Back to home page

LXR

 
 

    


0001 #
0002 # Makefile for the Linux filesystems.
0003 #
0004 # 14 Sep 2000, Christoph Hellwig <hch@infradead.org>
0005 # Rewritten to use lists instead of if-statements.
0006 # 
0007 
0008 obj-y :=        open.o read_write.o file_table.o super.o \
0009                 char_dev.o stat.o exec.o pipe.o namei.o fcntl.o \
0010                 ioctl.o readdir.o select.o dcache.o inode.o \
0011                 attr.o bad_inode.o file.o filesystems.o namespace.o \
0012                 seq_file.o xattr.o libfs.o fs-writeback.o \
0013                 pnode.o splice.o sync.o utimes.o \
0014                 stack.o fs_struct.o statfs.o fs_pin.o nsfs.o
0015 
0016 ifeq ($(CONFIG_BLOCK),y)
0017 obj-y +=        buffer.o block_dev.o direct-io.o mpage.o
0018 else
0019 obj-y +=        no-block.o
0020 endif
0021 
0022 obj-$(CONFIG_PROC_FS) += proc_namespace.o
0023 
0024 obj-y                           += notify/
0025 obj-$(CONFIG_EPOLL)             += eventpoll.o
0026 obj-$(CONFIG_ANON_INODES)       += anon_inodes.o
0027 obj-$(CONFIG_SIGNALFD)          += signalfd.o
0028 obj-$(CONFIG_TIMERFD)           += timerfd.o
0029 obj-$(CONFIG_EVENTFD)           += eventfd.o
0030 obj-$(CONFIG_USERFAULTFD)       += userfaultfd.o
0031 obj-$(CONFIG_AIO)               += aio.o
0032 obj-$(CONFIG_FS_DAX)            += dax.o
0033 obj-$(CONFIG_FS_ENCRYPTION)     += crypto/
0034 obj-$(CONFIG_FILE_LOCKING)      += locks.o
0035 obj-$(CONFIG_COMPAT)            += compat.o compat_ioctl.o
0036 obj-$(CONFIG_BINFMT_AOUT)       += binfmt_aout.o
0037 obj-$(CONFIG_BINFMT_EM86)       += binfmt_em86.o
0038 obj-$(CONFIG_BINFMT_MISC)       += binfmt_misc.o
0039 obj-$(CONFIG_BINFMT_SCRIPT)     += binfmt_script.o
0040 obj-$(CONFIG_BINFMT_ELF)        += binfmt_elf.o
0041 obj-$(CONFIG_COMPAT_BINFMT_ELF) += compat_binfmt_elf.o
0042 obj-$(CONFIG_BINFMT_ELF_FDPIC)  += binfmt_elf_fdpic.o
0043 obj-$(CONFIG_BINFMT_FLAT)       += binfmt_flat.o
0044 
0045 obj-$(CONFIG_FS_MBCACHE)        += mbcache.o
0046 obj-$(CONFIG_FS_POSIX_ACL)      += posix_acl.o
0047 obj-$(CONFIG_NFS_COMMON)        += nfs_common/
0048 obj-$(CONFIG_COREDUMP)          += coredump.o
0049 obj-$(CONFIG_SYSCTL)            += drop_caches.o
0050 
0051 obj-$(CONFIG_FHANDLE)           += fhandle.o
0052 obj-$(CONFIG_FS_IOMAP)          += iomap.o
0053 
0054 obj-y                           += quota/
0055 
0056 obj-$(CONFIG_PROC_FS)           += proc/
0057 obj-$(CONFIG_KERNFS)            += kernfs/
0058 obj-$(CONFIG_SYSFS)             += sysfs/
0059 obj-$(CONFIG_CONFIGFS_FS)       += configfs/
0060 obj-y                           += devpts/
0061 
0062 obj-$(CONFIG_PROFILING)         += dcookies.o
0063 obj-$(CONFIG_DLM)               += dlm/
0064  
0065 # Do not add any filesystems before this line
0066 obj-$(CONFIG_FSCACHE)           += fscache/
0067 obj-$(CONFIG_REISERFS_FS)       += reiserfs/
0068 obj-$(CONFIG_EXT4_FS)           += ext4/
0069 # We place ext4 before ext2 so that clean ext3 root fs's do NOT mount using the
0070 # ext2 driver, which doesn't know about journalling!  Explicitly request ext2
0071 # by giving the rootfstype= parameter.
0072 obj-$(CONFIG_EXT2_FS)           += ext2/
0073 obj-$(CONFIG_JBD2)              += jbd2/
0074 obj-$(CONFIG_CRAMFS)            += cramfs/
0075 obj-$(CONFIG_SQUASHFS)          += squashfs/
0076 obj-y                           += ramfs/
0077 obj-$(CONFIG_HUGETLBFS)         += hugetlbfs/
0078 obj-$(CONFIG_CODA_FS)           += coda/
0079 obj-$(CONFIG_MINIX_FS)          += minix/
0080 obj-$(CONFIG_FAT_FS)            += fat/
0081 obj-$(CONFIG_BFS_FS)            += bfs/
0082 obj-$(CONFIG_ISO9660_FS)        += isofs/
0083 obj-$(CONFIG_HFSPLUS_FS)        += hfsplus/ # Before hfs to find wrapped HFS+
0084 obj-$(CONFIG_HFS_FS)            += hfs/
0085 obj-$(CONFIG_ECRYPT_FS)         += ecryptfs/
0086 obj-$(CONFIG_VXFS_FS)           += freevxfs/
0087 obj-$(CONFIG_NFS_FS)            += nfs/
0088 obj-$(CONFIG_EXPORTFS)          += exportfs/
0089 obj-$(CONFIG_NFSD)              += nfsd/
0090 obj-$(CONFIG_LOCKD)             += lockd/
0091 obj-$(CONFIG_NLS)               += nls/
0092 obj-$(CONFIG_SYSV_FS)           += sysv/
0093 obj-$(CONFIG_CIFS)              += cifs/
0094 obj-$(CONFIG_NCP_FS)            += ncpfs/
0095 obj-$(CONFIG_HPFS_FS)           += hpfs/
0096 obj-$(CONFIG_NTFS_FS)           += ntfs/
0097 obj-$(CONFIG_UFS_FS)            += ufs/
0098 obj-$(CONFIG_EFS_FS)            += efs/
0099 obj-$(CONFIG_JFFS2_FS)          += jffs2/
0100 obj-$(CONFIG_UBIFS_FS)          += ubifs/
0101 obj-$(CONFIG_AFFS_FS)           += affs/
0102 obj-$(CONFIG_ROMFS_FS)          += romfs/
0103 obj-$(CONFIG_QNX4FS_FS)         += qnx4/
0104 obj-$(CONFIG_QNX6FS_FS)         += qnx6/
0105 obj-$(CONFIG_AUTOFS4_FS)        += autofs4/
0106 obj-$(CONFIG_ADFS_FS)           += adfs/
0107 obj-$(CONFIG_FUSE_FS)           += fuse/
0108 obj-$(CONFIG_OVERLAY_FS)        += overlayfs/
0109 obj-$(CONFIG_ORANGEFS_FS)       += orangefs/
0110 obj-$(CONFIG_UDF_FS)            += udf/
0111 obj-$(CONFIG_SUN_OPENPROMFS)    += openpromfs/
0112 obj-$(CONFIG_OMFS_FS)           += omfs/
0113 obj-$(CONFIG_JFS_FS)            += jfs/
0114 obj-$(CONFIG_XFS_FS)            += xfs/
0115 obj-$(CONFIG_9P_FS)             += 9p/
0116 obj-$(CONFIG_AFS_FS)            += afs/
0117 obj-$(CONFIG_NILFS2_FS)         += nilfs2/
0118 obj-$(CONFIG_BEFS_FS)           += befs/
0119 obj-$(CONFIG_HOSTFS)            += hostfs/
0120 obj-$(CONFIG_CACHEFILES)        += cachefiles/
0121 obj-$(CONFIG_DEBUG_FS)          += debugfs/
0122 obj-$(CONFIG_TRACING)           += tracefs/
0123 obj-$(CONFIG_OCFS2_FS)          += ocfs2/
0124 obj-$(CONFIG_BTRFS_FS)          += btrfs/
0125 obj-$(CONFIG_GFS2_FS)           += gfs2/
0126 obj-$(CONFIG_F2FS_FS)           += f2fs/
0127 obj-y                           += exofs/ # Multiple modules
0128 obj-$(CONFIG_CEPH_FS)           += ceph/
0129 obj-$(CONFIG_PSTORE)            += pstore/
0130 obj-$(CONFIG_EFIVAR_FS)         += efivarfs/