0x80>;
2217 clocks = <&ehrpwm2_tbclk>, <&l4ls_gclk>;
2218 clock-names = "tbclk", "fck";
2219 status = "disabled";
2220 };
2221 };
2222 };
2223
2224 target-module@e000 { /* 0x4830e000, ap 72 4a.0 */
2225 compatible = "ti,sysc-omap4", "ti,sysc";
2226 reg = <0xe000 0x4>,
2227 <0xe054 0x4>;
2228 reg-names = "rev", "sysc";
2229 ti,sysc-midle = <SYSC_IDLE_FORCE>,
2230 <SYSC_IDLE_NO>,
2231 <SYSC_IDLE_SMART>;
2232 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
2233 <SYSC_IDLE_NO>,
2234 <SYSC_IDLE_SMART>;
2235 /* Domains (P, C): per_pwrdm, lcdc_clkdm */
2236 clocks = <&lcdc_clkctrl AM3_LCDC_LCDC_CLKCTRL 0>;
2237 clock-names = "fck";
2238 #address-cells = <1>;
2239 #size-cells = <1>;
2240 ranges = <0x0 0xe000 0x1000>;
2241
2242 lcdc: lcdc@0 {
2243 compatible = "ti,am33xx-tilcdc";
2244 reg = <0x0 0x1000>;
2245 interrupts = <36>;
2246 status = "disabled";
2247 };
2248 };
2249
2250 target-module@10000 { /* 0x48310000, ap 76 4e.1 */
2251 compatible = "ti,sysc-omap2", "ti,sysc";
2252 reg = <0x11fe0 0x4>,
2253 <0x11fe4 0x4>;
2254 reg-names = "rev", "sysc";
2255 ti,sysc-mask = <SYSC_OMAP2_AUTOIDLE>;
2256 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
2257 <SYSC_IDLE_NO>;
2258 /* Domains (P, C): per_pwrdm, l4ls_clkdm */
2259 clocks = <&l4ls_clkctrl AM3_L4LS_RNG_CLKCTRL 0>;
2260 clock-names = "fck";
2261 #address-cells = <1>;
2262 #size-cells = <1>;
2263 ranges = <0x0 0x10000 0x2000>;
2264
2265 rng: rng@0 {
2266 compatible = "ti,omap4-rng";
2267 reg = <0x0 0x2000>;
2268 interrupts = <111>;
2269 };
2270 };
2271
2272 target-module@13000 { /* 0x48313000, ap 97 62.0 */
2273 compatible = "ti,sysc";
2274 status = "disabled";
2275 #address-cells = <1>;
2276 #size-cells = <1>;
2277 ranges = <0x0 0x13000 0x1000>;
2278 };
2279
2280 target-module@15000 { /* 0x48315000, ap 94 56.0 */
2281 compatible = "ti,sysc";
2282 status = "disabled";
2283 #address-cells = <1>;
2284 #size-cells = <1>;
2285 ranges = <0x00000000 0x00015000 0x00001000>,
2286 <0x00001000 0x00016000 0x00001000>;
2287 };
2288
2289 target-module@18000 { /* 0x48318000, ap 74 4c.0 */
2290 compatible = "ti,sysc";
2291 status = "disabled";
2292 #address-cells = <1>;
2293 #size-cells = <1>;
2294 ranges = <0x0 0x18000 0x4000>;
2295 };
2296
2297 target-module@20000 { /* 0x48320000, ap 99 34.0 */
2298 compatible = "ti,sysc";
2299 status = "disabled";
2300 #address-cells = <1>;
2301 #size-cells = <1>;
2302 ranges = <0x0 0x20000 0x1000>;
2303 };
2304
2305 target-module@22000 { /* 0x48322000, ap 101 3e.0 */
2306 compatible = "ti,sysc";
2307 status = "disabled";
2308 #address-cells = <1>;
2309 #size-cells = <1>;
2310 ranges = <0x0 0x22000 0x1000>;
2311 };
2312
2313 target-module@24000 { /* 0x48324000, ap 103 68.0 */
2314 compatible = "ti,sysc";
2315 status = "disabled";
2316 #address-cells = <1>;
2317 #size-cells = <1>;
2318 ranges = <0x0 0x24000 0x1000>;
2319 };
2320 };
2321 };
2322
