0001 ltc2978
0002
0003 Required properties:
0004 - compatible: should contain one of:
0005 * "lltc,ltc2972"
0006 * "lltc,ltc2974"
0007 * "lltc,ltc2975"
0008 * "lltc,ltc2977"
0009 * "lltc,ltc2978"
0010 * "lltc,ltc2979"
0011 * "lltc,ltc2980"
0012 * "lltc,ltc3880"
0013 * "lltc,ltc3882"
0014 * "lltc,ltc3883"
0015 * "lltc,ltc3884"
0016 * "lltc,ltc3886"
0017 * "lltc,ltc3887"
0018 * "lltc,ltc3889"
0019 * "lltc,ltc7880"
0020 * "lltc,ltm2987"
0021 * "lltc,ltm4664"
0022 * "lltc,ltm4675"
0023 * "lltc,ltm4676"
0024 * "lltc,ltm4677"
0025 * "lltc,ltm4678"
0026 * "lltc,ltm4680"
0027 * "lltc,ltm4686"
0028 * "lltc,ltm4700"
0029 - reg: I2C slave address
0030
0031 Optional properties:
0032 - regulators: A node that houses a sub-node for each regulator controlled by
0033 the device. Each sub-node is identified using the node's name, with valid
0034 values listed below. The content of each sub-node is defined by the
0035 standard binding for regulators; see regulator.txt.
0036
0037 Valid names of regulators depend on number of supplies supported per device:
0038 * ltc2972 vout0 - vout1
0039 * ltc2974, ltc2975 : vout0 - vout3
0040 * ltc2977, ltc2979, ltc2980, ltm2987 : vout0 - vout7
0041 * ltc2978 : vout0 - vout7
0042 * ltc3880, ltc3882, ltc3884, ltc3886, ltc3887, ltc3889 : vout0 - vout1
0043 * ltc7880 : vout0 - vout1
0044 * ltc3883 : vout0
0045 * ltm4664 : vout0 - vout1
0046 * ltm4675, ltm4676, ltm4677, ltm4678 : vout0 - vout1
0047 * ltm4680, ltm4686 : vout0 - vout1
0048 * ltm4700 : vout0 - vout1
0049
0050 Example:
0051 ltc2978@5e {
0052 compatible = "lltc,ltc2978";
0053 reg = <0x5e>;
0054 regulators {
0055 vout0 {
0056 regulator-name = "FPGA-2.5V";
0057 };
0058 vout2 {
0059 regulator-name = "FPGA-1.5V";
0060 };
0061 };
0062 };
