bindings/usb/usb4604.txt

0001 SMSC USB4604 High-Speed Hub Controller
0002
0003 Required properties:
0004 - compatible: Should be "smsc,usb4604"
0005
0006 Optional properties:
0007 - reg: Specifies the i2c slave address, it is required and should be 0x2d
0008        if I2C is used.
0009 - reset-gpios: Should specify GPIO for reset.
0010 - initial-mode: Should specify initial mode.
0011                 (1 for HUB mode, 2 for STANDBY mode)
0012
0013 Examples:
0014         usb-hub@2d {
0015                 compatible = "smsc,usb4604";
0016                 reg = <0x2d>;
0017                 reset-gpios = <&gpx3 5 1>;
0018                 initial-mode = <1>;
0019         };