Back to home page

LXR

 
 

    


0001 #
0002 # Makefile for the Linux kernel device drivers.
0003 #
0004 # 15 Sep 2000, Christoph Hellwig <hch@infradead.org>
0005 # Rewritten to use lists instead of if-statements.
0006 #
0007 
0008 obj-y                           += irqchip/
0009 obj-y                           += bus/
0010 
0011 obj-$(CONFIG_GENERIC_PHY)       += phy/
0012 
0013 # GPIO must come after pinctrl as gpios may need to mux pins etc
0014 obj-$(CONFIG_PINCTRL)           += pinctrl/
0015 obj-$(CONFIG_GPIOLIB)           += gpio/
0016 obj-y                           += pwm/
0017 obj-$(CONFIG_PCI)               += pci/
0018 obj-$(CONFIG_PARISC)            += parisc/
0019 obj-$(CONFIG_RAPIDIO)           += rapidio/
0020 obj-y                           += video/
0021 obj-y                           += idle/
0022 
0023 # IPMI must come before ACPI in order to provide IPMI opregion support
0024 obj-y                           += char/ipmi/
0025 
0026 obj-$(CONFIG_ACPI)              += acpi/
0027 obj-$(CONFIG_SFI)               += sfi/
0028 # PnP must come after ACPI since it will eventually need to check if acpi
0029 # was used and do nothing if so
0030 obj-$(CONFIG_PNP)               += pnp/
0031 obj-y                           += amba/
0032 
0033 obj-y                           += clk/
0034 # Many drivers will want to use DMA so this has to be made available
0035 # really early.
0036 obj-$(CONFIG_DMADEVICES)        += dma/
0037 
0038 # SOC specific infrastructure drivers.
0039 obj-y                           += soc/
0040 
0041 obj-$(CONFIG_VIRTIO)            += virtio/
0042 obj-$(CONFIG_XEN)               += xen/
0043 
0044 # regulators early, since some subsystems rely on them to initialize
0045 obj-$(CONFIG_REGULATOR)         += regulator/
0046 
0047 # reset controllers early, since gpu drivers might rely on them to initialize
0048 obj-$(CONFIG_RESET_CONTROLLER)  += reset/
0049 
0050 # tty/ comes before char/ so that the VT console is the boot-time
0051 # default.
0052 obj-y                           += tty/
0053 obj-y                           += char/
0054 
0055 # iommu/ comes before gpu as gpu are using iommu controllers
0056 obj-$(CONFIG_IOMMU_SUPPORT)     += iommu/
0057 
0058 # gpu/ comes after char for AGP vs DRM startup and after iommu
0059 obj-y                           += gpu/
0060 
0061 obj-$(CONFIG_CONNECTOR)         += connector/
0062 
0063 # i810fb and intelfb depend on char/agp/
0064 obj-$(CONFIG_FB_I810)           += video/fbdev/i810/
0065 obj-$(CONFIG_FB_INTEL)          += video/fbdev/intelfb/
0066 
0067 obj-$(CONFIG_PARPORT)           += parport/
0068 obj-$(CONFIG_NVM)               += lightnvm/
0069 obj-y                           += base/ block/ misc/ mfd/ nfc/
0070 obj-$(CONFIG_LIBNVDIMM)         += nvdimm/
0071 obj-$(CONFIG_DEV_DAX)           += dax/
0072 obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf/
0073 obj-$(CONFIG_NUBUS)             += nubus/
0074 obj-y                           += macintosh/
0075 obj-$(CONFIG_IDE)               += ide/
0076 obj-$(CONFIG_SCSI)              += scsi/
0077 obj-y                           += nvme/
0078 obj-$(CONFIG_ATA)               += ata/
0079 obj-$(CONFIG_TARGET_CORE)       += target/
0080 obj-$(CONFIG_MTD)               += mtd/
0081 obj-$(CONFIG_SPI)               += spi/
0082 obj-$(CONFIG_SPMI)              += spmi/
0083 obj-$(CONFIG_HSI)               += hsi/
0084 obj-y                           += net/
0085 obj-$(CONFIG_ATM)               += atm/
0086 obj-$(CONFIG_FUSION)            += message/
0087 obj-y                           += firewire/
0088 obj-$(CONFIG_UIO)               += uio/
0089 obj-$(CONFIG_VFIO)              += vfio/
0090 obj-y                           += cdrom/
0091 obj-y                           += auxdisplay/
0092 obj-$(CONFIG_PCCARD)            += pcmcia/
0093 obj-$(CONFIG_DIO)               += dio/
0094 obj-$(CONFIG_SBUS)              += sbus/
0095 obj-$(CONFIG_ZORRO)             += zorro/
0096 obj-$(CONFIG_ATA_OVER_ETH)      += block/aoe/
0097 obj-$(CONFIG_PARIDE)            += block/paride/
0098 obj-$(CONFIG_TC)                += tc/
0099 obj-$(CONFIG_UWB)               += uwb/
0100 obj-$(CONFIG_USB_PHY)           += usb/
0101 obj-$(CONFIG_USB)               += usb/
0102 obj-$(CONFIG_PCI)               += usb/
0103 obj-$(CONFIG_USB_GADGET)        += usb/
0104 obj-$(CONFIG_SERIO)             += input/serio/
0105 obj-$(CONFIG_GAMEPORT)          += input/gameport/
0106 obj-$(CONFIG_INPUT)             += input/
0107 obj-$(CONFIG_RTC_LIB)           += rtc/
0108 obj-y                           += i2c/ media/
0109 obj-$(CONFIG_PPS)               += pps/
0110 obj-y                           += ptp/
0111 obj-$(CONFIG_W1)                += w1/
0112 obj-y                           += power/
0113 obj-$(CONFIG_HWMON)             += hwmon/
0114 obj-$(CONFIG_THERMAL)           += thermal/
0115 obj-$(CONFIG_WATCHDOG)          += watchdog/
0116 obj-$(CONFIG_MD)                += md/
0117 obj-$(CONFIG_BT)                += bluetooth/
0118 obj-$(CONFIG_ACCESSIBILITY)     += accessibility/
0119 obj-$(CONFIG_ISDN)              += isdn/
0120 obj-$(CONFIG_EDAC)              += edac/
0121 obj-$(CONFIG_EISA)              += eisa/
0122 obj-y                           += lguest/
0123 obj-$(CONFIG_CPU_FREQ)          += cpufreq/
0124 obj-$(CONFIG_CPU_IDLE)          += cpuidle/
0125 obj-y                           += mmc/
0126 obj-$(CONFIG_MEMSTICK)          += memstick/
0127 obj-$(CONFIG_NEW_LEDS)          += leds/
0128 obj-$(CONFIG_INFINIBAND)        += infiniband/
0129 obj-$(CONFIG_SGI_SN)            += sn/
0130 obj-y                           += firmware/
0131 obj-$(CONFIG_CRYPTO)            += crypto/
0132 obj-$(CONFIG_SUPERH)            += sh/
0133 ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
0134 obj-y                           += clocksource/
0135 endif
0136 obj-$(CONFIG_DCA)               += dca/
0137 obj-$(CONFIG_HID)               += hid/
0138 obj-$(CONFIG_PPC_PS3)           += ps3/
0139 obj-$(CONFIG_OF)                += of/
0140 obj-$(CONFIG_SSB)               += ssb/
0141 obj-$(CONFIG_BCMA)              += bcma/
0142 obj-$(CONFIG_VHOST_RING)        += vhost/
0143 obj-$(CONFIG_VHOST)             += vhost/
0144 obj-$(CONFIG_VLYNQ)             += vlynq/
0145 obj-$(CONFIG_STAGING)           += staging/
0146 obj-y                           += platform/
0147 
0148 obj-$(CONFIG_MAILBOX)           += mailbox/
0149 obj-$(CONFIG_HWSPINLOCK)        += hwspinlock/
0150 obj-$(CONFIG_REMOTEPROC)        += remoteproc/
0151 obj-$(CONFIG_RPMSG)             += rpmsg/
0152 
0153 # Virtualization drivers
0154 obj-$(CONFIG_VIRT_DRIVERS)      += virt/
0155 obj-$(CONFIG_HYPERV)            += hv/
0156 
0157 obj-$(CONFIG_PM_DEVFREQ)        += devfreq/
0158 obj-$(CONFIG_EXTCON)            += extcon/
0159 obj-$(CONFIG_MEMORY)            += memory/
0160 obj-$(CONFIG_IIO)               += iio/
0161 obj-$(CONFIG_VME_BUS)           += vme/
0162 obj-$(CONFIG_IPACK_BUS)         += ipack/
0163 obj-$(CONFIG_NTB)               += ntb/
0164 obj-$(CONFIG_FMC)               += fmc/
0165 obj-$(CONFIG_POWERCAP)          += powercap/
0166 obj-$(CONFIG_MCB)               += mcb/
0167 obj-$(CONFIG_PERF_EVENTS)       += perf/
0168 obj-$(CONFIG_RAS)               += ras/
0169 obj-$(CONFIG_THUNDERBOLT)       += thunderbolt/
0170 obj-$(CONFIG_CORESIGHT)         += hwtracing/coresight/
0171 obj-y                           += hwtracing/intel_th/
0172 obj-$(CONFIG_STM)               += hwtracing/stm/
0173 obj-$(CONFIG_ANDROID)           += android/
0174 obj-$(CONFIG_NVMEM)             += nvmem/
0175 obj-$(CONFIG_FPGA)              += fpga/